參考文獻 |
1. J. J. Cudahy, “Review of commercial innovative technologies for hazard
ous waste,” Environ. Prog.,Vo1. 18, No. 4, 1999, pp. 285–292.
2. Young Jun Park, Jong Heo,Vitrification of fly ash from municipal solid waste incinerator,Journal of Hazardous Materials ,Vol..91,pp 83-93,2002
3. Nishigaki, M.,”Reflecting Surface-melt Furnace and Utilization of the Slag”, Waste Management, Vol.16, pp. 445-452,1996.
4. Takaoka, M., Takeda, N. and Miura, S., ”The Behavior of Heavy Metals and Phosphorus in an Ash melting Process”, wat. Sci.Tech. Vol. 36, No.11, pp.275-282,(1997).
5. Wang, S.X., Liang, K.M., Zhang, H.L., and Gu, S.R., “Analysis of the Aluminothermic Reation Process”, High-Performance Ceramics, pp.745-748(2001).
6. Ashitani, Tatsuya, Tomoshige, Ryuichi, Oyadomari, Masafumi, Ueno, Tomoko,and Sakai, Kokki,”Synthesis of titanium carbide from woody materials by self-propagating high temperature synthesis”,Journal of the Ceramic Society of Japan, Vol: 110,No.1283, pp632-638,2002.
7. Barinova, T.V., Borovinskaya, I.P., Ratnikov, V.I., Ignatjeva, T.I., and Zakorzhevsky, V.V.,”SHS of Mineral-Like Ceramics for Consolidation of Radioactive Wastes”,Proceedings of the Fifth International Symposium on Self-Propagating High Temperature Synthesis SHS-99 , Moscow, Russia, 1999.
8. Chen ,K.J., Lee ,T.F., Cheng, H.Y. and Ko .Y.C.,”Thermal Expansion of Aluminosilicate Refractory Brick”, ibid., 61,pp 866-871,1982.
9. Chakraborty ,S.P. , Sharma ,I.G.,and Bose ,D.K.,”A study on the preparation of iron aluminium based intermetallic alloy by aluminothermic smelting technique”,Journal of Alloys and Compounds, Volume: 280, Issue: 1-2 ,pp255-261, 1998.
10. Cincotti, A., Orru, R., Pisu, M.,and Cao, G., “Self-Propagating Reactions for Environmental Protection: Reactor Engineering Aspects”,Ind. Eng. Chem. Res. ,Vol: 40, Issue:23,pp5291-5299 ,2001.
11. Chen. Weiwu. , Wang. Peiling. , Chen. Dianying. , Zhang. Baolin. , Jiang. Jiuxin. , Cheng .Yibing., and Yan .Dongsheng.,”Synthesis of (Ca,Mg)--sialon from slag by self-propagating high-temperature synthesis”,Journal of Materials Chemistry , Vol 12 , No.4 , pp1199-1202,2002.
12. Espelund, A. W.,”Aluminothermic Reduction-An illustrative experiment”,Journal of Chemical Education,Vol.52,No.6,pp400-402,1975
13. Eslamloo-Grami. M., and Munir. Z. A., Mater.Sci.Report3, pp227-365, 1989.
14. Francisco J. Arn?iz , Rafael Aguado, and Susana Arn?iz,”Microscale Thermite Reactions”,Journal of Chemical Education, Vol.75, No.12, pp1630-1631,1998
15. Houldsworth , H.S., and Cobb, J.W.,”The Reversible Thermal Expansion of Refractory Materials”, ibid.,6 , pp645-662 ,1923.
16. Hasselman, D.P.H.,”Unified Theory of Thermal Shock Fracture Initiation and Crack Propagation in Brittle Ceramics”, ibid., 52, pp600-604,1969.
17. Hasselman, D.P.H.,”Thermal Stress Crack Stability and Propagation in Severe Thermal Environments”, pp.89-103 in Ceramics in Severe Environments (Materials Science Research, Vol. 5, Edited by Kriegal , W.W., and H. Palmor III, Plenum, New York, 1971.
18. Kallio, M., Ruuskanen, P., Maki, J., Poylio, E.,and Lahteenmaki, S.,”Use of the aluminothermic reaction in the treatment of steel industry by-products”,Journal of Materials Synthesis and Processing, Vol :8, No: 2, pp87-92, 2000
19. Laszlo Takacs,”Self-sustaining reactions induced by ball milling”,Progress in Materials Science, Vol: 47, Issue: 4 ,pp355-414,2002.
20. Lu, Xin , Guo, Zhimeng , Luo, Shanggeng,, Lin, Tao, Yi n, Sheng, Yang, Jianwen,”Self-propagating high temperature synthesis of radioactive waste immobilization”,Journal of the Chinese Ceramic Society, Vol: 31,No. 2,pp205-208, 2003.
21. Matkowsky, B. J. and Sivashinsky, G. J., SIAM. J. Appl. Math. ,35 ,465 ,1978
22. Merzhanov ,A.G.,”Self-propagationg High-Temperature Synthesis: Twenty Years of Search and Findings “edited by Munir ,Z. A. and Holt J. B. VCH Pub, New York ,1990.
23. Muthuraman M., Arul Dhas N., and Patli K.C., “Combustion synthesis of oxide material for nuclear waste immobilization”,Bull, Sci, 17,pp977,1994.
24. Merzhanov, A.G.,”Ten Research Direction in the Future of SHS” Int. J. Self-Propag. High-Temp. Synth., Volume 4,1995.
25. Mei ,J., Halldearn, R.D., and Xiao, P.,”Mechanisms of the aluminium-iron oxide thermite reaction”,Scripta Materialia, Volume: 41, Issue: 5 ,pp541-548, 1999.
26. Makino, Atsushi and Law, C.K.,”On the correspondence between the homogeneous and heterogeneous theories of SHS”,Combustion and Flame, Vol: 124, Issue: 1-2,pp268-274,2001.
27. Matsunaga and Masahiro,”Method and apparatus for treating a waste substance using a thermit reaction”,U.S. patent,No.6225519,Appl.No.211306,2001
28. Merzhanov , A.G. and Sytschev, A.E.,”About Self-Propagating High-Temperature Synthesis”,由The Institute of Structural Macrokinetics, Russian Academy of Sciences
29. 曹 申,「提煉冶金技術與電爐集塵灰」,環安簡訊電子報第57期,2005。
30. 劉瓊芳,「回收電爐集塵灰有價物質之技術介紹」,環安簡訊電子報第57期,2005。
31. 劉瓊芳,「電爐集塵灰物化特性簡介」,環安簡訊電子報第57期,2005。
32. 藍得彰,陳明德,陳文卿,「國內電爐集塵灰產出現況及處理技術分析」,環安簡訊電子報第57期,2005。
33. 藍得彰,「電爐集塵灰回收技術的平台-環保科技園區介紹」,環安簡訊電子報第57期,2005。
34. 張文宗,「鋁渣資源化剩餘物之再利用探討」,國立成功大學資源工程學研究所碩士論文,2003。
35. 林浚泉,「再生鋁冶煉技術」,工研院,1980。
36. 鄭博中,「鋁浮渣回收處理方法」,清潔生產雙月刊,第12 期,1997。
37. 黃豐基,「鋁渣合成氧化鋁耐火骨材之研究」,83年度年會論文集,中國材料科學學會,1994。
38. 詹鎮鋒,潘鴻志,梁添源,「TAR鍵結堵泥材之配製與特性評估研究」,研究報告摘要,中國鋼鐵公司新材料研究發展處,1995。
39. 王榮輝, 喬泰智「資源再生技術服務中心延續計畫」,研究報告摘要,工業技術研究院能源與資源研究所, 1991。
40. 陳通「鋁渣回收」,技術與訓練20卷4期,1995。
41. 莊益宗,呂學仁,林巖騫,「廢棄鋁渣劑資源化」,第十四屆廢棄物處理技術研討會論文集,1999。
42. 林巖騫,呂學仁,王煥文,安孝宗,「鋁渣廢棄物在一貫作業鋼廠的資源化應用」,中國礦冶工程學會會刊44卷第4期,2000。
43. 喬泰智, 宋宏凱,「二次鋁渣純化/製造工業級氧化鋁之製程研究」,1998工業減廢暨永續發展研討會論文集,1998。
44. 朱志宏,「Thermite反應熔融處理都市垃圾焚化飛灰之研究」,國立中央大學環境工程研究所碩士論文,2004。
45. 阮江溥,「廢棄物衍生Thermite熔融劑之研究」,國立中央大學環境工程研究所碩士論文,2005。
46. 楊敏鑫,「廢棄物衍生Thermite熔融劑處理焚化飛灰-反應機制及重金屬移行之研究」,國立中央大學環境工程研究所碩士論文,2006。
47. 鍾宇翔,「廢棄物鋁熱反應熔融處理焚化飛灰-熔渣基本特性研究」,國立中央大學環境工程研究所碩士論文,2006。
48. 何春松,「灰渣熔融技術之發展」,國立台灣大學台大工程學刊,第84期,2002。
49. 江康鈺與王鯤生,「污泥熔融處理及資源再利用技術」,工業污染防治,第64期,1997。
50. 簡光勵,「都市垃圾焚化飛灰熔融過程金屬排放與腐蝕特性之研究」。
51. 柏原友,「反應金屬含有廢棄物金屬回收無害化處理」,2004。
52. 盛岡實,「高爐徐冷微粉末可能性」,2004。 |