參考文獻 |
1. 楊穆仁,“粉末射出成形技術的近況與展望“ ,粉末冶金會刊, ,vol. 22, no.2, pp. 83~87 (1997).
2. 陳文信, 金屬粉末射出成形技術, 機械工業雜誌, Vol. 154, pp. 148-158 (1996).
3. R. M. German, “Wear Application Offer Further Growth for PIM’ ,Metal Powder Report, June,pp.24~28 (1999).
4. B. Haworth and P. J. James, “Injection Moulding of Powders”, Metal Powder Report, pp. 146-149 (1986).
5. R. M. German, K. F. Hens, “Key Issue in Powder Injection Molding”, Ceramic Bulletin, Vol. 70, No. 8, pp. 1294-1302 (1991).
6. K. F. Hens, T. J. Roche, J. A. Grohowski, “Thermat Sets up for Precision PIM”, Metal Powder Report, pp. 24~28 (1996).
7. Karl. F. Hens, “Thermat Expands Precision PIM Operation”, Metal Powder Report, pp. 18~22 (1998).
8. A. D. Hanson and S. C. Perruzza, “Optimizing Component Designs for Metal Injection Molding”, Int. J. Powder Metall., Vol.36, No.3, pp. 37-42 (2000).
9. B. K. Lograsso, A. Bose, B. J. Carpenter, C. I. Chung, K. F. Hens, D. Lee, S. T. Lin, C. X. Liu, R. M. German, R. M. Messler, P. F. Murley, B. O. Rhee, C. M. Sierra, and J. Warren, “Injection of Carbonyl Iron with Polyethylene Wax”, Int. J. Powder Metall., Vol. 25, No. 4, pp. 337-348 (1989).
10. K. C. Hsu and G. M. Lo, “Effect of Binder Composition on Rheology of Iron Powder Injection Moulding Feedstocks : Experimental Design”, Powder Metall., Vol. 39, No. 4, pp. 286-290 (1996).
11. K. F. Hens, S. T. Lin, R. M. German and D. Lee, “The Effects of Binder on the Mechanical Properties of Carbonyl Iron Products”, JOM, pp. 17-21 (1989).
12. Y. S. Zu, S. T. Lin, “Optimizing the Mechanical Properties of Injection Molded W-4.9%Ni-2.1%Fe in Debinding”, J. Mater. Process. Tech., Vol. 71, pp. 337-342 (1997).
13. 楊偉文, 楊開雲, 洪敏雄, 金屬射出成形用水溶性黏結劑之研究,粉末冶金會刊, 第24卷, 第1期, pp. 24-29 (1999).
14. C. W. Finn, “Vacuum Binder Removal and Collection”, Int. J. Powder Metall., Vol. 27, No. 2, pp.127-132 (1991).
15. R. M. German, “Theory of Thermal Debinding”, Int. J. Powder Metall., Vol. 23, No. 4, pp. 237-245 (1987).
16. B. K. Lograsso, R. M. German, “Thermal Debinding of Injection Molded Powder Compacts”, pmi, Vol. 22, No. 1, pp. 17-22 (1990).
17. B. R. Patterson and C. S. Aria, “Debinding Injection Molded Materials by Melt Wicking”, JOM, pp. 22-24 (1989).
18. C. S. Aria, B.R. Petterson, “Influence of Process Variables on Debinding by Melt Wicking“, Modern Development in Powder Metallurgy, vol. 18, pp. 403-416 (1988).
19. R. Vetter, M. J. Sanders, I. Majewska-Glabus, L. Z. Zhuang and J. Duszczyk, “Wick-Debinding in Powder Injection Molding”, Int. J. Powder Metall., Vol. 30, No. 1, pp. 115-124 (1994).
20. R. Vetter, W. R. Horninge, P. J. Vervoort, I. Majewska-Glabus, L. Z. Zhuang, J. Duszczyk, “Squared Root Wick Debinding Model for Powder Injection Moulding”, Powder Metall., Vol. 37, No. 4, pp. 265-271 (1994).
21. 柳立明, 金屬射出成形中毛細吸附脫脂製程參數之最佳化分析, 中央大學機械工程研究所碩士論文 (1999).
22. M. Dutilly, O. Ghouati, and J. C. Gelin, “Finite-Element Analysis of the Debinding and Desification Phenomena in the Process of Metal Injection Molding”, J. Mater. Process. Tech., Vol. 83, pp. 170-175 (1998).
23. C.C. Chen, L. W. Hourng, “Numerical Simulation of Two Dimensional Wick Debinding in MIM” ,Powder Metallurgy, Vol. 42, No.4, pp.313~319 (1999).
24. 鄭育宗, 金屬射出成形二維毛細脫脂機制之數值模擬, 中央大學機械工程研究所碩士論文 (1999).
25. 吳瑋芳, 利用視流法分析金屬射出成形脫脂製程中滲透度與毛細壓力之關係, 中央大學機械工程研究所碩士論文 (2000).
26. 陳釧鋒, 利用網絡模型數值模擬粉末射出成形製程毛細吸附脫脂機制, 中央大學機械工程研究所碩士論文 (2000).
27. 陳志誠, 金屬粉末射出成形製程中胚體毛細吸附脫脂之數值模擬與實驗, 中央大學機械工程研究所博士論文 (2001).
28. 鄭嘉雄, 飽和度對金屬射出成形製程中毛細吸附脫脂之影響, 中央大學機械工程研究所碩士論文 (2001).
29. J. Bear, Dynamics of fluids in porous media, Dover Pub., New York, (1972).
30. Carlos A. Grattoni, Richard A. Dawe, ”Anisotropy in Pore Structure of Porous Media”, Powder Technology, Vol. 85, pp. 143-151 (1995).
31. Y. Oyama, K. Yamaguchi, ”The Distribution of Liquid Content Equilibrium of Powder Bed” ,Rep. Inst. Phys. Chem. Res., Vol. 38, pp. 392-400 (1962).
32. J. F. Thompson, Z. U. A. Warsi, and C. W. Mastin, “Numerical Grid Generation Foundations and Applications”, North-Holland Pub. , New York, (1985).
33. 黃進光, “三維橢圓座標之流場格點分析”, 國立中央大學機械研究所碩士論文(1987).
34. Thomas P. D., and Middlecoff J. F., “Direct control of the grid point distribution in meshes generated by elliptic equation”, AIAA J., Vol.18, No.6, pp.652-656 (1980).
35. J. F. Thompson, F. C. Thames and C. W. Mastin, “TOMCATA code for Numerical Generation of Boundary Fitted Curvilinear Coordinate System on Field Containing Any Number of Arbitrary 2-D Bodies”, Journal of Computational Physics, Vol. 24, pp. 274-302 (1977).
36. M. Visbal and D. Knight, “Generation of Orthogonal and Nearly Orthogonal Coordinates with Grid Control Near Boundaries”, AIAA Journal, Vol. 20, No. 3, pp. 306-325 (1982).
37. L. W. Hourng and C. K. Hwang, “Computational Among Grid Generation Using Elliptic Partial Differential Equations”, Journal of the Chinese Society of Mechanical Engineers, Vol. 10, No. 5, pp. 383-392 (1988).
38. 張智淵, “金屬粉末射出成型中胚體毛細吸附脫脂製程之數值模擬”, 機械工程研討會, (2001). |