參考文獻 |
1.J.R.Davis, Aluminum and aluminum alloys, ASM Specialty Handbook, Ohio, ASM, 1994.
2.J.E.Hatch, Aluminum: Properties and physical metallurgical, Ohio, ASE, pp. 320-350, 1984.
3.K.G.Wikle, Improving aluminum casting with beryllium, AFS Trans., pp. 513-518, 1978.
4.Y.H.Tan, S.L.Lee and Y.L.Lin, Effects of Be and Fe additions on the microstructure and mechanical properties of A357.0 alloys, Metallu- rgical and Materials Transactions A vol. 26A, pp. 1195-1205, 1995.
5.Thmoas, J.Inst.Met, 90(1961-63)57.
6.Lutts, Acta Met., vol. 9, pp57-69, 1961.
7.K.Matsuda, S.Tada, S.Ikeno, T.Sato and A.Kamio, Crystal system of rod-shaped precipitates in an Al-1.0mass%Mg2Si-0.4mass%Si alloy, Scripta Metallurgical et Materialia, vol.32 , pp. 1175-1180, 1995.
8.D.A.Dranger, R.R.Sawtell and M.M.Kersker, Effects of beryllium on the properties of A357.0 castings, AFS Transactions, vol. 15, pp. 579-586, 1984.
9.O.Vorren, J.E.Evensen and T.B. Pedersen, Microstructure and mechanical properties of AlSi(Mg) casting alloys, AFS Trans., vol. 92, pp. 459-466, 1984.
10.L.A.Bendersky, A.J.Mcalister and F.S. Biancaniello, Phase transformation during annealing of rapid solidified Al-rich Al-Fe-Si alloys, Metall. Trans. A, vol. 19A, pp. 2893-2900, 1988.
11.P.Skjerpe, Intermetallic phase formed during DC-casting of an Al-0.25wt pct Fe-0.13wt pct Si alloy, Metall. Trans. A, vol. 18A, pp. 189-200, 1987.
12.A.M.Zakharov, I.T.Gul’din, A.A.Arnol’d and Yu.A.Matsenko, Phase diagram of the Al-Si-Fe system within the concentration range of 10-14%Si and 0-3%Fe, Russ. Metall., vol. 3, pp. 177-180, 1988.
13.T.D.Burleigh, The postulated mechanisms for stress corrosion cracking of aluminum alloys, Corrosion, vol. 47, pp. 89-98, 1991.
14.P.K.Poulose, J.E. Morral and A.J.Mcevily, Stress corrosion crack velocity and grain boundary precipitates in Al-Zn-Mg alloy, Metall. Trans., vol. 5, pp. 1393-1400, 1974.
15.M.O.Speidel, Stress corrosion cracking of aluminum alloys, Metall. Trans. A, vol. 6A, pp. 631-651, 1975.
16.L.Christodoulou and H.M. Flower, Hydrogen embrittlement and trapping in Al-6%Zn-3%Mg, Acta Metall., vol. 28, pp. 481-487, 1980.
17.D.Apelian, S.Shivkumar and G.Sigworth, Foundmental aspects of heat treatment of cast Al-Si-Mg alloys, AFS Trans., pp. 727-742, 1989.
18.B.Closset, R.A.L.Drew and J.E.Gruzleski, Eutectic silicon shape control by situ measurement of resistivity, AFS Trans., pp. 9-16, 1986.
19.C.W.Meyers, Solution heat treatment effects on ultimate tensile strength and uniform elongation in A357 Aluminum alloys, AFS Trans., pp. 511-518, 1986.
20.M.H.Mulazimoglu, R.A.L.Drew and J.E.Druzleski, The effects of strontium on the electrical resistivity and conductivity of aluminum-silicon alloys, Metall. Trans. 18A, pp. 941-947, 1981.
21.S.Shivkumar, C.Keller and D.Apelian, Aging behavior in Al-Si-Mg alloys, AFS Trans., pp905-911, 1990.
22.S.Shivkumar, S.Ricci, Jr. and D.Apelian, Influence of Solution Parameters and Simplified Supersaturation Treatments on Tensile Properties of A356 Alloy, AFS Trans., vol. 18, pp. 913-922, 1990.
23.L.F.Mondolfo, Aluminum Alloys: Structure and Properties, London, Butterwordths and Co., Ltd., p. 534, 1976.
24.A.Couture, Iron in aluminum casting alloys-a literature survey, AFS Int. Cast Metals J.,pp. 9-17, 1981.
25.G.Gustafsson, T.Thorvaldsson and G.L.Dunlop, The influence of Fe and Cr on the microstructure of casting alloys, Metall. Trans. 17A, pp. 45-52, 1986.
26.L.F.Mondolfo, Aluminum Alloys: Structure and Properties, London, Butterwordths and Co., Ltd., p. 760, 1976.
27.Blanc.C. and Mankowski, G. Corros. Sci.,39 ,p. 949, 1997.
28.Ch.Blanc., Y.Roques and G.Mankowski, Application of phase interformetric microscopy to studies of the bshavior of coarse intermetallic particles in 6056 aluminum alloy, Corrosion Sci., vol. 40, No. 6, pp. 1019-1035, 1998.
29.E.Brillas, P.L.Cabot, F.Centellas, J.A.Garrido, E.Perez and R.M.Rodriguez, Electrochemical oxidation of high-purity and homogeneous Al-Mg alloys with low Mg content.
30.應力腐蝕機理, 喬利杰, 王燕斌及褚武揚著, 科學出版社, 北京, 35-67頁, 1993.
31.M.O.Speidel, Current understanding of stress corrosion crack growth in aluminum alloys,The theory of stress corrosion cracking in alloys, Ed. By Dr.J.C. Scully, NATO, Brussels, p. 333, 1971.
32.E.H.Hollingsworth and H.Y.Hunsicker, Metals Handbook, vol. 13, Corrosion, 9th ed., ASM International, Metals Park, OH, p. 590, 1987.
33.Denny A. Jones.,Principal and prevention of corrosion, 2nd ed., pp. 337-338, 1996.
34.A.J.Sedriks, J.A.S. Green and D.L.Novak, On the chemistry of the solution at tips of stress corrosion cracks in Al alloys, Corrosion-NACE, vol. 27, pp. 198-202.
35.J.K.Park and A.J.Ardell, Effect of retrogression and reaging treatments on the microstructure of Al-7075-T651, Metall. Trans. A,vol. 15A, pp. 1531-1543, 1984.
36.R.K.Viswanadham, T.S.Sun and J.A.S. Dreen, Grain boundary segregation in Al-Zn-Mg alloys-implications to stress corrotion cracking, Metall. Trans., vol. 11A, pp. 85-89,1980.
37.G.M.Scamans, N.J.H. Holroyd and C.D.S. Tuck, The role of magnesium segregation in the untergrainular stress corrosion cracking of aluminum alloys, Corrosion Sci., vol. 27, pp. 329-347, 1987.
38.F.E.Watkinson and J.C.Scully, The stress corrosion cracking of a high purity Al-6Zn-3Mg alloy, Corrosion Sci., vol. 12, pp. 905-924, 1972.
39.S.L.Pyun, T.S.Suh and H.P.Kim, Microstructural dependence of stress corrosion cracking behavior in commercial Al-Zn-Mg-Cu alloy(AA7075), Werkst. and Korros., vol. 38, pp. 129-134, 1987.
40.T.C.Tsai and T.H.Chuang, Atmospheric stress corrosion cracking of a superplastic 7475 aluminum alloy, Metall. Trans., in Press, 1996.
41.P.Doig and J.W.Edington, Influence of precipitates free zones on the stress corrosion susceptibility of a Al-5.9%Zn-3.2%Mg alloy, Corrosion-NACE, vol. 31, pp. 347-352, 1975.
42.M.H.Mulazimoglu, R.A.L.Drew and J.E.Druzleski, Electrical conductivity of aluminum-rich Al-Si-Mg alloys, J. Mat. Sci. letter8, 8, pp. 297-300,1989.
43.Y.H.Tan and S.L.Lee, Correlation between microstructure and mechanical properties of A357 aluminum alloys containing beryllium and iron, chaper 5, pp.1, 1995.
44.W.Stephen Tait, Ph.D., An introduction to electrochemical corrosion testing for practicing engineers and scientists, pp. 38-40, 1994.
45.Denny A. Jones.,Principal and prevention of corrosion, 2nd ed., pp. 88, 1996.
46.Denny A. Jones.,Principal and prevention of corrosion, 2nd ed., pp. 266-268, 1996.
47.D.O.Sprowls, Metalls Handbook, vol. 13, Corrosion, 9th ed., ASM International, Metals Park, OH, p. 263, 1987.
48.Denny A. Jones.,Principal and prevention of corrosion, 2nd ed., pp. 524, 1996. |