參考文獻 |
Adil, G. K., Rajamani, D. and Strong, D., 1996, “Cell formation considering alternate routings,” International Journal of Production Research, vol. 34, no. 5, pp. 1361-1380.
Askin, R. G. and K.S. Chiu ,1990, “A graph Partitioning Procedure for Machine Assignment and Cell Formation in Group Technology, ” International Journal of Production Research, Vol. 28, No.8, pp.1555-1572
Askin, R. G., Gresswell, S.H., Goldberg, J. B. and Vakharia, A. J., 1991, “A Hamiltonian path approach to reordering the part-machine matrix for cellular manufacturing,” International Journal of Production Research, Vol. 29, No.10, pp.1081-1100
Ballakur , A., and Steudel,J.J., 1987, A machine-cell utilization based heuristic for designing cellular manufacturing systems. International Journal of Production Research, Vol.25, No.5, pp.639-665
Benjaafar, S., 1992, “Modeling and analysis of flexibility in manufacturing systems,” Ph.D. Thesis, School of Industrial Engineering, Purdue University, West Lafayette, IN47907, USA.
Bezdek, J. C., 1981,”Pattern Recognition with Fuzzy Objective Function Algorithms(New York:Plenum Press)
Boctor , F. F., 1996,” The minimum cost, machine-part cell formation problem,” International Journal of Production Research, Vo.34, No.4, pp.1045-1063
Burbidge, J. L., 1971, “Production flow analysis,” The Production Engineer, April/May, pp. 139-152.
Carpenter, G. A. and Grossberg, S., 1987, “A massively parallel architecture for a self-organizing neural pattern recognition machine,” Computer Vision Graphics Image Process, vol. 37, pp. 54-115.
Carpenter, G. A. and Grossberg, S., 1987, “ART2:self-organization of stable category recognition codes for analog input patterns,” Applied Optics, vol. 26, pp. 4919-4930.
Carpenter, G. A. and Grossberg, S., 1990, “ART3:hierarchical search using chemical transmitters in self-organization pattern recognition architectures,” Neural Networks, vol. 3, no.2, pp. 129-152.
Carpenter, G. A. and Grossberg, S., 1991, “Fuzzy ART:Fast stable learning and categorization of analog patterns by an adaptive resonance system,” Neural Networks, vol. 4, pp. 759-771.
Chan, H. M. and Miller, D. A., 1982, “Direct clustering algorithm for group formation in cellular manufacturing,” Journal of Manufacturing Systems, vol. 1, no. 10, pp. 65-74.
Chandrasekharan, M. P. and Rajagopalan, R., 1986, “MDROC: an extension of rank order clustering for group technology,” International Journal of Production Research, vol. 24, no. 5, pp. 1221-1233.
Chandrasekharan, M. P. and Rajagopalan, R., 1986, “ZODIAC: an algorithm for concurrent formation of part-families and machine-cells,” International Journal of Production Research, vol. 25, no. 6, pp. 835-850
Chu, C. H., 1997, “An improved neural network for manufacturing cell formation,” Decision Support Systems, vol. 20, pp. 279-295.
Chu, C. H. and Hayya, J. C., 1991, “A fuzzy Clustering approach to manufacturing cell formation,” International Journal of Production Research, vol. 29, no. 7, pp.1475-1487
Chu, C. H. and Tsai, M., 1990, "A comparison of three array-based clustering techniques for manufacturing cell formation,” International Journal of Production Research, vol. 28, no. 8, pp.1417-1433
CPLEX, 1999, Using the CPLEX Callable Library and CPLEX Mixed Integer Library. (Incline Village, NV: CPLEX Optimization).
Djassemi, M., 2000,” An efficient CNC programming approach based on group technology,” Journal of Manufacturing Systems, Vol.19, No.3, pp213-214
El-Essawy, I. G. K. and Torrance, J., 1972, “Component flow analysis—an affective approach to production system’s design,” The Production Engineer, Amy, pp. 165-170.
Gomory, R.E. and Hu, T.C., 1961, “Multi-terminal network flows”, SIAM Journal of Mathematics, Vol. 9, pp.551-570
Gunasingh, K. R. and Lashkari, R. S., 1989, “Machine grouping problem in cellular manufacturing systems—an integer programming approach,” International Journal of Production Research, vol. 27, no. 9, pp. 1465-1473.
Ho, Y. C. and Moodie, C. L., 1996, “Solving cell formation problems in a manufacturing environment with flexible processing and outing capabilities,” International Journal of Production Research, vol. 34, no. 10, pp. 2901-2923.
Islam, K. M. S. and Sarker, B. R., 2000, “A similarity coefficient measure and machine-parts grouping in cellular manufacturing systems,” International Journal of Production Research, vol. 38, no. 3, pp.699-720
Jaccard, P., 1908, Nouvelles recherches sur la distribution florale. Bull.Soc.Vaud.Sci. Nat., Vol. 44, pp.223-270
Jacobs, F. R and Muth, J.F., 1988,”Large scale clustering for group technology part family and tooling analysis,” ORSA/TIMS Joint National Meeting, Denver, Oct., pp.23-26
Josien, K. and Liao, T. W., 2000, “Integrated use of fuzzy c-means and fuzzy KNN for GT part family and machine cell formation,” International Journal of Production Research, vol.38, no. 15, pp.3513-3536
Kamal, S. and Burke, L. I., 1996, “A new neural network-based clustering algorithm for group technology,” International Journal of Production Research, vol. 34, no. 4, pp. 919-946.
Kao, Y. and Moon, Y. B., 1991, “A unified group technology implementation using the backpropagation learning rule of neural networks,” Computers Industrial Engineering, vol. 20, no. 4, pp. 425-437.
Karacaplilidis, N., 2000, “Integrating new information and communication technology in a group decision system,” International Transactions in Operation Research, Vol. 7, pp.487-507
King, J. R. and Nakornchai, V., 1982, “Machine-component group formation in group technology: review and extension,” International Journal of Production Research, vol. 20, no. 2, pp. 117-133.
King, J. R., 1980, “Machine-component grouping in production flow analysis: an approach using a rank order clustering algorithm,” International Journal of Production Research, vol. 18, no. 2, pp. 213-232.
Khan, M and Bhaba, R.S., 2000, “A comparison of existing grouping efficiency measures and a new weighted grouping efficiency measure” IIE Transactions, Vol. 33, No.1 ,pp.11-17
Kovelis, P., Chiang, W.C.,and Fitzsimmons,1992, “Simulated Annealing for machine layout problems in Flexible Manufacturing Systems,” European Journal of Operational Research, vol. 57, no. 2, pp. 203-223
Kraemer, K., & King, J. ,1988. “Computer-based systems for group decision support: Status of use and problems in development.” Computing Surveys, Vol. 20, No.2, pp.115-146.
Kumar, K. R., A. Kusiak, and A. Vannelli, 1986, “Grouping Parts and Component in Flexible Manufacturing Systems,“ European Journal of Operational Research, Vo.24, No.3, pp.387-397
Kusiak, A.,1988, “Expert systems for planning and scheduling manufacturing systems,” International Journal of Production Research, vol. 34, no. 2, pp. 113-130.
Kusiak, A. and Chung, Y., 1994, “Grouping parts with a neural network,” Journal of Manufacturing Systems, vol. 13, no. 4, pp. 262-275.
Kusiak, A. and Ibrahim, W. N., 1988, “Knowledge-based System for Group Technology (KGBT),” International Conference on Computer Integrated Manufacturing, New York, May, pp. 184-193.
Lin, G. Y. and Solberg, J. J., 1991, “Effectiveness of Flexible Routing Control,” International Journal of Flexible Manufacturing System, no. 3, pp. 189-211.
Lin, G. Y., 1993, “A distributed production control for intelligent manufacturing systems,” PhD thesis, Purdue University.
McCormick, W. T., P.J. Schweitzer, and T. E. White, 1972,” Problem Decomposition and Data Reorganization by a Cluster Technique”, Operations Research, Vol.20, pp.993-1009
McAuley, J., 1972, “Machine grouping for efficient production,” The Production Engineer, February, pp. 53-57.
Miltenburg, J and Zhang, W., 1991, “A comparative evaluation of nine well-known algorithms for solving the cell formation problem in group technology.” Journal of Operations Management, vol. 10, pp.44-72
Moon, Y. B. and Chi, S. C., 1991, “Generalized part family formation using neural network techniques,” Journal of Manufacturing Systems, vol. 11, no. 3, pp. 149-159.
Moon, Y. B., 1990, “An interactive activation and competition model for machine-part family formation in group technology,” Proceeding of the International Joint Conference on Neural Networks, Washington DC, vol. 2, pp. 667-670.
Mosier, C. T., 1985, “An experiment investigating the application of clustering procedures and similarity coefficients to the GT machine cell formation problem,” International Journal of Production Research, vol. 27, no. 10, pp. 1811-1835.
Mukhopadhyay, S. K., Babu, K. R. and Sai, K. V. V., 2000, “Modified Hamiltonian chain:a graph theoretic approach to group technology,” International Journal of Production Research, vol.38, no.11, pp.2459-2470
Piplani, P. and Talavage, J., 1995, “Launching and dispatching strategies for multi-criteria control of closed manufacturing systems with flexible routing capability,” International Journal of Production Research, vol. 33, no. 8, pp. 2181-2196.
Rajamani, D., Singh, N. and Aneja, Y. P., 1990, “Integrated design of cellular manufacturing systems in the presence of alternative process plans,” International Journal of Production Research, vol. 28, no. 8, pp. 1541-1554.
Rajagopalan, R., and L. Batra , 1975, “Design of cellular production systems- A graph theoretic approach, ” International Journal of Production Research, vol. 13, pp. 56-58.
Shanker, K. and Agrawal, A. K.,1997, “Models and solution methodologies for the generalized grouping problem in cellular manufacturing,” ” International Journal of Production Research, vol. 35, No.2, pp. 513-538
Shafer, S. M. and Roger, D. F. , 1993, “Similarity and distance measures for cellular manufacturing, part1:a survey, ” International Journal of Production Research, vol. 31, no. 5, pp. 1133-1142.
Singh, N. and Rajamani, D.,1996, “Cellular manufacturing systems: design, planning and control, Chapman & Hall, London.
Sneath, P.H.A.,1957, “The application of computers to Taxonomy,” Journal of General Microbiology, Vol. 17, pp.201-226
Seifoddini, Hamid, and Philip M. Wolfe, 1986, “Application of the similarity coefficient method in group technology,” IIE Transaction, Vol.18, No3, pp.271-277
Selvam, R.P and K.N. Balasubramanian,1985, “ Algorithmic grouping of operation sequences,” Engineering costs and production economics, Vol. 9, pp.125-134
Su, C. T. and Hsu, C. M., 1998, “Manufacturing cell formation using genetic algorithm VS. neural network,” Journal of Chinese Institute of Industrial Engineers, vol. 15, no. 2, pp. 127-139.
Suresh, N. C., Slomp, J. and Kaparthi, S., 1995, “The capacitated cell formation problem: a new hierarchical methodology,” International Journal of Production Research, vol. 33, no. 6, pp. 1761-1784.
Tam, K. Y., 1990, “An operation sequence based similarity coefficient for part families formations,” Journal of Manufacturing Systems, vol. 9, no. 1, pp. 55-68.
Vakharia, A. J. and Wemmerlov, U., 1990, “Designing a Cellular Manufacturing System: A Material Flow Approach Based on Operations Sequences,” IIE Transaction, vol. 22, no. 1, pp. 84-97.
Vannelli, A., and Kumar, K. R.,1986, A method for finding minimal bottleneck cells for grouping part-machine families.” International Journal of Production Research, Vo.24, No.2, pp.387-400
Vohra, T., Chen, D.-S., Chang, J.C. and Chen, H.-C., 1990,”A network approach to cell formation in cellular manufacturing”, International Journal of Production Research, Vo.28, pp.2075-2084
Wemmerlov , U., and Hyer, N. L.,1986, Procedures for the part-family/machine group identification problem in cellular manufacturing. Journal of Production Management, Vol.6, No.2, pp.125-147
Wemmerlov, U. and Johnson, D.J.,1997 ,”Cellular Manufacturing at 46 User Plants: Implementation Experiences and Performance Improvements.” International Journal of Production Research, Vol. 35 , pp.29-49.
Wei , J.C., and Kern, G.M.,1989, “Commonality analysis : a linear cell clustering algorithm for group technology,” International Journal of Production Research, Vo.28, No.12, pp.2053-2062
Wu, H. l., Venugopal, R. and Barash, M. M., 1986, “Design of cellular manufacturing system : a syntactice pattern recognition approach,” Journal of Manufacturing Systems, vol. 5, no. 2, pp. 81-87.
Wu, N. and Salvendy, G., 1999,”An efficient heuristic for the design of cellular manufacturing systems with multiple identical machines,” International Journal of Production Research, vol. 37, no.15, pp.3519-3540
Yoshikawa, K., Fukuta, T., Morukawa, K., Takahashi, K. and Nakamura, N., 1997, “A neural network approach to the cell formation problem,” The 14th International Conference on Production Research, Osaka Japan, August 4-8, pp. 1100-1103.
何應欽、林裕智, 1998, “在具製程與途程彈性之製造環境下之以類似係數為基礎的單元成型法,” 中國工業工程學會八十七年年會, 台灣彰化(大葉大學)。
何應欽、楊家興,1999, “在具製程與途程彈性之製造環境下之以機器使用機率為基礎的單元成型法,” 中國工業工程學會八十八年年會, 台灣新竹(清華大學)。
何應欽、曾照元, 2001,”在具製程與途程彈性的製造環境下之單元成型法的比較,國立中央大學工業管理研究所碩士論文。 |