參考文獻 |
[1.1] A. Inoue, “Stabilization of metallic supercooled liquid and bulk amorphous alloys”, Acta Mater., Vol 48 , pp. 279–306 , 2000.
[1.2] J.R. Scully, A. Gebert, J.H. Payer, “Corrosion and related mechanical properties of bulk metallic glasses”, J. Mater. Res., Vol 22, pp. 303–313, 2007.
[1.3] A. Inoue, B.L. Shen, H. Koshiba, H. Kato, A.R. Yavari, “Ultra-High Strength above 5000 MPa and Soft Magnetic Properties of Co-Fe-Ta-B Bulk Glassy Alloys”, Acta Mater., Vol 52, pp. 1631–1637, 2004.
[1.4] J. Eckert, J. Das, S. Pauly, C. Duhamel, “Mechanical properties of bulk metallic glasses and composites”, J. Mater. Res., Vol 22, pp. 285–301, 2007.
[1.5] M.W. Chen, “Mechanical behavior of metallic glasses-microscopic understanding of strength and ductility”, Annu. Rev. Mater. Res., Vol 38, p. 14.1, 2008.
[1.6] C.A. Schuh, T.C. Hufnagel, U. Ramamurty, “Mechanical behavior of amorphous alloys”, Acta Mater., Vol 55, p. 4067, 2007.
[1.7] A.R. Yavari, J.J. Lewandowski, J. Eckert, “Mechanical Properties of Bulk Metallic Glasses”, MRS Bull, Vol 32 (8) p. 635, 2007.
[1.8] H. Bei, S. Xie, E.P. George, “Softening caused by profuse shear banding in a bulk metallic glass”, Phys. Rev. Lett., Vol 96, p. 105503, 2006.
[1.9] B.G. Yoo, J. Jang, “A study on the evolution of subsurface deformation in a Zr-based bulk metallic glass during spherical indentation” , J. Phys. D: Appl. Phys., Vol 41, p. 074017, 2008.
[1.10] J. Eckert, J. Das, S. Pauly, C. Duhamel, J. Mater. , “Mechanical properties of bulk metallic glasses and composites”, Res., Vol 22, p. 285, 2007.
[1.11] C. Fan, R.T. Ott, T.C. Hufnagel, “Metallic glass matrix composite with precipitated ductile reinforcement”, Appl. Phys. Lett., Vol 81, p.1020, 2002.
[1.12] J. Das, M.B. Tang, K.B. Kim, R. Theissmann, F. Baier, W.H. Wang, J. Eckert, “Designing tensile ductility in metallic glasses”, Phys.Rev. Lett., Vol 94, p. 205501, 2005.
[1.13] D.C. Hofmann, J.Y. Suh, A. Wiest, G. Duan, M.L. Lind, M.D. Demetriou, W.L.Johnson, “Designing metallic glass matrix composites with high toughness and tensile ductility”, Nature, Vol 451 (28), p. 1085, 2008.
[1.14] H. Ma, J. Xu, E. Ma, “Appl. Mg-based bulk metallic glass composites with plasticity and high strength”, Phys. Lett., Vol 83, p. 2793, 2003.
[1.15] A.H. Brother, D.C. Dunand, Q. Zheng, J. Xu, J., “Amorphous Mg-based metal foams with ductile hollow spheres”, Appl. phys. , Vol 102, p. 023508, 2007.
[1.16] J.B. Li, J.S.C. Jang, C. Li, S.R. Jian, P.H. Tsai, J.D. Hwang, J.C. Huang, T.G. Nieh., “Significant plasticity enhancement of ZrCu-based bulk metallic glass composite dispersed by in situ and ex situ Ta particles”, Vol 551, pp.249-254 ,2012.
[1.17] J.S.C. Jang, J.Y. Ciou, T.H. Hung, J.C. Huang, X.H. Du, “Enhanced mechanical performance of Mg metallic glass with porous Mo particles”, App. Phys. Lett., Vol 92, p.011930, 2008.
[1.18] J.S.C. Jang, S.R. Jian, T.H. Li, J.C. Huang, C.Y.A. Tsao, C.T. Liu, “Structural and mechanical characterizations of ductile Fe particles-reinforced Mg-based bulk metallic glass composites”, J. Alloys Compd., Vol 485, pp. 290–294 , 2009.
[1.19] J.S.C. Jang, J.Y. Ciou, T.H. Li, J.C. Huang, T.G. Nieh, “Prominent plasticity of Mg-based bulk metallic glass composites by ex-situ spherical Ti particles”, Intermetallics, Vol 18, p.451, 2010.
[1.20] J.S.C. Jang, D.J. Pan, S.R. Jian, Y.H. Wu, J.C. Huang, T.G. Nieh, “Thermal and Mechanical Properties of The Zr-based Bulk Metallic Glass Composites With Ductile In-situ Dispersed Ta-rich particles”, Intermetallics, Vol 18, p.560, 2010.
[1.21] J.S.C. Jang, Y.S. Chang, T.H. Li, P.J. Hsieh, J.C. Huang, Chi.Y.A. Tsao, “Plasticity Enhancement of Mg58Cu28.5Gd11Ag2.5 Based Bulk Metallic Glass Composites Dispersion Strengthened by Ti Particles”, J. Alloys Compd., Vol 504, p. S102 , 2010.
[1.22] P.J. Hsieh, L.C. Yang, H.C. Su, C.C. Lu, J.S.C. Jang, “Improvement of mechanical properties in MgCuYNdAg bulk metallic glasses with adding Mo particles”, Alloys Compd., Vol 504, p. S98, 2010.
[1.23] S. Pauly, S. Gorantla, G. Wang, U. Kuhn, J. Eckert, “Transformation-mediated ductility in CuZr-based bulk metallic glasses”, Nat. Mater, Vol 9, p.473, 2010.
[1.24] G. He, Z.F. Zhang, W. Loser, J. Eckert, L. Schultz, “Effect of Ta on glass formation, thermal stability and mechanical properties of a Zr52.25Cu28.5Ni4.75Al9.5Ta5 bulk metallic glass”, Acta Mater., Vol 51, p. 2383, 2003.
[1.25] Binary Phase Diagram, 2nd ed. plus updates, ASM International, OH, USA, 1996.
[1.26] G. He, Z. F. Zhang, W. Loser, J. Eckert, L. Schultz, “Effect of Ta on glass formation, thermal stability and mechanical properties of a Zr52.25Cu28.5Ni4.75Al9.5Ta5 bulk metallic glass”, Acta Mater., Vol 51, p. 2383, 2003.
[1.27] Binary Phase Diagram, 2nd edition plus updates, ASM International, Ohio, USA, 1996.
[1.28] J. S. C. Jang, S. R. Jian, D.J. Pan, Y. H. Wu, J. C. Huang, T. G. Nieh, “Thermal and mechanical characterizations of a Zr-based bulk metallic glass composite toughened by in-situ precipitated Ta-rich particles”, Intermetallics, Vol 18,p. 560, 2010.
[1.29] J. Schroers, Q. Pham, J.A. Desai, “ Microelectromech”, Syst., Vol 16,p. 240, 2007.
[1.30] P. Sharma, N. Kaushik, H. Kimura, Y. Saotome, A. Inoue, Nanotechnology 18 (2007) 035302.
[1.31] G. Kumar, H.X. Tang, J. Schroers, “Nanomoulding using thermoplastic forming with bulk metallic glass”, Nat. Lett., Vol 457, p.868, 2009.
[1.32] J. Schroers, Adv. Mater. 21 (2009) 1.
[1.33] D. Wang, G. Liao, J. Pan, Z. Tang, P. Peng, L. Liu, T. Shi, “Superplastic micro-forming of Zr65Cu17.5Ni10Al7.5 bulk metallic glass with silicon mold using hot embossing technology”, J. Alloys Compd., Vol 484, p.118, 2009.
[1.34] Brothers AH, Dunand DC., Adv Mater ,Vol 17,p. 484, 2005.
[1.35] Paital SR, Dahotre NB. ,Mater Sci Eng R, Vol 66, p.1, 2009.
[1.36] Gotman I. J Endourol ,Vol 11, p.383, 2009.
[1.37] Schroers J, Kumar JG, Hodges TM, Chan S, Kyriakides TR. J Miner, Metals, Mater ,Vol 61,p. 21, 2009.
[1.38]Demetriou MD, Wiest A, Hofmann DC, Johnson WL, Han B, Wolfson N, et al. J Miner, Metals, Mater,Vol 62,p.83, 2010.
[1.39]Lin CH, Huang CH, Chuang JF, Lee HC, Liu MC, Du XH, et al. Mater Sci Eng C ,Vol 32, p. 2578, 2012.
[1.40] Guo SF, Liu Z, Chan KC, Chen W, Zhang HJ, Wang JF, et al. Mater Lett ,Vol 84,p. 81, 2012.
[1.41] Schroers J, Veazey C, Johnson WL., Appl Phys Lett., Vol 82, p. 370, 2003.
[1.42] Wada T, Wang X, Kimura H, Inoue A. Mater Lett , Vol 63, p. 858, 2009.
[1.43] Wada T, Inoue A. Mater Trans JIM , Vol 44, p.2228, 2003.
[1.44]Brothers AH, Dunand DC., Appl Phys Lett .,Vol 84, p. 1108, 2004.
[2.1] R. Doglione, S. Spriano, L. Battezzati, Static mechanical characterization of a bulk amorphous and nanocrystalline Zr 40 Ti 14 Ni 11 Cu 10 Be 25 alloy, PI1 SO9659773(97)00188-8
[2.2] Nishiyama, N. and A. Inoue, “Glass-forming ability of Pd42.5Cu30Ni7.5P20 alloy with a low critical cooling rate of 0.067 K/s”, Appl. Phys. Lett. Vol 80, pp. 568–570, 2002.
[2.3] Inoue, A., N. Nishiyama, and H.M. Kimura, “Preparation and thermal stability of bulk amorphous Pd40Cu30Ni10P20 alloy cylinder of 72 mm in diameter”, Mater. Trans.JIM , Vol 38, pp. 179–183, 1997.
[2.4] Lu, I.-R., G. Wilde, G.P. Gorler, and R. Willnecker, “Thermodynamic properties of Pd-based glass-forming alloys”, J. Non-Cryst. Solids, pp. 250–252: 577–581,1999.
[2.5]. K. Matusita, T. Komatsu and R. Yokota, “Kinetics of non-isothermal crystallization process and activation energy for crystal growth in amorphous materials” , J. Mater. Sci., Vol 19,p.291, 1984.
[2.6] Z.F. Zhang, J. Eckert, L. Schultz, “Difference in compressive and tensile fracture mechanisms of Zr59Cu20Al10Ni8Ti3 bulk metallic glass”, Acta Materialia, Vol 51, pp. 1167-1179, 2003.
[2.7]. W. Paul and R. J. Temkin, Amorphous germanium, I. A model for the structural and optical properties ,Adv. Phys., 1973, p.531.
[2.8]. R. Liu, J. Li, K. Dong, C. Zheng and H. Liu, Mater. Sci. Eng., vol.94, 2002, p.141.
[2.9] R. W. Cahn, P. Hassen and E. J. Kramer(ed), “Glasses and amorphous materials” ,Materials Science and Technology, Vol 9, New York, USA, 1991.
[2.10]. Y. Saito, H. Utsunomiya, N. Tsuji and T. Sakai, “Novel ultra-high straining process for bulk materials development of the accumulative roll-bonding (ARB) process”, Acta Mater., vol.47, p.579,1999.
[2.11] W.H. Wang et al., Bulk metallic glasses, Mater. Sci. Eng. R, vol.44, 2004, p.45-89.
[2.12]. A. Inoue, W. Zhang, T. Zhang and K. Kurosaka, A. Inoue, W. Zhang, T. Zhang and K. Kurosaka , Acta Mater., vol.49, 2001, p.2645.
[2.13]. A. Inoue, W. Zhang, T. Zhang and K. Kurosaka, “Formation and mechanical properties of Cu–Hf–Ti bulk glassy alloys” ,J. Mater. Res., Vol.16, p. 2836, 2001.
[2.14]. T. D. Shen and R.B. Schwarz, “Bulk ferromagnetic glasses prepared by flux melting and water quenching” ,Appl. Phys. Lett., Vol.75, p. 49, 1999.
[2.15].B.S. Murty and K. Hono, “Formation of nanocrystalline phases in glassy matrix in melt-spun Mg-Cu-Y alloys” ,Mater. Trans., JIM, Vol 41, p.1538, 2000.
[2.16]. Z.P. Lu and C.T. Liu, “A new glass-forming ability criterion for bulk metallic glasses”, Acta Mater., Vol 50, pp. 3501-3512, 2002.
[2.17]. X.H. Du, J.C. Haung, C.T. Liu, Z.P. Liu, “New Criterion of Glass Forming Ability for Bulk Metallic Glasses” ,Appl. Phys. Lett., Vol 101, 2007, p.86-108.
[2.18]. Z.P. Lu, X. Hu, Y. Li, and S.C. Ng, “Glass forming ability of La-Al-Ni-Cu and Pd-Si-Cu bulk metallic glasses” ,Mater. Sci. Eng., Vol 304-306, p.679, 2001.
[2.19] M. Avrami, J. Chem, “Kinetics of Phase Change. II. Transformation-Time Relations for Random Distribution of Nuclei” ,Phys., Vol 8, p.212, 1940.
[2.20] T.A. Waniuk, J. Schroers and W.L. Johnson, “Critical cooling rate and thermal stability of Zr-Ti-Cu-Ni-Be alloys”, Appl. Phys. Lett., Vol.78, p. 1213, 2001.
[2.21] T.D. Shen and R.B. Schwarz, “Bulk amorphous Pd–Ni–Fe–P alloys: Preparation and characterization”, J. Mater. Res., vol.14, , p. 2107, 1999.
[2.22] Luborsky, F.E., “Perspective on application of amorphous alloys in magnetic devices. In Amorphous Magnetism II, eds. R.A. Levy. and R. Hasegawa”, New York: Plenum Press, pp. 345–368, 1977.
[2.23] Lu, K. , “Nanocrystalline metals crystallized from amorphous solids: Nanocrystallization, structure, and properties”, Mater. Sci. Eng. Rep. R16, pp. 161–221, 1996.
[2.24] Inoue, A. , “Amorphous, nanoquasicrystalline and nanocrystalline alloys in Al-based systems”, Prog. Mater. Sci. 43, pp. 365–520, 1998.
[2.25] Inoue, A., W. Zhang, T. Tsurui, A.R. Yavari, and A.L. Greer, “Unusual room-temperature compressive plasticity in nanocrystal-toughened bulk copper-zirconium glass”, Philos. Mag. Lett. 85 , pp. 221–229, 2005.
[2.26] Hoffmaan, D.C., J.-Y. Suh, A. Wiest, G. Duan, M.-L. Lind, M.D. Demetriou, and W.L. Johnson, “Designing metallic glass matrix composites with high toughness and tensile ductility”, Nature 451, pp. 1085–1090, 2008.
[2.27] Koster, U. and U. Herold, “Crystallization of metallic glasses. In Glassy Metals I, eds. H.-J. Guntherodt and H. Beck,”, Berlin, Germany: Springer-Verlag, pp. 225–259, 1981
[2.28] Scott, M.G. , “Crystallization. In Amorphous Metallic Alloys, ed. F.E. Luborsky”, London, U.K. : Butterworths, pp. 144–168, 1983.
[2.29] Ranganathan, S. and C. Suryanarayana, “Amorphous to crystalline phase transformations”, Mater. Sci. Forum 3, pp.173–185, 1985.
[2.30] Waseda, Y. , “The Structure of Non-Crystalline Materials”, New York: McGraw-Hill, 1980.
[2.31] C. Suryanarayana, A. Inoue, BULK METALLIC GLASSES, CRC Press, International Standard Book Number-13:978-1-4200-8597-6
[2.32] J. Eckert, J. Das, S. Pauly, C. Duhamel, J. Mater. , “Transformation-mediated ductility in CuZr-based bulk metallic glasses”, Mechanical properties of bulk metallic glasses and composites, Res. 22, p. 285, 2007.
[2.33] C. Fan, R.T. Ott, T.C. Hufnagel, “Metallic glass matrix composite with precipitated ductile reinforcement” , Appl. Phys. Lett. 81, p.1020, 2002.
[2.34] J. Das, M.B. Tang, K.B. Kim, R. Theissmann, F. Baier, W.H. Wang, J. Eckert, “Designing tensile ductility in metallic glasses”, Phys.Rev. Lett. 94, 2005.
[2.35] D.C. Hofmann, J.Y. Suh, A. Wiest, G. Duan, M.L. Lind, M.D. Demetriou, W.L.Johnson, “Designing metallic glass matrix composites with high toughness and tensile ductility”, Nature 451, p.1085, 2008.
[2.36] H. Ma, J. Xu, E. Ma, “Appl. Mg-based bulk metallic glass composites with plasticity and high strength”, Phys. Lett. 83, p. 2793, 2003.
[2.37] A.H. Brother, D.C. Dunand, Q. Zheng, J. Xu, J. , “Amorphous Mg-based metal foams with ductile hollow spheres”, Appl. phys. , p.102, 2007.
[2.38] L. Liu, K.C. Chen, M. Sun, Q. Chen, “Significant plasticity enhancement of ZrCu-based bulk metallic glass composite dispersed by in situ and ex situ Ta particles”, Mater. Sci. Eng. , p.p. 445–446, 2007.
[2.39] J.S.C. Jang, J.Y. Ciou, T.H. Hung, J.C. Huang, X.H. Du, “Enhanced mechanical performance of Mg metallic glass with porous Mo particles”, App. Phys. Lett. , p.92, 2008.
[2.40] J.S.C. Jang, S.R. Jian, T.H. Li, J.C. Huang, C.Y.A. Tsao, C.T. Liu, “Structural and mechanical characterizations of ductile Fe particles-reinforced Mg-based bulk metallic glass composites”, J. Alloys Compd.485, pp.290–294, 2009.
[2.41] J.S.C. Jang, J.Y. Ciou, T.H. Li, J.C. Huang, T.G. Nieh, “Prominent plasticity of Mg-based bulk metallic glass composites by ex-situ spherical Ti particles”, Intermetallics 18, p.451, 2010.
[2.42] J.S.C. Jang, D.J. Pan, S.R. Jian, Y.H. Wu, J.C. Huang, T.G. Nieh, “Thermal and Mechanical Properties of The Zr-based Bulk Metallic Glass Composites With Ductile In-situ Dispersed Ta-rich particles”, Intermetallics 18, p.560, 2010.
[2.43] J.S.C. Jang, Y.S. Chang, T.H. Li, P.J. Hsieh, J.C. Huang, Chi.Y.A. Tsao, “Plasticity Enhancement of Mg58Cu28.5Gd11Ag2.5 Based Bulk Metallic Glass Composites Dispersion Strengthened by Ti Particles”, J. Alloys Compd., 2010.
[2.44] P.J. Hsieh, L.C. Yang, H.C. Su, C.C. Lu, J.S.C. Jang, “Improvement of mechanical properties in MgCuYNdAg bulk metallic glasses with adding Mo particles”, J. Alloys Compd. ,2010.
[2.45] S. Pauly, S. Gorantla, G. Wang, U. Kuhn, J. Eckert, “Transformation-mediated ductility in CuZr-based bulk metallic glasses”, Nature Materials, pp. 473-477, 2010.
[2.46] G. He, Z.F. Zhang, W. Loser, J. Eckert, L. Schultz, “Effect of Ta on glass formation, thermal stability and mechanical properties of a Zr52.25Cu28.5Ni4.75Al9.5Ta5 bulk metallic glass”, Acta Mater. , vol51. , pp.2383-2395, 2003.
[2.47] Binary Phase Diagram, 2nd ed. plus updates, ASM International, OH, USA, 1996.
[2.48] Amiya, K., A. Urata, N. Nishiyama, and A. Inoue, “Fe–B–Si–Nb bulk metallic glasses with high strength above 4000 MPa and distinct plastic elongation”, Mater. Trans. , vol. 45, pp. 1214–1218, 2004.
[2.49] Liu, F.J., Q.W. Yang, S.J. Pang, C.L. Ma, and T. Zhang, “Ductile Fe-based BMGs with high glass forming ability and high strength”, Mater. Trans. , vol. 49, pp.231–234, 2008.
[2.50] Inoue, A., B.L. Shen, and C.T. Chang , “Super-high strength of over 4000 MPa for Fe-based bulk glassy alloys in [(Fe1−xCox)0.75B0.2Si0.05]96Nb4 system”, Acta Mater., vol. 52, pp. 4093–4099, 2004.
[2.51] Gu, X.J., S.J. Poon, and G.J. Shiflet, “Effects of carbon content on the mechanical properties of amorphous steel alloys”, Scr. Mater. , vol.57, pp. 289–292, 2007.
[2.52] Chen, D., A. Takeuchi, and A. Inoue. , “Gd–Co–Al and Gd–Ni–Al bulk metallic glasses with high glass forming ability and good mechanical properties”, Mater. Sci. Eng. , pp. 226–230, 2007.
[2.53]Yuan, G.Y., K. Amiya, and A. Inoue, “Structural relaxation, glass-forming ability and mechanical properties of Mg–Cu–Ni–Gd alloys”, J. Non-Cryst. Solids, vol.351, pp. 729–735, 2005.
[2.54] Xu, D.H., B. Lohwongwatana, G. Duan, W.L. Johnson, and C. Garland, “Bulk metallic glass formation in binary Cu-rich alloy series – Cu100−xZrx (x = 34,36, 38.2, 40 at.%) and mechanical properties of bulk Cu64Zr36 glass” , Acta Mater. ,vol. 52, pp. 2621–2624, 2004.
[2.55] T. A. Waniuk, J. Schroers and W. L. Johnson, “Critical cooling rate and thermal stability of Zr–Ti–Cu–Ni–Be alloys” , Appl. Phys. Lett.,
vol.78, p.1213. , 2001
[4.1] S. Xie, E.P. George, “Hardness and shear band evolution in bulk metallic glasses after plastic deformation and annealing”, Acta Mater. , vol. 56, p.5202, 2008.
[4.2] K.W. Chen, J.F. Lin, Int. J. , “Investigation of the relationship between primary and secondary shear bands induced by indentation in bulk metallic glasses”, International Journal of Plasticity, vol.26, pp. 1645-1658, 2010.
[4.3] K.W. Chen, S.R. Jian, P.J. Wei, J.S.C. Jang, J.F. Lin, “A study of the relationship between semi-circular shear bands and pop-ins induced by indentation in bulk metallic glasses”, Intermetallics, vol.18, p.1572, 2010.
[4.4] Z.F. Zhang, G. He, J. Eckert, L. Schultz, “Fracture Mechanisms in Bulk Metallic Glassy Materials”, Phys. Rev. Lett. , vol. 91, 2003.
[4.5] A.C. Lund, C.A. Schuh, “Yield surface of a simulated metallic glass”, Acta. Mater. , vol. 51, p. 5399, 2003.
[4.6] X.K. Xi, D.Q. Zhao, M.X. Pan, W.H. Wang, Y. Wu, J.J. Lewandowski, “Fracture of Brittle Metallic Glasses: Brittleness or Plasticity”, Phys. Rev. Lett. , vol. 94, pp.77-87, 2005.
[4.7] W. Zhang, Q. Zhang, A. Inoue, “Formation and thermal stability of new Zr–Cu-based bulk glassy alloys with unusual glass-forming ability”, J. Alloys Compd., Vol 483, p. 112, 2009.
[4.8] D.C. Hofmann, J.Y. Suh, A. Wiest, G. Duan, M.L. Lind, M.D. Demetriou, W.L.Johnson, “Designing metallic glass matrix composites with high toughness and tensile ductility”, Nature, Vol 451 (28), p.1085, 2008.
[4.9] Z. P. Lu and C. T. Liu, “A new approach to understanding and measuring glass formation in bulk amorphous materials”, Intermetallics, Vol 12, p. 1035, 2004.
[4.10] X. H. Du, J. C. Huang, C. T. Liu, and Z. P. Lu, Jap., “New criterion of glass forming ability for bulk metallic glasses”, J. Appl. Phys., Vol 101, p. 086108, 2007.
[4.11] J. S. C. Jang, S. R. Jian, D.J. Pan, Y. H. Wu, J. C. Huang, T. G. Nieh, “Thermal and mechanical characterizations of a Zr-based bulk metallic glass composite toughened by in-situ precipitated Ta-rich particles”, Intermetallics, Vol 18,p. 560, 2010.
[4.12] Z. F. Zhang, G. He, J. Eckert, L. Schultz, “Fracture mechanisms in bulk metallic glassy materials”, Phys. Rev. Lett., Vol 91, p. 0455051 , 2003.
[4.13] A. C. Lund, C. A. Schuh, “Yield surface of a simulated metallic glass”, Acta Mater., Vol 51,p. 5399, 2003.
[4.14] X. K. Xi, D. Q. Zhao, M. X. Pan, W. H. Wang, Y. Wu, J. J. Lewandowski, “Fracture of Brittle Metallic Glasses: Brittleness or Plasticity”, Phys. Rev. Lett., Vol 94, p. 125510, 2005.
[4.15] W. Zhang, Q. Zhang, A. Inoue, “Electrochemical properties and surface analysis of Cu–Zr–Ag–Al–Nb bulk metallic glasses” ,J. Alloys Comp., Vol 483, p. 112, 2009.
[4.16] D. C. Hofmann, J. Y. Suh, A. Wiest, G. Duan, M. L. Lind, M. D. Demetriou, W. L. Johnson, “Designing metallic glass matrix composites with high toughness and tensile ductility”, Nature, Vol 451-28, p. 1085, 2008.
[4.17] T.G. Nieh, J. Wadsworth, O.D. Sherby, Superplasticity in Metals and Ceramics, Cambridge University Press, 1997.
[4.18] C.L. Chiang, J.P. Chu, C.T. Lo, T.G. Nieh, Z.X. Wang, W.H. Wang, Intermetallics, Vol 12, p. 1057, 2004.
[4.19] J.S.C. Jang, C.F. Chang, Y.C. Huang, J.C. Huang, W.J. Chiang, C.T. Liu, Intermetallics, Vol 17, p.200, 2009.
[4.20] Q. Wang, D.K. Wang, T. Fu, J.J. Blandin, J.M. Pelletier, Y.D. Dong, J. Alloys Compd., Vol 495, p.50, 2010 .
[4.21] T.G. Nieh, T. Mukai, C.T. Liu, J. Wadsworth, Scripta Mater. Vol 40, p. 1021, 1999.
[4.22] J.P. Chu, C.L. Chiang, T. Mahalingam, T.G. Nieh, Scripta Mater. Vol 49, p. 435,2003.
[4.23] J. Schroers, Q. Pham, A. Desai, J. Microelectromech. Syst., Vol 16 p. 240,2007.
[4.24] P. Sharma, N. Kaushik, H. Kimura, Y. Saotome, A. Inoue, Nanotechnology , Vol 18 ,p. 035302, 2007.
[4.25] G. Kumar, H.X. Tang, J. Schroers, “Nanomoulding using thermoplastic forming with bulk metallic glass”, Nat. Lett., Vol 457, p.868, 2009.
[4.26] J. Schroers, Adv. Mater. Vol 21, p. 1, 2009.
[4.27] Jang JSC, Jian SR, Chang CF, Chang LJ, Huang YC, Li TH, et al. J Alloys Compd ;478:215, 2009.
[4.28] Jang JSC, Chang CF, Huang YC, Huang JC, Chiang WJ, Liu CT. Intermetallics ;17:200, 2009.
[4.29] Currey JD. J Exp Biol ;202:2495, 1999.
[4.30] Evans AG, Hutchinson JW, Ashby MF. Prog Mater Sci ;43:171, 1998.
[4.31] Meyers MA, Chen PY, Lin AYM, Seki Y. Prog Mater Sci ;53:1, 2008.
|