參考文獻 |
1. F. F. Ehrich, “Subharmonic Vibrations of Rotors in Bearing Clearences”ASME Paper 66-MD-1,Design Engineering Conference, May 9-12,1966.
2. F. F. Ehrich, “High Order Subharmonic Response of High Speed Rotors in Bearing Clearence”, ASME Journal of vibration, Acoustic, Stress, and Reliability in Design, Vol. 110, No. 1, January 1988, pp. 9-16.
3. W. M. Ostachouicz and M. Krawczuk, “Analysis of the Effect of Cracks on the Natural Frequencies of a Cantilever Beam”, Journal of Sound and Vibration, Vol. 150, 1991, pp. 191-201.
4. C. A. Papadopoulos and A. D. Dimarogonas, “Coupled Vibration of a Cracked Shafts”, ASME, Journal of Vibration and Acoustics, Vol. 114, 1992, pp. 461-467.
5. D. T. Nguyen, S. T. Noah and C. F. Kettleborough, “Impact Behavior of an Oscillator with Liminting Stops, Part II: Dimensionless Design Parameters”, Journal of Sound and Vibration, 109(2), 1986, pp. 309-325.
6. Y. S. Choi, S. T. Noah, “Nonlinear Steady-state Response of a Rotor-supported System”, ASME Journal of Vibration, Stress, and Reliability in Design, Vol. 109, No.3, 1987, pp. 255-261.
7. F. K. Choy and J. Padovan, “Nonlinear Transient Analysis of Rotor-Casing Rub Events”, Journal of Sound and Vibration, Vol. 113, No. 3,1987, pp.529-545.
8. A. Muszynska, “Rotor-To-Stationary Element Rub-Related Vibration Phenomena in Rotating Machinery”, Literature Survey, The Shock and Vibration Digest, Vol. 21, No. 3, 1989, pp. 3-11.
9. G. J. Yue, “Vibration Feature Analysis of Rubbing Rotors”, Proceedings of the 1st International Machinery Monitoring and Diagnostics Conference and Exhibit, Las Vegas, Nevada, 1989, pp.599-603.
10. P. Goldman, A. Muszynska, “Chaotic Behavior of Rotor/Stator Systems With Rubs”, ASME Journal of Engineering for Gas Turbines and Power, Vol, 116, July, 1994, pp.692-701.
11. D. H. Gonsalves, R. D. Neilson and A. D. S. Barr, “A Study of the Response of a Discontinuously Nonlinear Rotor System”, Nonlinear Dynamics, 7, 1995, pp. 451-470.
12. F. Chu and Z. Zhang, “Bifurcation and Chaos in a Rub-Impact Jeffcott Rotor System”, Journal of Sound and Vibration, 210(1), 1988, pp. 1-18.
13. B. O. Al-Bedoor, “Transient Torsional and Lateral Vibrations of Unbalanced Rotors with Rotor-To-Stator Rubbing”, Journal of Sound and Vibration, 229(3), 2000, pp. 627-645.
14. H. Diken, “Non-Linear Vibration Analysis and Subharmonic Whirl Frequencies of the Jeffcott Rotor Model”, Journal of Sound and Vibration, 243(1), 2001, pp. 117-125.
15. F.Chu and W.Lu,2001,“Determination of the Rubbin Location in a Multi-disk Rotor System by Means of Dynamic Stiffness Identification”,Journal of Sound and Vibration,Vol.248,pp.235-246.
16. Klaus-Jurgen Bathe, “Numerical Methods in Finite Element Analysis”, Englewood Cliffs, N. J. ,1976.
17. Robert G. Loewy and Vincent J. Piarulli, “Dynamic of Rotating Shafts”, N.Y,1969. |