寬頻光方向耦合器使用數種權重函數之結構最佳化設計

以作者查詢圖書館館藏

、以作者查詢臺灣博碩士

、以作者查詢全國書目

、勘誤回報

、線上人數：21

、訪客IP：18.188.113.185

姓名

古昀生(Yun-Sheng Ku) 查詢紙本館藏

畢業系所

機械工程學系

論文名稱

寬頻光方向耦合器使用數種權重函數之結構最佳化設計
(Optimal design of waveguide structure for broadband optical directional coupler with various weighting functions)

相關論文

★ 輝度與色彩均勻化之發光二極體直下式背光模組應用設計	★ 薄型化LCD直下式背光模組設計
★ 非對稱型光分佈的發光二極體照明裝置之研究	★ 應用平行光互連技術於40Gb/s的光收發次模組之封裝技術
★ 大尺寸發光二極體側光式背光模組散熱技術	★ 灰化製程對鉻及氧化銦錫接觸阻抗之影響
★ 導光式發光框條的光學設計與驗證	★ 直下式LED液晶觸控顯示器之研究
★ 全周光裝飾型LED燈泡之研究	★ 卷對卷技術應用於凹形微透鏡膜製造之分析
★ 複合式多波長驗鈔裝置探討	★ 液晶顯示器品質提升之研究
★ 在微影製程中旋轉塗佈實驗之正型光阻減量的研究	★ 一種應用於特定工程圖表影像的文字智慧辨識與提取之技術研究
★ 線上近紅外線穿透光檢測系統應用於不織布製程設備之研究	★ 遠端螢光粉LED光學效能提升之研究

檔案

[Endnote RIS 格式]

[Bibtex 格式]

[相關文章]

[文章引用]

[完整記錄]

[館藏目錄]

至系統瀏覽論文 ( 永不開放)

摘要(中)

波長多工光通訊系統發中，設備的要求需寬頻與低串擾的元件來處理所有的信號。在光方向耦合器當中有一種絕熱式光方向耦合器是一個適當的選擇，其元件具有對光極化，光波長及元件長度不敏感的特性，其功能是控制功率，類似傳統光學的元分光器，因此絕熱式光方向耦合器是使用相當廣泛的元件。本研究提出了一修正型函數，並定義數個變數，利用串擾以及頻寬的模擬與計算優化所設計的耦合器。最後得知耦合器的結構參數、耦合器長度與加工裕度是需要被考慮的在絕熱式光方向耦合器的設計上，在五個不同的函數中每個所獲得的效益都是不一樣的，必須有各自的優化條件與使用處不同的先決條件。

摘要(英)

Under WDM system, we often need a broadband device addressing all the signals. One of the candidates is the adiabatic coupler which exhibits advantages of insensitive to polarizations, wavelengths and length of the device. The objective of the work includes two parts: the fist part defines theory ranges and processing tolerance of mismatched optical coupler (MOC). The second part is optimization waveguide structure of MOC for low the crosstalk, broadband (broad bandwidth and C+L-band) and short couplers, respectively. The results prove clearly of coupling structure that short coupler length with process tolerance is need considered in the MOC.

關鍵字(中)

★ 光方向耦合器
★ 權重函數

關鍵字(英)

★ optical directional coupler
★ weighting function

論文目次

Table of Contents
Abstract in Chinese I
Abstract in English II
Table of Content III
List of Tables V
List of Figures VIII
Chapter 1. Introduction 1
1.1 Preface and overview 1
1.2 Research Motivation 4
1.3 Content Summary 5
Chapter 2. Theoretical model and Schematics diagram of MOC 8
2.1 Theoretical model 8
2.2 Schematics diagram of MOC 13
Chapter 3. SSF, RCF, HWF, and M-HWF for broad bandwidth 15
3.1 SSF VS. RCF 15
3.1.1 Theoretical calculations 15
3.1.2 BPM simulations for crosstalk and coupler length 16
3.1.3 BPM simulations for structure tolerance and bandwidth 17
3.1.4 Conclusions 18
3.2 HWF Vs. M-HWF 31
3.2.1 Theoretical calculations 31
3.2.2BPM simulation results and discussions 32
3.2.3Conclusion 34
Chapter 4. BWF, HWF, and M-HWF for C+L-ban 45
4.1 BWF 45
4.1.1 Theoretical calculations 45
4.1.2 BPM simulation results and discussions 46
4.1.3 Conclusion 50
4.2 HWF VS. M-HWF 56
4.2.1 Theoretical calculations 56
4.2.2 Results and discussion 57
4.2.3 Conclusion 60
Chapter 5. Conclusions 67
References 68
Appendix A 70

參考文獻

[1] J. S. Cook, “Tapered velocity couplers,” Bell Syst. Tech. J., pp. 807-822, 1955.
[2] A. G. Fox, “Wave coupling by warped normal modes,” Bell Syst. Tech. J., pp. 823-852, 1955.
[3] W. H. Louisell, “Analysis of the single tapered mode coupler,” Bell. Syst. Tech. J., pp. 853-870, 1955.
[4] M. G. F. Wilson and G. A. Teh, “Improved tolerance in optical directional couplers,” Electron. Lett., vol. 9, pp. 453-455, 1973.
[5] R. B. Smith, “Coupling Efficiency of the tapered coupler,” Electron. Lett., vol.11, pp. 204-206, 1975.
[6] R. B. Smith, “Analytical solutions for linearly tapered directional couplers,” J. Opt. Soc. Amer., vol. 66, pp. 882-892, 1976.
[7] M. Matsuhara and K. O. Hill, and A. Watanabe, “Optical-waveguide filters: Synthesis, “ J. Opt. Soc. Amer., vol. 65, pp. 804-809, 1975.
[8] G. H. Song and W. J. Tomlinson, “Fourier analysis and synthesis of adiabatic tapers in integrated optics,” J. Opt. Soc. Amer. A., vol. 9, pp. 1289-1300, 1992.
[9] R. C. Alferness and P. S. Cross,” Filter characteristics of codirectionally coupled waveguides with weighted coupling,” IEEE, J. Quantum. Electron., vol.14, pp.843-847, 1978.
[10] R. C. Alferness“optical directional couplers with weighted coupling,”App. Phys. Lett., vol. 35, pp. 260-262, 1979.
[11] A.W. Snyder, Y. Chen, D. Rowland, and D. J. Mitchell, “Mismatched directional couplers,” Opt. Lett., vol.15, pp. 357-359, 1990.
[12] D. R. Rowland, Y. Chen, and A.W. Snyder,” Tapered mismatched couplers,” J. Lightwave Technol., vol. 9, pp. 567-570, 1991.
[13] R. R. A. Sym, “The digital directional coupler: Improved design,” IEEE Photon. Technol. Lett., vol. 4, pp. 1135-1138, 1992.
[14] H. S. Kim and R. V. Ramaswamy, “Tapered, both in dimension and in index, velocity coupler: theory and experiment,” IEEE, J. Quantum Electron., vol. 29, pp. 1158-1167, 1993.
[15] T. A. Ramadan, R. S. Scarmozzino, and R. M. Osgood, ”Adiabatic couplers.:design rules and optimization,” IEEE, J. Lightwave. Technol., vol 16, pp. 277-283, 1998.
[16] A. Syahriar, V. M. Schenider and S. Al-Bader, “The Design of Mode Evolution Couplers,” J. Lightwave Technol., vol 16, pp. 1907-1914, 1998.
[17]D. C. Montgomery, Desing and analysis of experiments, wiley, New York, 1991.
[18] P. S. Cross and H. Kogelnik, “Sidelobe suppression in corrugated-waveguide filters,” Opt. Lett., vol. 1, pp. 43-45, 1977.
[19] H. A. Haus, Waves and Fields in Optoelectronics, Prentice- Hall, 1984.
[20] G. R. Hadley, “Transparent boundary condition for the beam propagation method,” IEEE J. Quantum Electron., vol. 28, pp. 363-370, 1992.
[21] R. Syms and J. Cozens,” Optical guided waves and devices,” Chapter 10, 1992.
[22] Allan W. Snyder and John D. Love,” Optical Waveguide Theory,” Chapter 12-13,18-19,27-29.
[23] Alexander M. Kenis, Ilya Vorobeichik,“Non-Evanescent Adiabatic Directional Coupler,” IEEE, J. Quantum. Electron., vol.37, pp.1321-1328, 2001.
[24] H. Yamada, T. Chu, S. Ishida and Y. Arakawa, “Optical directional coupler based on Si-Wire waveguides,” IEEE Photonics Technol. Lett., vol17, 588-587, 2005.
[25] H. Yamada, T. Chu, S. Ishida and Y. Arakawa, “Si photonic wire waveguide devices ,” IEEE J. Quantum Electron., vol. 12, pp.1371-1379, 2006.

指導教授

陳奇夆(Chi-Feng Chen)

審核日期

2009-1-21

推文