參考文獻 |
Acharya, S., Dutta, S., Myrum, T.A. and Baker, R.S. (1994) “Turbulent flow past a surface-mounted two-dimensional rib”, Journal of Fluids Engineering, ASME, Vol. 116, pp. 238-246
Antoniou, J. and Bergeles, G. (1988) “Development of the reattached flow behind surface-mounted two-dimensional prisms”, Journal of Fluids Engineering, ASME, Vol. 110, pp. 127-133
Bergeles, G. and Athanassiadis, N. (1983) “The flow past a surface-mounted obstacle”, Journal of Fluids Engineering, ASME, Vol. 105, pp. 461-463
Boerner T. and Leutheusser H.J. (1984) “Calibration of split-fiber for use in bubbly two-phase flow”, DISA Information No.29, Jan, pp. 10-13
Castro, I.P. (1979) “Relaxing wakes behind surface-mounted obstacles in rough wall boundary layers”, J. Fluid Mech., Vol. 93, pp. 631-659
Castro, I.P. and Cockrell, D.J. (1984) “The flow past a surface-mounted obstacle”, Journal of Fluids Engineering, ASME, Vol. 106, pp. 111-112
Counihan, J. (1975) “Adiabatic atmospheric boundary layers, a review and analysis of data from the period 1880-1972.” Atmospheric Environment, 9, pp. 871-905
Goldstein, R.J. (1996) Fluid Mechanics Measurements, 2nd edition, Taylor & Francis
Hsieh, S.S. and Huang, D.Y. (1987) “Flow characteristics of laminar seperation on surface-mounted ribs”, AIAA Journal,Vol. 25, pp. 819-823
Hsieh, S.S. and Huang, D.Y. (1987) “Flow characteristics of laminar seperation on surface-mounted ribs”, AIAA Journal,Vol. 25, pp. 819-823
Hunt, J.C.R. and Fernholz, H. (1975) “Wind-tunnel simulation of the atmospheric boundary layer, a report on Euromech 50.” J. Fluid Mech. 70, pt. 3, pp. 543-559
Irwin, H.P. (1981) “The design of spires for wind simulation”, J. of Wind Engineering and Industrial Aerodynamics, 7, pp. 361-366
Keffer, J.F., Budny, R.S. and Kawall, J.G. (1978) “Digital technique for the simultaneous measurements of velocity and temperature”, Rev. Sci. Instrum, 49, 1343-6
Lee, S. J. and Kim, H.-B. (1999) “Laboratory measurements of velocity and turbulence field behind porous fences” , J. of Wind Engineering and Industrial Aerodynamics, 80, pp. 311-326
Lin, Y.F. and Sheu, M.J. (1990) “Calibration of turbulent intensities and flow direction by split film probe”, ASME Fluid Measurement and Instrumentation Forum, Toronto, Canada
Ogawa, Y. and Oikawa, S. (1982) “A field investigation of the flow and diffusion around a model cube” Atmospheric Environment, 16, pp. 207-222
Ogawa, Y. and Oikawa, S. (1982) “A field investigation of the flow and diffusion around a model cube” Atmospheric Environment, 16, pp. 207-222
Ogawa, Y. and Oikawa, S. (1982) “A field investigation of the flow and diffusion around a model cube” Atmospheric Environment, 16, pp. 207-222
Rae, W.H.J., Barlow, J.B. and Pope, A. (1999) “Low-speed wind tunnel testing”, Johns Wiley & Sons, Inc.
Roger, S.T. (1993) “Building amplification factors for sources near buildings: a wind-tunnel study” Atmospheric Environment, Vol. 27A, pp. 2313-2325
Schofield, W.H. and Logan, E. (1990) “Turbulent shear flow over surface mounted obstacles”, Journal of Fluids Engineering, ASME, Vol. 112, pp. 376-385
Schofield, W.H. and Logan, E. (1990) “Turbulent shear flow over surface mounted obstacles”, Journal of Fluids Engineering, ASME, Vol. 112, pp. 376-385
Shiau, B.S. (1995) “Measurement of the Reynolds stress structure behind multiple windbreaks across-wind”, J. of Wind Eng. and Industrial Aerodyn., Vol.54/55, pp.561-571
Simiu, E. and Scanlan, R.H. (1996) “Wind effect on structures”, 3rd edition, Johns Wiley & Sons, Inc.
Tennekes, H. and Lumley, J.L. (1972) “A First Course in Turbulence”, MIT Press.
Yoon, K. and Warhaft, Z. (1990) “The evolution of grid-generated turbulence under conditions of stable thermal stratification.”, J. Fluid Mech., Vol. 215, pp. 601-638
王錦堂 (1984) “建築應用物理學” , 臺隆書店
周一志 (1995) “紊流流經二維方形突出物之數值模擬” , 國立臺灣大學造船及海洋工程研究所碩士論文
張仁德 (1995) “風經結構物之數值模擬” , 國立臺灣大學土木工程研究所博士論文
朱佳仁 (1997) “國立中央大學大型環境風洞之簡介” , 國立中央大學土木工程學系
黃隆明 (1997) “不透風式構造物之防風功效研究” , 國立中興大學水土保持學研究所博士論文
朱佳仁 (1999) “建築物之風場環境評估規範研議” , 內政部建築研究所研究報告
許皓昌 (1999) “透風式防風牆風場特性之實驗研究” , 國立中央大學土木工程研究所碩士論文
陳謹偉 (1999) “矩形柱體來流端馬蹄型渦流流場之實驗探討” , 國立中興大學土木工程研究所碩士論文 |