![]() |
|
以作者查詢圖書館館藏 、以作者查詢臺灣博碩士 、以作者查詢全國書目 、勘誤回報 、線上人數:29 、訪客IP:18.226.96.129
姓名 許誌文(Chih-wen Hsu) 查詢紙本館藏 畢業系所 機械工程學系 論文名稱 腿骨二維輪廓點資料之三維網格模型重建
(3D STL Model Reconstruction of Leg 2D Contour Point Data)相關論文 檔案 [Endnote RIS 格式]
[Bibtex 格式]
[相關文章]
[文章引用]
[完整記錄]
[館藏目錄]
[檢視]
[下載]
- 本電子論文使用權限為同意立即開放。
- 已達開放權限電子全文僅授權使用者為學術研究之目的,進行個人非營利性質之檢索、閱讀、列印。
- 請遵守中華民國著作權法之相關規定,切勿任意重製、散佈、改作、轉貼、播送,以免觸法。
摘要(中) 目前CT等序列式醫學斷層影像普遍受各大醫院使用,因此醫學影像處理及二維輪廓點資料之三角網格模型重建有其研究之重要性,以利後續如人工植入物客製化、頭顱修補及牙模重建等應用。本研究目的便是從醫學影像取得之腿骨二維輪廓點資料重建其三角網格模型。首先進行點資料前處理以統一所有二維輪廓之格式,接著判斷各層輪廓組合的相對應關係,藉此對應關係研究其適用之網格連結方法,最後重建各輪廓組合之網格,合併輸出完整的腿骨三角網格模型。在重建結果的驗證上,與現有的影像處理軟體重建同筆腿骨二維輪廓點資料,並比較兩者之重建結果與原始輪廓比較之誤差量及網格品質之差異,以證明本研究所發展之三角網格模型重建方法之可行性。 摘要(英) Computer tomography (CT) has extensively been used as a tool for diseases diagnosis. Traditionally, a series of CT images are displayed sequentially in a screen for visualization. But, the CT images can provide additional information for the use in biomedical engineering. One of the techniques received extensive interest is the construction of the 3D model form 2D CT images. A series of section points corresponding to the hardware tissue to be studies should be obtained from the CT images first. The section points can then be converted into triangular meshes, extensively used in various fields to represent a 3D model. The purpose of this study is to develop a technique to construct triangular meshes from a series of section points. First, a pre-processing of the section points is necessary, including rearranging the points, removal of redundant points and scan line smoothing. Second, the relation between every two neighboring arrays of section points is investigated and the method is proposed to construct triangular meshes. Additional points may be added for some empty regions. Appropriate algorithm is proposed to ensure that the region with points inserted is smooth globally. Finally, the triangular meshes are output as a STL file format, which is a universal data format and can be used in many CAD/CAM systems. The proposed method is primarily used for the reconstruction of leg bone models. Therefore, extensive experiments and simulations are performed to verify the feasibility of the proposed method for the leg model construction. The results of the proposed method are also compared with those from AMIRA (commercial software) to verify the accuracy of the proposed method. 關鍵字(中) ★ 網格模型重建
★ 醫學影像重建
★ 二維輪廓點資料關鍵字(英) ★ 2D contour point data
★ medical image reconstruction
★ STL model reconstruction論文目次 第一章 緒論
1.1 前言
1.2 文獻回顧
1.2.1 影像處理
1.2.1 網格重建
1.3 研究目的與方法
1.3.1 研究目的
1.3.1 研究方法
1.4 論文架構
第二章 醫學影像處理軟體介紹
2.1 前言
2.2 醫學影像軟體Amira之介紹
2.3 Amira之影像處理
2.4 Amira之網格重建
2.5 Amira網格重建範例結果討論
第三章 輪廓點資料前處理
3.1 前言
3.2 前處理之刪除重複點
3.3 前處理之統一排列方向
3.4 前處理之統一起始位置
3.5 前處理之點資料平滑化
第四章 網格重建
4.1 前言
4.2 輪廓組合判斷方法
4.2.1 圈輪廓之分組
4.2.2 分歧輪廓與物件末端輪廓組合判斷
4.3 單圈對單圈輪廓點資料網格重建
4.4 末端輪廓點資料網格補洞
4.4.1 輪廓內外點的判斷
4.4.2 棋盤狀的規則內插點網格連結
4.4.3 補洞
4.5 分歧輪廓點資料網格重建
第五章 CT影像資料轉三維網格模型實例
5.1前言
5.2網格重建與輪廓點資料取得
5.3與Amira重建同筆輪廓點資料之比較
5.3.1 完整股骨頭網格重建比較
5.3.2 股骨頭局部網格重建比較
5.4與人工骨逆向掃描網格之比較
第六章 結論與未來展望
6.1 結論
6.2 未來展望
參考文獻參考文獻 [1] T. Pavlidis and Y. T. Liow, “Integrating Region Growing and Edge Detection”, IEEE Transactions on Pattern, Analysis and Machine Intelligence, Vol. 12, pp. 225-233, 1990.
[2] Y. W. Yu and J. H. Wang, “Image Segmentation Based on Region Growing and Edge Detection”, IEEE International Conference on Systems, Man and Cybernetics, Vol. 6, pp. 798-803, 1999.
[3] Y. T. Kim, “Contrast Enhancement Using Brightness Preserving Bi-histogram Equalization”, IEEE Transactions on Consumer Electronics, Vol. 43, No. 1, pp. 1-8, 1997.
[4] W. K. Pratt, “Digital Image Processing”, Journal of Electronic Imaging, Vol. 16, pp 782, 2007.
[5] S. Ganapathy and T. G. Dennehy, “A New General Triangulation Method for Planar Contours”, ACM Siggraph Computer Graphics, Vol. 16, No. 3, pp. 69-75, 1982.
[6] D. Meyers, “Multiresolution Tiling”, Computer Graphics Forum, Vol. 13, No. 5, pp. 325-340, 1994.
[7] J. Jeong, K. Kim, H. Park, H. Cho and M. Jung, “B-Spline Surface Approximation to Cross-Sections Using Distance Maps”, International Journal of Advanced Manufacturing Technology, Vol. 15, pp. 876-885, 1992.
[8] Z. Zhang, K. Konno and Y. Tokuyama, “3D Terrain Reconstruction Based on Contours”, Ninth International Conference on Computer Aided Design and Computer Graphics, pp.325-330, 2005.
[9] W. E. Lorensen and H. E. Cline, “Marching Cubes:A High Resolution 3D Surface Construction Algorithm”, Computer Graphics, Vol. 21, pp. 163-169. 1987.
[10] T. Lewiner, H. Lopes, A. W. Vieira and G. Tavares, “Efficient Implementation of Marching Cubes’ Cases with Topological Guarantees” Journal of Graphics Tools, Vol. 8, pp. 1-15, 2003.
[11] H. C. Christian, M. Seebass, D. Stalling and M. Zockler, “A Generalized Marching Cubes Algorithm Based on Non-Binary Classifications”, ZIB Preprint SC-97-05, 1997.
[12] J. Jeong, K. Kim, H. Park, H. Cho and M. Jung, “A new Method for Solving Branching Problems in Surface Reconstruction”, International Journal of Advanced Manufacturing Technology, Vol. 15, pp. 876-885, 1992.
[13] L. G. Nonato, A. J. Cuadros-Vargas, R. Minghim and M. C. Oliveria, “Beta-Connection:Generating a Family of Models form Planar Cross Sections”, ACM Transactions on Graphics, Vol. 24, pp. 1239-1258, 2005.
[14] 許家群, 使用邊緣資訊之區域成長演算法與互動式編輯工具在
醫學影像分割上的應用, 國立台灣大學醫學工程研究所碩士論
文, 2006.
[15] 陳信豪, 二維CT醫學影像之骨頭輪廓自動擷取, 國立中央大學
機械工程研究所碩士論文, 2008.
[16] 陳聖傑, 以輪廓線為基礎的三維物件重建及其漫遊系統, 國立
成功大學電腦與通訊工程研究所碩士論文, 2004.指導教授 鄔蜀威、賴景義 審核日期 2008-7-8 推文 plurk
funp
live
udn
HD
myshare
netvibes
friend
youpush
delicious
baidu
網路書籤 Google bookmarks
del.icio.us
hemidemi
myshare