參考文獻 |
1. D.P. Russell and P.W.R. Beaumont, "Structure and Properties of Injection-Molded Nylon-6. Part 3 : Yielding and Fracture of Injection-Molded Nylon-6," Journal of Materials Science, Vol.15, 1980, pp.216-221.
2. S.A. Hitchen and S.L. Ogin, "Damage Accumulation During the Fatigue of an Injection Moulded Glass/Nylon Composite," Composites Science and Technology, Vol.47, 1993, pp. 83-89.
3. J.K. Kocsis and K. Friedrich, "Fracture Behavior of Injection-Molded Short and Long Glass Fiber-Polymide 6.6 Composites," Composites Science and Technology, Vol.32, 1988, pp.293-325.
4. H. Voss and K. Friedrich, "Influence of Short-Fiber Reinforcement on the Fracture Behaviour of a Bulk Liquid Crystal Polymer," Journal of Materials Science, Vol.21, 1986, pp.2889-2900.
5. P.J. Hogg, "The Influence of Flow-induced Anisotropy on the Impact Behavior of Injection-moulded Short-fibre Composites," Composites Science and Technology, Vol.29, 1987, pp.89-102.
6. T.L. Norman and C.T. Sun, "Delamination Growth in Composite Laminates with Adhensive Strips Subjected to Static and Impact Loading," Composites Science and Technology, Vol.46, 1993, pp.203-211.
7. T. Hirai, T. Katayama, M. Hirai and M. Yoneda, "Prediction for the Configuration of Fiber Orientation in Injection Moulding," Zairyo/Journal of the Society of Materials Science, Japan, Vol. 34, No. 378, 1985, pp. 256-261.
8. J.P. Greene and J.O. Wilkes, "Numerical Analysis of Injection Molding of Glass Fiber Reinforced Thermoplastics. Part 2: Fiber Orientation," Polymer Engineering and Science, Vol. 37, No. 6, 1997, pp. 1019-1035.
9. M. Gupta and K.K. Wang, "Fiber Orientation and Mechanical Properties of Short-Fiber-Reinforced Injection-Molding Composites: Simulated and Experimental Results," Polymer Composites, Vol. 14, No. 5, 1993, pp. 367-382.
10. B.N. Rao, S. Akbar and M.C. Altan, "Comparative Study on the Solution Techniques for Fiber Orientation in Two-Dimensional Converging and Diverging Flows," Journal of Thermoplastic Composite Materials, Vol. 4, No. 4, 1991, pp. 311-348.
11. T. Matsuoka, J. Takabatake, A. Koiwai, Y. Inoue, H. Takahashi and O. Kamigaito, "Analysis of Fiber Orientation in Injection Molding," Journal of the Japan Society of Powder and Powder Metallurgy, Vol. 36, No. 2, 1989, pp. 195-198.
12. C. Friedl and R. Brouwer, "Fibre Orientation Predition," Conference Proceedings In Search of Excellence 49th Annual Technical Conference, Brookfield, CT, USA, May 5-9 1991, pp. 326-329.
13. L.G. Reifschneider, H.U. Akay and F. Ladeinde, "Fiber Orientation Prediction for Three-Dimensional Injection and Compression Molded Parts," Computer Modeling and Simulation of Manufacturing Processes Winter Annual Meeting of the American Society of Mechanical Engineers, Dallas, TX, USA, Nov. 25-30 1990, pp. 129-137.
14. B.N. Rao, K.H. Seah and M.C. Altan, "Exact Solution of the Three-Dimensional Orientation Structure in a Geometrically Complex Mold Cavity," International Conference Proceedings of the 5th International Conference on Computer Aided Design in Composite Material Technology, Udine, Italy, 1996, pp. 223-231.
15. R.S. Bay and C.L. Tucker, "Fiber Orientation in Simple Injection Moldings. Part 1: Theory and Numerical Methods," Material Properties, Part Performance and Process Simulation Winter Annual Meeting of the American Society of Mechanical Engineers, New York, NY, USA, Dec. 1-6 1991, pp. 445-471.
16. C.F. Hung and Y.K. Shen, "Numerical Simulation of Fiber Orientation in Injection Mold Filling," International Communications in Heat and Mass Transfer, Vol. 22, No. 6, 1995, pp. 791-802.
17. K.K. Kabanemi, J.F. Hetu and A. Garcia-Rejon, "3-D Coupled Solution for the Flow and Fiber Orientation in Injection Molding of Fiber-Filled Systems," Proceedings of the 1996 ASME International Mechanical Engineering Congress and Exposition, Atlanta, GA, USA, Nov. 17-22, 1996, pp. 207-227.
18. G.F. Wilson, D.J. Keller and Y. Eckstein, "Effcets of Molding Parameters on the Properties of Short Glass Fiber Reinforced TPU’S," Automotive Challenge and Plastics Response: Automotive Plastics, RETEC’87, Dearborn, MI, USA, 1987, pp. 130-135.
19. P.F. Bright and M.W. Darlington, "Factors Influencing Fibre Orientation and Mechanical Properties in Fibre Reinforced Thermoplastics Injection Mouldings," Computers & Chemical Engineering International Conference- Practical Rheology in Polymer Process, Loughborough, England, Mar. 26-27 1980, pp. 1-14.
20. S. F. Xavier, D. Tyagi and A. Misra, "Influence of Injection-Molding Parameters on the Morphology and Mechanical Properties of Glass Fiber-Reinforced Polypropylene Composites," Polymer Composites, Vol. 3, No. 2, 1982, pp. 88-96.
21. S.E. Barbosa and J.M. Kenny, "Analysis of the Relationship Between Processing Conditions- Fiber Orientation- Final Properties in Short Fiber Reinforced Polypropylene," Journal of Reinforced Plastics and Composites, Vol. 18, No. 5, 1999, pp. 413-420.
22. U. Delpy and G. Fischer, "Effect of Mold-Filling Conditions on Fiber Distribution in Injection-Molded Disks and on the Mechanical Properties of Such Disks," Advances in Polymer Technology, Vol. 5, No. 1, 1985, pp. 19-26.
23. M. Gupta, N. Santhanam, H.H. Chiang, K. Himasekhar, P. Tushak and K.K. Wang, "Prediction of Fiber Orientation and Mechanical Properties in Short-Fiber Reinforced Injection-Molded Composites," The 3rd International Conference on Computer Aided Design in Composite Material Technology, Newark, DE, USA, 1992, pp. 371-382.
24. M. Damle, S. Mehta, R. Malloy and S.P. McCarthy, "Effect of Fiber Orientation on the Mechanical Properties of Injection Molded Part and a Stereolithography- Insert Molded Part," Proceedings of the 56th Annual Technical Conference, Part 1 (of 3), Atlanta, GA, USA, Apr. 26-30 1998, pp. 584-588.
25. A. Gennaro, "Glass Reinforced Polyamide Injection Moulded: Fibre Orientation Effects on Properties," Plastics and Rubber Processing and Applications, Vol. 9, No. 4, 1988, pp. 241-250.
26. F. Lumini and A. Pavan, "Short Fibre Composite Materials: Relationship Between Fibre Orientation and Fracture Toughness," Plastics, Rubber and Composites Processing and Applications, Vol. 27, No. 5, 1998, pp. 240-246.
27. N.M. Neves, G. Isdell, A.S. Pouzada and P.C. Powell, "On the Effect of the Fiber Orientation on the Flexural Stiffness of Injection Molded Short Fiber Reinforced Polycarbonate Plates," Polymer Composites, Vol. 19, No. 5, 1998, pp. 640-651.
28. A. Siegmann, A. Buchman and S. Kenig, "Residual Stress in Polymers III: The Influence of Injection-Molding Processes Conditions," Polymer Engineering and Science, Vol. 22, 1982, pp. 560-568.
29. W.E. III Haskell, S.P. Petrie and R. W. Lewis, "Fracture Toughness of a Short-Fiber Reinforced Thermoplastic," Polymer Engineering and Science, Vol. 23, 1983, pp. 771-775.
30. K.C. Ho and M.C. Jeng, "Fibre Orientation of Short Glass Fibre Reinforced Polycarbonate Composites under Various Injection Moulding Conditions," Plastics, Rubber and Composites Processing and Applications, Vol. 25, No. 10, 1996, pp. 469-476.
31. J. Hanchi and N.S.J. Eiss, "Tribological Behavior of Blends of Polyetheretherketone (PEEK) and Polyetherimide (PEI) at Elevated Temperature," STLE Tribology Transactions, Vol. 37, No. 3, 1994, pp. 494-504.
32. J. Hanchi and N.S.J. Eiss, "Tribological Behavior of Polyetheretherketone, a Thermotropic Liquid Crystalline Polymer and in Situ Composites Based on Their Blends under Dry Sliding Conditions at Elevated Temperatures," Wear, Vol. 200, No. 1-2, 1996, pp. 105-121.
33. C. Lhymn, K.E. Tempelmeyer and P.K. Davis, "Abrasive Wear of Short Fiber Composites," Composites, Vol. 16, No. 2, 1985, pp. 127-136.
34. K.C. Ho and M.C. Jeng, "Tribological Characteristics of Short Glass Fibre Reinforced Polycarbonate Composites," Wear, Vol. 206, 1997, pp. 60-68.
35. J. Denault, T.V. Khanh and B. Foster, "Tensile Properties of Injection Molded Long Fiber Thermoplastic Composites," Polymer Composites, Vol. 10, No. 5, 1989, pp. 313-321.
36. T.V. Khanh and J. Denault, "Fracture Behavior of Long Fiber Reinforced Thermoplastics," Journal of Materials Science, Vol. 29, No. 21, 1994, pp. 5732-5738.
37. H. Voss and J.K. Kocsis, "Fatigue Crack Propagation in Glass-Fibre and Glass-Sphere Filled PBT Composites," International Journal of Fatigue, Vol. 10, No. 1, 1988, pp. 3-11.
38. C. Lhymn, "Tribological Properties of Poly(Butylene Terephthalate)- Glass Composites: Adhesive Wear," Materials Science and Engineering, Vol. 80, No. 1, 1986, pp. 93-100.
39. G. Taguchi and S. Konishi, "Taguchi Methods: Orthogonal Arrays and Linear Graphs; Tools for Quality Engineering," American Supplier Institute Inc., Dearborn, Michigan, 1987.
40. M.S. Phadke, "Quality Engineering Using Robust Design," Prentice-Hall, Inc., Englewood Cliffs, New Jersey, 1989.
41. Y. Wu and W.H. Moore, "Quality Engineering: Product & Process Design Optimization," American Supplier Institute Inc., Dearborn, Michigan, 1986.
42. N. Logothetis and A. Haigh, "The Statistical Flexibility of the Taguchi Method in the Optimization of Multi-Response Processes," Professional Statistician, Vol. 6, No. 7, 1987, pp. 10-16.
43. N. Logothetis and A. Haigh, "Characterizing and Optimizing Multi-Response Processes by the Taguchi Method," Quality and Reliability Engineering International, Vol. 4, No. 2, 1988, pp. 159-169.
44. A.C. Shoemaker and R.N. Kackar, "A Methodology for Planning Experiments in Robust Product and Process Design," Quality and Reliability Engineering International, Vol. 4, No. 2, 1988, pp. 95-103.
45. M.S. Phadke and K. Dehnad, "Optimization of Product and Process Design for Quality and Cost," Quality and Reliability Engineering International, Vol. 4, No. 2, 1988, pp. 105-112.
46. J.L. Deng, "Introduction to Grey System Theory," The Journal of Grey System, Vol.1, No.1, 1989, pp. 1-24.
47. H.H. Kuo and J.H. Wu, "A Study on the Data Preprocessing in Grey Relational Analysis," The Journal of the Chinese Grey System Association, Vol. 1, No. 1, 1998, pp. 47-53.
48. J.H. Wu and C.B. Chen, "An Alternative Form for Grey Relational Grades," The Journal of Grey System, Vol. 11, 1999, pp. 7-12.
49. S.H. Chang, "Frequency Synthesizer Product or/and Process Optimization Using the Gray Relational Analysis," The Journal of Gray System, Vol. 8, No. 3, 1996, pp. 235-260.
50. C.L. Lin, C.H. Su, J.C. Lin and J.L. Lin, "Optimization of the Machining Process Based on the Orthogonal Array with Grey Relational Analysis," 2000 Conference on Grey System Theory and Application, Ming-Chuan University, Taipei, R.O.C., Nov. 4, 2000, pp. 63-66. (in Chinese)
51. R.F. Gibson, "Principles of Composite Material Mechanics," McGrawHill International Editions, 1994, pp. 156-189.
52. M.R. Piggott, "Short Fiber Polymer Composites : A Fracture-Based Theory of Fiber Reinforcement," Journal of Composite Materials, Vol. 28, pp. 588-604.
53. N.P. Suh and H.C. Sin, "The Genesis of Friction," Wear, Vol.69, 1981, pp. 91-114.
54. W. Hirst and J.K. Lancaster, "Surface Film Formation and Metallic Wear," Journal of Applied Physics, Vol. 27, 1956, pp. 1057-1065.
55. F.P. Bowden, A.J.W. Moore and D. Tabor, "The Ploughing and Adhesion of Sliding Metals," Journal of Applied Physics, Vol. 14, 1943, pp. 80-91.
56. K.G. Budinski, "Hardfacing III : The Wear Process," Welding Design and Fabrication, 1986, pp. 40-47.
57. J.L. Deng, "A Course on Grey System Theory," Huazhong University of Science and Technology Press, Wuhan, 1990.
58. J.L. Deng, "The Essential Methods of Grey Systems," Huazhong University of Science and Technology Press, Wuhan, 1992.
59. "Standard Test Method for Tensile Properties of Plastics, " Annual Book of ASTM Standards, D638-91, pp. 161-178. |