摘要(英) |
In the scope of zoom lens, most of researches focus on traditional zoom lens system, which changes the effect focus by moving the lens along optical axis.But as the mechanical tolerance is too much, it is hard to move the lens, and will cause the image blurred.In order to amend this drawback, this research was investigated to change focus by rotating the spheral lens in substitution for the tradition ways and makes comparison of capabilities between them. |
參考文獻 |
[1]Gentle Peng, MULTI-FACET LENS COMPONENT;USP:5515206.
[2]孫文信,光學設計,中央大學光電所光學設計課程講義。
[3]孫文信,精調三階像差各分項目標值的鏡組優化設計,中央大學光電所博士論文,中華民國九十一年。
[3]林永昌,新型變焦鏡頭設計,中央大學光電所碩士論文,中華民國九十年。
[4]YoKo Kimura, Ayase-shi(Jp), Haruo Sato, Kawaguchi-shi(jp),TWO – LENS - GROUP ZOOM LENS SYSTEM;USP:20070070520.
[5]Shiger Hashimoto, LENS STRUCTURE HAVING A MOVABLE PORTION;USP:3951522.
[6]國家實驗研究院,光機電系統整合概論,儀器科技研究中心出版,2005。
[7]Raul R. Yoder, Jr., Opto-Mechanical System Design, Optical Group,Perkin-Elmer Corporation Danbury, Connecticut.
[8] Virendra N. Mahajan , Optical Imaging and Aberrations, SPIE PRESS,1998.
[9]張阜權,孫榮山,唐偉國,光學初版,凡異出版社,1995年。
[10]Kjell J. Gasvik, Optical Metrology Third Edition, JOHN WILEY & SONS, LTD, 2002.
[11]Robert D. Guenther, Modern Optics, DUKE University, New York Wiley,1990.
[12]Francis A. Jenkins, Harvey E. White, Fundamentals of Optics Fourth edition, McGRAW-HILL, 1981. 。
[13]Zemax原廠光學設計程式使手冊,訊技科技股份有限公司,2003年9月出版。
[14]CCD sensor DOLPHIN_F_145B data sheet。
[15]林致行,光學設計之專家系統,中央大學光電所碩士論文,中華民國94年。
[16]陳昭先,對給定初階像差目標值之光學薄透鏡組設計方法與應用,交通大學光電所碩士論文,中華民國86年。
[17]林瑞興,高解析度變焦數位相機鏡頭設計,元智大學電機工程研究所碩士論文,中華民國89年。
[18]王國權,變焦光謝統之設計與分析,台北科技大學光電技術研究所碩士論文,中華民國92年。
[19]Daniel Vukobratovich, OPTO-MECHANICAL DESIGN, Optical Sciences Center, 1968。
[20]井上 弘,变倍光学機構の設計技法,トリケップス,1990。 |