參考文獻 |
[1]Richard Gale, “Principles and applications of the digital micromirror device in projection displays”, Lasers and Electro-Optics Society 1999 12th Annual Meeting. LEOS ’99. IEEE, Vol. 1, pp.212-213, 1999.
[2]R.J.T. Bunyan, D.O. King, R.A. Wilson, and A.M. Scott, “Design, modeling and evaluation of micromirrors”, Microengineering, Modelling and Design (Ref. No. 1999/052), IEE Seminar on, pp.3/1-3/3, 1999.
[3]Jinghong Chen and Sung-Mo(Steve) Kang, “Dynamic Macromodeling of MEMS Mirror Device”, pp.925-928, IEDM 2001.
[4]Johannes Buhler, Jorg Funk, Jan G. Korvink, Franz-Peter Steiner, Pasqualina M. Sarro, and Henry Baltes, “Electrostatic Aluminum Micromirrors Using Double-Pass Metallization”, Journal of Microelectromechanical System, Vol. 6, No. 2, pp.126-135, June 1997.
[5]M.R. Douglass, “Lifetime estimates and unique failure mechanisms of the Digital Micromirror Device (DMD)”, Reliability Physics Symposium Proceedings, 1998, 36th Annual . 1998, IEEE International, pp.9-16, 31 March-2 April 1998.
[6]Andrew B. Sontheimer, “Digital Micromirror Device (DMD) hinge memory lifetime reliability modeling”, Reliability Physics Symposium Proceedings, 2002, 40th Annual, IEEE International, pp.118-121, 2002.
[7]Sang-Ho Lee, Myong-John Kwon, Jin-Goo Park, Yong-Kweon Kim, and Hyung-Jae Shin, “The Vapor Phase Deposition of Fluorocarbon Films for the Prevention of in-use Stiction in Micromirrors”, International Microprocesses and Nanotechnology Conference (MNC) , pp.172-173, 13-16 July 1998.
[8]J. M. Younse, “Mirrors on a chip”, IEEE Spectrum, pp.27-31, 1993.
[9]S. Kurth, R. Hahn, C. Kanfmann, K/ Kehr, J. Mehner, V. Wollmann, W. Dotzel, T. Gessner, “Silicon mirrors and micromirror arrays for spatial laser beam modulation”, Sensors and Actuators A, Vol. 66, pp.76-82, 1998.
[10]H. Toshiyoshi, H. Fujita, “Electrostatic microtorsion mirrors for an optical switch matrix”, Journal of Microelectromechanical System, Vol. 5, No. 4, pp.231-237, 1996.
[11]S. Kurth and W. Dotzel, “Experimental adaption of model parameters for Microelectromechanical systems (MEMS)”, Sensors and Actuators A, Vol. 62, pp.760-764, 1997.
[12]Seok-Whan Chung, Jong-Woo Shin, Yong-Kweon Kim, and Bong-Soo Han, “Design and fabrication of micromirror supported by electroplated nickel posts”, Sensors and Actuators A, Vol. 54, pp.464-467, 1996.
[13]陳勇志, “Study on the Etching Characteristics of Nitrogen-Doped Cobalt Silicide film”, 國立中興大學九十一學年度碩士論文.
[14]蕭鉉樺, “Effect of Nitrogen Doping on the Properties of Cobalt Silicide film”, 國立中興大學九十一學年度碩士論文.
[15]莊達人, VLSI製造技術 ; 高立出版社, p219.
[16]Marc Madou, “Fundamentals of Microfabrication”, CRC Press LLC, USA, 1997.
[17]Yee, Y., Chun, K., Lee, J. D., and Kim, C.-J., “Polysilicon surface modification technique to reduce sticking of microstruturers”, Sens. Actuators, Vol. A52, nos. 1-3, pp.145-150, Apr. 1996.
[18]Chang-Jin Kim, John Y. Kim, Balaji Sridharan, “Comparative evaluation of drying techniques for surface micromachining”, Sensor and Actuators A, 64, pp.17-26, 1998.
[19]Takeshima, N., Gabriel, K. J., Ozaki, M., Takahashi, J., Horiguchi, H., and Fujita, H., “Electrostatic Parallelogram Actuators”, Proceedings of Transducers '91, the 1991 International Conference on Solid-State Sensors and Actuators, IEEE Press, San Francisco, CA, pp.188-191, June 24-27, 1991.
[20]Mulhern, G. T., Soane, D. S and Howe, R. T., “Supercritical Carbon Dioxide Drying of Microstructure”, Processing of Transducers '93, the 7th International Conference on Solid-State Sensors and Actuators, Yokohama, Institute of Electrical Engineers, Japan, pp.296-299, June 7-10, 1993. |