參考文獻 |
Bae, J.W.; Potdar, H. S.; Kang, S.H.; Jun, K.W., “Coproduction of methanol and dimethyl ether from biomass-derived syngas on a Cu-ZnO-Al2O3/γ-Al2O3 hybrid catalyst,” Energy & Fuels, 22, 223-230, 2008.
Baltes, C.; Vukojevic, S.; Schuth F., “Correlations between synthesis, precursor, and catalyst structure and activity of a large set of CuO/ZnO/Al2O3 catalysts for methanol synthesis,” Journal of Catalysis, 258 , 334-344, 2008.
BP, “BP statistical review of world energy,” London, UK, 2002. (Available from http:www.bp.com/centres/energy2002)
Chen, H.Y.; Lau, S.P.; Chen, L.; Lin, J.; Huan, C.H.A.; Tan, K.L.; Pan, J.S., “Synergism between Cu and Zn sites in Cu/Zn catalysts for methanol synthesis,”Applied Surface Science, 152, 193-199, 1999.
Chen, M. H.; Chu, W.; Dai, X. Y.; Zhang, X. W., “New palladium catalysts prepared by glow discharge plasma for the selective hydrogenation of acetylene,” Catalysis Today, 89, 201-204, 2004.
Cranmore, R. G.; Stanton, E., “Natural gas in: Dawe R.A.,” editor. Modern Petroleum Tehcnology, Upstream Volume. Chishester: Institute of Petroleum, Johy Wiley and Sons Ltd, 337-408, 2000.
Eliasson, B. and Kogelschatz, U., “Nonequilibrium volume plasma chemical processing,” IEEE Transactins on Plasma Science, 19, 1063-1077, 1991.
Eliasson, B.; Hirth, M.; Kogelschatz, U., “Ozone synthesis from oxygen in dielectric barrier discharges,” Journal of Physics D: Applied Physics, 20, 1421-1437, 1987.
Fei, J.H.; Tang, X.J.; Huo, Z.Y.; Lou, H.; Zheng, X.M., “Effect of copper content on Cu-Mn-Zn/zeolite-Y catalysts for the synthesis of dimethyl ether from syngas,” Catalysis Communications, 7, 827-831, 2006.
Kim, H. H., “Nonthermal plama processing for air-pollution control: a historical review, current issues, and future prospects,” Plasma Processes and Polymers, 1, 91-110, 2004.
Koeppel, R.A.; Baiker, A.; Wokaun, A., “Copper zirconia catalysts for the synthesis of methanol from carbon-dioxide - influence of preparation variables on structural and catalytic properties of catalysts,” Applied Catalysis A: General, 84, 77, 1992.
Kuai, P.-Y.; Liu, C.-J.; Huo, P.-P., “Characterization of CuO-ZnO catalyst prepared by decomposition of carbonates using dielectric-barrier discharge plasma,” Catal Lett, 129, 493-498, 2009.
Lange, J. P., “Methanol synthesis: a short review of technology improvements,” Catalysis Today, 64, 3-8, 2001.
Lee, H. M., Juan, L.K., Chen, H.-L., Chang, M.B., Chen, S.H., Li, H.Y., Tzeng, C.C., “Plasma-treated catalyst for methanol synthesis from syngas,” IEEE Trans. Plasma Sci. (2009/05). (revision)
Li, J.L.; Zhang, X.G.; Inui, T., “Improvement in the catalyst activity for direct synthesis of dimethyl ether from synthesis gas through enhancing the dispersion of CuO/ZnO/-Al2O3 in hybrid catalysts,” Applied Catalysis A: General, 147, 23-33, 1996.
Li, Z.H.; Tian, S.X.; Wang, H. T.; Tian, H. B., “Plasma treatment of Ni catalyst via a corona discharge,” Journal of Molecular Catalysis A: Chemical, 211, 149-153, 2004.
Lihong, H.; Wei, C.; Junqiang, X.; Jingping, H.; Min, Y., “Effect of glow discharge plasma on rhodium-based catalyst for oxygenates synthesis,” Front. Chemistry Energy China, 1(1), 16-19, 2007.
Liu, C. J.; Vissokov, G. P.; Jang, B. W.L., “Catalyst preparation using plasma technologies,” Catalysis Today, 72, 173-184, 2002.
Liu, C.J.; Zou, J.; Yu, K.; Cheng, D.; Han, Y.; Zhan, J.; Ratanatawanate, C.; Jang B. W.L., “ Plasma application for more environmentally friendly catalyst preparation,” Pure Appl. Chem., 78(6), 1227-1238, 2006.
Liu, X.Z.; Wang, J.G.; Liu, C.J.; He, F.; Eliasson, B., “Partial oxidation of methane to syngas over Ni-Fe/Al2O3 catalyst with plasma enhanced activity,” Reaction Kinetics and Catalysis Letters, 79, 69-76, 2003.
Liu,C.J.; Wang, J.X.; Yu, K.L.; Eliasson, B.; Xia, Q.; Xue, B.; Zhang, Y.H., “Floating double probe characteristics of non-thermal plasmas in the presence of zeolite,” Journal of Electrostatics, 54, 149, 2002.
Mao, D.; Yang, W.; Xia, J.; Zhang, B.; Song, Q.; Chen, Q., “Highly effective hybrid catalyst for the direct synthesis of dimethyl ether from syngas with magnesium oxide-modified HZSM-5 as a dehydration component,” Journal of Catalysis, 230, 140-149, 2005.
Moradi, G.R.; Ghaneia, R.; Yaripour, F., “ Comparison of the performance of different hybrid catalysts for direct synthesis of dimethyl ether from synthesis gas,” React. Kinet. Catal. Lett., 92(1), 137-145, 2007.
Moradi, G.R.; Nosrati, S.; Yaripor, F., “Effect of the hybrid catalysts preparation method upon direct synthesis of dimethyl ether from synthesis gas,” Catalysis Communications,8 ,598-606, 2007.
Moretti, G.; Ferraris, G.; Fierro, G.; Jacono, M. L., “An XPS study of the reduction process of CuO–ZnO–Al2O3 catalysts obtained from hydroxycarbonate precursors,” Surface and Interface Analysis, 38, 224-228, 2006.
Nakamura, J.; Uchijima, T.; Kanai, Y.; Fujitani, T., “The role of ZnO in Cu/ZnO methanol synthesis catalysts,” Catalysis Today, 28, 223-230, 1996
Ratanatawanate, C.; Macias, M.; Jang, B. W.L., “Promotion effect of the nonthermal RF plasma treatment on Ni/Al2O3 for benzene hydrogenation,” Ind. Eng. Chem. Res., 44(26), 9868-9874, 2005.
Raudaskoski, R.; Niemela, M.V.; Keiskia, R.L., “The effect of ageing time on co-precipitated Cu/ZnO/ZrO2 catalysts used in methanol synthesis from CO2 and H2,” Topics in Catalysis, 45, 1-4, 2007.
Satterfield, C. N., “Heterogeneous catalysis in industrial practice,” 2nd Ed., McGraw-Hill, New York, 1991.
Shen, G.C.; Fujita, S.I.; Matsumoto, S.; Takezawa, N., “Steam reforming of methanol on binary Cu/ZnO catalysts: effect of preparation condition upon precursors, surface structure and catalytic activity,” Journal of Molecular Catalysis A: Chemical, 124, 123-136, 1997.
Takeguchi, T.; Yanagisawa, K.I.; Inui, T.; Inoue, M., “Effect of the property of solid acid upon syngas-to-dimethyl ether conversion on the hybrid catalysts composed of Cu-Zn-Ga and solid acids,” Applied Catalysis A: General, 192, 201-209, 2000.
Tijm, P.J.A.; Waller, F.J.; Brown, D.M., “Methanol technology developments for the new millennium,” Applied Catalysis A: General, 221, 275-282, 2001.
Wang J.G.; Liu C.J.; Zhang Y.P.; Yu, K. L.; Zhu, X. L.; He, F., “Partial oxidation of methane syngas over glow discharge plasma treated Ni-Fe/Al2O3 catalyst,” Catalysis Today, 89, 183-191, 2004.
Yang, C.; Ma, Z.; Zhao, N.; Wei, W.; Hu, T.; Sun, Y. “Methanol synthesis from CO2-rich syngas over a ZrO2 doped CuZnO catalyst,” Catalysis Today, 115, 222-227, 2006.
Yang, R.; Yu, X.; Zhang, Y.; Li, W.; Tsubaki, N. “A new method of low-temperature methanol synthesis on Cu/ZnO/Al2O3 catalysts from CO/CO2/H2,” Fuel, 87, 443-450, 2008.
Yang, R.; Zhang, Y.; Iwama, Y.; Tsubaki, N., “Mechanistic study of a new low-temperature methanol synthesis on Cu/MgO catalysts,” Applied Catalysis A: General, 288, 126-133, 2005.
Yoo, K.S.; Kim, J.H.; Park, M.J.; Kim, S.J., Joo, O.S.; Jung, K.D., “Influence of solid acid catalyst on DME production directly from synthesis gas over the admixed catalyst of Cu/ZnO/Al2O3 and various SAPO catalysts,” Applied Catalysis A: General, 330, 57-62, 2007.
Zhu, Y. R.; Li, Z. H.; Zhou, Y. H.; Lv, J.; Wang, H. T., “Plasma treatment of Ni and Pt catalysts for partial oxidation of methane,” Reaction Kinetics and Catalysis Letters, 87, 33-41, 2006.
Zou, J.J.; Liu, C.J.; Zhang, Y.P., “Control of the metal-support interface of NiO-loaded photocatalysts via cold plasma treatment,” Langmuir, 22, 2334-2339, 2006.
李灝銘,「以低溫電漿去除揮發性有機物之研究」,中央大學環境工程研究所博士論文,中壢市,2001。
高正雄,電漿化學,復漢出版社,台南,1991。
賀黎明、沈召軍,「甲烷的轉化和利用」,化學工業出版社,2005。
萬其正,「石化工業製程技術」,高立圖書有限公司,2004。
|