高速可見光發光二極體

以作者查詢圖書館館藏

、以作者查詢臺灣博碩士

、以作者查詢全國書目

、勘誤回報

、線上人數：25

、訪客IP：18.188.76.209

姓名

陳正雄(Cheng-Hsiung Chen) 查詢紙本館藏

畢業系所

電機工程學系

論文名稱

高速可見光發光二極體
(High speed visible light light-emissing-diode(LED))

相關論文

★ 氮化鎵串接式綠光發光二極體在超高溫(200 ℃)操作的高速表現之和其內部之載子動力學	★ 32Gbit/s 低耗能 850nm InAlGaAs 應變量子井面射型雷射
★ 具有大面積且在高靈敏度、低暗電流操作下具有頻寬增強效應的10 Gbit/sec平面式 InAlAs 累增崩潰光二極體	★ 應用串接式技術達到超高飽和電流-頻寬乘積(7500mA-GHz,75mA,100GHz)的近彈道傳輸光偵測器
★ 利用鋅擴散方式在半絕緣(GaAs)基板上製作可室溫操作、高速且低漏電流的InAs光檢測器	★ 應用超寬頻光子傳送混波器達到遠距分佈及調變的20Gbit/s無誤碼無線振幅偏移調變資料傳輸於W-頻帶
★ 具有同時高速資料傳輸及產生直流電功率的砷化鎵/磷化銦鎵的雷射功率轉換器	★ 超高速(>1Gb/s)可見光發光二極體應用於塑膠光纖通訊及內部載子動力學的研究
★ 具有超低耗能,傳輸資料量比值在850nm波段超高速(40 Gb/s)面射型雷射	★ 超高速(~300GHz)光偵測器的製造與其在毫米波生物晶片上的應用
★ 超高速覆晶式(>300GHz)高功率(~mW)光偵測器製作與量測	★ 具有單空間模態,低發散角,高功率的鋅擴散二維850nm面射型雷射陣列
★ 應用於850到1550 nm波長光連結且具有高速,高效率和大面積的p-i-n光偵測器	★ 應用於中距離(2km)至短距離光連結知單模態、高速、高輸出光功率的850nm波段面射型雷射
★ 應用在光連接具有高可靠度高速(>25Gbit/sec) 850光波段的垂直共振腔雷射	★ 具有高可靠度/高功率輸出與直流到次兆赫茲 (≧300GHz)操作頻寬的超高速光偵測器和其覆晶式封裝設計與分析

檔案

[Endnote RIS 格式]

[Bibtex 格式]

[相關文章]

[文章引用]

[完整記錄]

[館藏目錄]

[檢視]

[下載]

本電子論文使用權限為同意立即開放。
已達開放權限電子全文僅授權使用者為學術研究之目的，進行個人非營利性質之檢索、閱讀、列印。
請遵守中華民國著作權法之相關規定，切勿任意重製、散佈、改作、轉貼、播送，以免觸法。

摘要(中)

本論文針對用於短距離光纖通訊綠光波段(520nm)之高速發光二極體研究及製作。我們採用阻障層(barrier)有矽(Si)摻雜及無摻雜之複合結構來製作氮化鎵/氮化銦鎵(GaN/InGaN)多重量子井(MQW)試片，以及使用具有76μm直徑之電流侷限結構。由量測結果發現此結構具有330MHz極佳的電-光(electrical-to-optical) 3-dB頻寬，此調制速度被多重量子井的自發性複合生命時間(spontaneous recombination lifetime)所限制。一個合理的264μW耦光功率也被同時的實現在2mm直徑、0.5數值孔徑(numerical aperture)的塑膠光纖上。

摘要(英)

We demonstrate a high-speed GaN based Light-Emitting-Diode (LED) at a wavelength of around 520nm for the application to plastic optical fiber (POF) communication. By using a combination of n-type doping and undoped InxGa1-xN/GaN based multiple-quantum-wells (MQWs), and a 76μm in diameter current-confined aperture structure we can obtain an extremely high electrical-to-optical (E-O) 3-dB bandwidth (~330MHz), which is limited by the spontaneous recombination lifetime of the MQWs. A reasonable coupled power (~185μW) can be simultaneously achieved for a 2mm in diameter POF with a 0.5 numerical aperture (N.A.).

關鍵字(中)

★ 高速
★ 發光二極體

關鍵字(英)

★ LED
★ light-emissing-diode
★ high speed

論文目次

中文摘要 I
英文摘要 II
誌謝 III
目錄 IV
圖目錄 VI
表目錄 VIII
第一章導論 1
§1-1.光纖通訊的歷史 1
§1-2.光纖通訊架構與原理 2
§1-3.光纖通訊的優點 3
§1-4.塑膠光纖之發展趨勢 5
§1-5.塑膠光纖損耗及光源 8
§1-6.光纖通訊的應用 11
§1-7.結論及論文架構 14
第二章高速可見光發光二極體之原理介紹與討論 15
§2-1.發光二極體應用於光纖通訊介紹 15
§2-2.發光二極體工作原理 16
§2-3.應用於塑膠光纖通訊用發光二極體介紹 19
§2-4.高速發光二極體調制原理 21
§2-5.高速發光二極體調制限制 25
§2-6.高速發光二極體多量子井結構 28
第三章高速可見光發光二極體元件結構及製程 29
§3-1.高速可見光發光二極體元件試片結構 29
§3-2.氮化鎵發光二極體製作流程 30
§3-3.元件電流侷限大小的定義 40
第四章高速可見光發光二極體量測結果與討論 41
§4-1.高速可見光發光二極體之電特性量測 41
§4-2.高速可見光發光二極體之光特性量測 46
第五章結論與未來發展 52
§5-1.高速可見光發光二極體之結論與未來發展 52
參考資料 53
著作列表 57

參考文獻

[1]www.netsys.com.tw/Chinese/cSupport.htm
[2]Present State-of-the-art of Plastic Optical Fiber (POF)Components and Systems© 2004, Plastic Optical Fiber Trade Organization.
[3]新禾Toshiba : http://www.toshiba-taiwan.com
[4]Steele, Robert “High bandwidths for plastic optical fiber”,Laser Focus World,pp.32-34,January 1995.
[5]H. Schopp ”Principles and Applications of the MOST Network” , Meeting of the ITG-Fokusprojektes ITF , Fraukfurt, May11,2001.
[6]Club des Fibres Optiques Plastiques (CFOP)France. ”Plastic Optical Fibres-Practical Application”,edited by J.Marcou,John Wiley & Sons,Masson,1997.
[7]T. Yoshimura, and Y Koyamada. “Analysis of Transmission Bandwidth characteristicsof SI-POF.” POF-2003 proceedings. P 119, September 15-17,2003 in Seattle.Available from Information Gatekeepers, Inc.
[8]L. Blyler, V.R. White, R. Ratagini, and M. Park. “Perfluorinated POF: out of the lab, into the real world.” POF-2003 proceedings. P 16, September 15-17,2003 in Seattle.
[9]G. Yabre “Theoretical investigation on the dispersion of graded-index polymer optical fibers” IEEE Journal of Lightwave Technology, VOL. 18, NO. 6, JUNE 2000.
[10]http://people.deas.harvard.edu/~jones/cscie129/nu_lectures/lecture3%20/lecture_3.html
[11]李世鴻, “半導體工程原理”,p.360,全威圖書有限公司.
[12]S.O.Kasap “Optoelectronics and Photonics Principles and Practices” Pearson press.
[13]E.Fred Schubert “Light-Emitting Diodes” Cambridge university press.
[14]Joseph C.Palais“Fiber Optical Communications” fourth edition.
[15]Milan S. Minsky, Shigefusa Chichibu,Siegfried B. Fleischer, Amber C. Abare, John E. Bowers, “Optical Properties of InGaN/GaN Quantum Wells with Si Doped Barriers ” Jpn. J. Appl. Phys., vol. 37, pp. 1362-1364, Mar. , 1998.
[16]R. Wirth, B. Mayer, S. Kugler, K. Streubel, “Fast LEDs for polymer optical fiber communication at 650nm” Proc. of SPIE Vol.6013 P.60130F, 2005.
[17]J.-W. Shi, H.-Y. Huang, J.-K. Sheu, C.-H. Chen, Y.-S. Wu, and W.-C. Lai, “The improvement in Modulation Speed of GaN-Based Light-Emitting Diode (LED) by Use of n-Type Barrier Doping for Plastic Optical Fiber (POF) Communication” IEEE Photon. Technol. Lett., vol. 18, pp. 1636-1638, Aug., 2006.
[18]L. W. Wu, S. J. Chang, T. C. Wen, Y. K. Su, J. F. Chen, W. C. Lai, C. H. Kuo, C. H. Chen, and J. K. Sheu, “Influence of Si-doping on the Characteristics of InGaN-GaN Multiple Quantum-Well Blue Light-Emitting Diodes,” IEEE Journal of Quantum Electronics, vol. 38, pp. 446-450, May, 2002.
[19]K. Ikeda, S. Horiuchi, T. Tanaka, and W. Susaki, “Design Parameters of Frequency Response of GaAs-(Ga,Al)As Double Heterostructure LED’s for optical Communications,” IEEE Trans. Electron Device, vol. ED-24, pp. 1001-1005, July, 1977.
[20]S. Nakamura, N. Iwasa, M. Senoh, and T. Mukai, “Hole Compensation Mechanism of P-Type GaN Films”,Jpn. J. Appl. Phys. 31,1258 (1992).
[21]M. S. Minsky, M. White, and E. L. Hu,“Room-temperature photoenhanced wet etching of GaN”,Appl. Phys. Lett. 68, 1531 (1996).
[22]C. Youtsey , I. Adesida , L. T. Romano and G. Bulman, “Smooth n-type GaN surfaces by photoenhanced wet etching”,Appl. Phys. Lett. 72, 560 (1997).
[23]J. K. Sheu , Y. K. Su ,G. C. Chi ,W. C. Chen, C. Y. Chen, C. N. Huang,J. M. Hong,Y. C. Yu, C. W. Wang, and E. K. Lin,“The effect of thermal annealing on the Ni/Au contact of p-type GaN”, J. Appl. Phys. 83, 3172 (1998).
[24]Li-Chien Chen, Fu-Rong Chen, Ji-Jung Kai,Li Chang,Jin-Kuo Ho, Charng-Shyang Jong, Chien C. Chiu, Chao-Nien Huang, Chin-Yuen Chen, and Kwang-Kuo Shih,“Microstructural investigation of oxidized Ni/Au ohmic contact to p-type GaN ”, J. Appl. Phys. 86, 3826 (1999).
[25]Jin-Kuo Ho , Charng-Shyang Jong, Chien C. Chiu, Chao-Nien Huang, Chin-Yuen Chen, and Kwang-Kuo Shih, “Low-resistance ohmic contacts to p-type GaN”, Appl. Phys. Lett. 74, 1275 (1999).
[26]Y. Koide,S. Yamasaki, S. Nagai, J. Umezaki, M. Koike and Masanori Murakami,“Effects of surface treatments and metal work functions on electrical properties at p-GaN/metal interfaces”, J. Appl. Phys. 81, 1315 (1997).
[27]M. Akhter, P. Maaskant, B. Roycroft, B. Corbett, P. de Mierry, B. Beaumont and K. Panzer, “200Mbit/s data transmission through 100m of plastic fiber with nitride LEDs,” Electron. Lett., vol. 38, pp.1457-1458, Nov., 2002.
[28]T. Matsuoka, T. Ito and T. Kaino, “First plastic optical fiber transmission experiment using 520nm LEDs with intensity modulation/direct detection,”Electron. Lett., vol. 36, pp.1836-1837, Oct., 2000.
[29]P. Bhattacharya, “Semiconductor Optoelectronic Devices”, pp. 232, Pearson Education, Inc., Taiwan, 2003.

指導教授

許晉瑋(Jin-Wei Shi)

審核日期

2007-7-13

推文