接枝PDMS之奈米氧化鋯及其與矽膠複合膜之光學性質

以作者查詢圖書館館藏

、以作者查詢臺灣博碩士

、以作者查詢全國書目

、勘誤回報

、線上人數：58

、訪客IP：18.191.202.48

姓名

鄭博元(Po-Yuan Cheng) 查詢紙本館藏

畢業系所

化學工程與材料工程學系

論文名稱

接枝PDMS之奈米氧化鋯及其與矽膠複合膜之光學性質
(PDMS grafted zirconia nanoparticle and its silicone composites for optical application)

相關論文

★ MFI沸石奈米結晶製備研究	★ 氧化鋅奈米粒子的表面改質與分散
★ 濕法製備氧化鋅摻雜鋁之透明導電膜	★ 強吸水性透明奈米沸石膜
★ 奈米氧化鋅透明導電膜的製作	★ 製作AZO透明導電膜的各種嘗試
★ 奈米結晶氧化鋯合成與分散	★ 奈米氧化鋯之表面接枝及其與壓克力樹酯複合膜之電泳沉積
★ 沸石晶核的製備與排列	★ 納米級氧化鋯結晶粒子之高濃度穩定懸浮液製備
★ 聚芳香羧酸酯之合成及性質研究	★ MFI沸石超微粒子之製作
★ 四氯化鈦之控制水解研究	★ 具環氧基矽烷包覆奈米粒子之研究
★ 具再分散性之奈米級氧化鋯結晶粒子之合成研究	★ 塑膠表面抗磨層之研究

檔案

[Endnote RIS 格式]

[Bibtex 格式]

[相關文章]

[文章引用]

[完整記錄]

[館藏目錄]

至系統瀏覽論文 ( 永不開放)

摘要(中)

本研究製備大小約為6nm之奈米氧化鋯結晶粉體，表面以葵酸進行接枝，再以不同分子量之silanol-terminated Poly(dimethyl siloxane) (PDMS)進行雙重接枝。經改質後所得之粉體能分散至大部分的非極性溶劑中。之後以熱重分析和液態磁核共振進行分析，透過計算，可估算兩種不同改質劑在奈米氧化鋯的接枝量。
經過葵酸與兩種不同分子量PDMS接枝之奈米粉體，其密度分別為2.49 g/cm3和2.34 g/cm3，粉體折射率為1.70和1.66。分散在甲苯中配成50wt%之溶膠後，在可見光波長600nm穿透度分別為11%和46%，配成60wt%則會分層。
然後我們成功製備氧化鋯/矽膠奈米複合材料並塗佈於玻璃基材上，其中接枝葵酸與44K分子量 PDMS之粉體，可與OE-6630矽膠均勻混合成製作成固含量為20wt% 膜厚為20m的複合材料膜，在可見光波長600nm下，具有約95%全穿透率和85%霧度值。

摘要(英)

In this study, cubic ZrO2 nanoparticles (~6 nm) were first prepared by the hot-alkaline digestion of zirconium carbonate. The particle surface was then capped by decanoic acid and further grafted with silanol-terminated poly(dimethyl siloxane) (PDMS) to make it dispersible in non-polar solvent. The ligand density on the nanoparticle was calculated with the help of H1-NMR and TGA analysis.
Two PDMS, with molecular weights of 18K and 44K respectively, were employed. The zirconia grafted with 18K PDMS lead to powder filler (ZD-18K) with an Archimedes density of 2.49 g/cm3 and a refractive index of 1.70. The numbers were 2.34 g/cm3 and 1.66, respectively, for that grafted with 44K PDMS (ZD-44K). Both types of filler could be dispersed in toluene at high loading. At a loading of 50 wt%, the dispersion containing the ZD-44K filler showed a spectral transmittance of 46 % (1 cm optical length @600nm). The one prepared with ZD-18K was less transparent, but still give a transmittance of 11%. Nevertheless, phase separation occurs for both systems when the loading increased to 60wt%.
These PDMS grafted fillers were then combined with a commercial silicone (OE-6630) to prepare nanocomposites which was coated on glass substrate for optical studies. A 20 m film could be prepared with the composite containing 20 wt% ZD-44K. It showed a total transmittance of ~95 % and a haze value of ~85% at a wavelength of 600nm.

關鍵字(中)

★ 氧化鋯
★ 聚二甲基矽氧烷

關鍵字(英)

論文目次

摘要 VI
Abstract VII
List of Figures X
List of Tables XII
Chapter1 Introduction 1
1-1 Background 1
1-2 Objectives 4
Chapter2 PDMS grafted ZrO2 nanoparticles 5
2-1 Chemical 5
2-2 Prepare of zirconia fillers and its surface modification 5
2-2-1 Preparation of zirconia nanocrystal 5
2-2-2 Capping with decanoic acid 6
2-2-3 PDMS surface modification 7
2-2-4 Instrument 8
2-3 Chemical structure of the modified zirconia surface 9
Chapter3 Filler properties and compatibility test 19
3-1 Filler property 19
3-1-1 Instruments 19
3-1-2 Powder density measurement 19
3-1-3 The dispersion of the modified zirconia 20
3-2 Compatibility with commercial silicone resins 28
3-2-1 Experiment 28
Chapter4 Characteristics of the composite 30
4-1 Introduction 30
4-2 Experiment 31
4-2-1 Prepare silicone composite 31
4-2-2 Instrument 31
4-3 Thermal stability 32
4-4 The transmittance and Haze value of composite 32
Chapter5 Conclusion 39
Reference 40

參考文獻

1. Tao, P.; Li, Y.; Rungta, A.; Viswanath, A.; Gao, J.; Benicewicz, B. C.; Siegel, R. W.; Schadler, L. S., TiO2 nanocomposites with high refractive index and transparency. Journal of Materials Chemistry 2011, 21 (46), 18623-18629.
2. 陳凱琪, 李巡天, 許嘉紋,林志浩, LED元件用高效能透明封裝材料技術趨勢(上). 工業材料雜誌 2007, 246, 162-165.
3. 陳凱琪, 李巡天, 許嘉紋,林志浩, LED元件用高效能透明封裝材料技術趨勢(下). 工業材料雜誌 2007, 247, 167-172.
4. 許嘉紋, 黃淑禎, 李巡天,林志浩,陳文彬, 高性能LED透明封裝材料發展趨勢. 工業材料雜誌 2011, 298, 77-84.
5. Kim, J.-S.; Yang, S.; Bae, B.-S., Thermal stability of sol–gel derived methacrylate oligosiloxane-based hybrids for LED encapsulants. J Sol-Gel Sci Technol 2010, 53 (2), 434-440.
6. Kim, W.-S.; Yoon, K. B.; Bae, B.-S., Nanopatterning of photonic crystals with a photocurable silica-titania organic-inorganic hybrid material by a UV-based nanoimprint technique. Journal of Materials Chemistry 2005, 15 (42), 4535-4539.
7. Eo, Y.-J.; Lee, T. H.; Kim, S. Y.; Kang, J. K.; Han, Y. S.; Bae, B.-S., Synthesis and molecular structure analysis of nano-sized methacryl-grafted polysiloxane resin for fabrication of nano hybrid materials. Journal of Polymer Science Part B: Polymer Physics 2005, 43 (7), 827-836.
8. Houbertz, R.; Domann, G.; Cronauer, C.; Schmitt, A.; Martin, H.; Park, J. U.; Fröhlich, L.; Buestrich, R.; Popall, M.; Streppel, U.; Dannberg, P.; Wächter, C.; Bräuer, A., Inorganic–organic hybrid materials for application in optical devices. Thin Solid Films 2003, 442 (1–2), 194-200.
9. Kim, Y. H.; Bae, J.-Y.; Jin, J.; Bae, B.-S., Sol–Gel Derived transparent zirconium-phenyl siloxane hybrid for robust high refractive index LED encapsulant. ACS Applied Materials & Interfaces 2014, 6 (5), 3115-3121.
10. 鐘寶堂, Synthesis of zirconia nanocomposite and its applications for light-emitting diode encapsulation material. 中央大學 2013.
11. Li, Y.; Tao, P.; Viswanath, A.; Benicewicz, B. C.; Schadler, L. S., Bimodal surface ligand engineering: The key to tunable nanocomposites. Langmuir 2012, 29 (4), 1211-1220.
12. Li, Y.; Tao, P.; Siegel, R. W.; Schadler, L. S., Multifunctional silicone nanocomposites for advanced LED encapsulation. MRS Online Proceedings Library 2013, 1547, 161-166.
13. Tao, P.; Li, Y.; Siegel, R. W.; Schadler, L. S., Transparent luminescent silicone nanocomposites filled with bimodal PDMS-brush-grafted CdSe quantum dots. Journal of Materials Chemistry C 2013, 1 (1), 86-94.
14. Dutta, N.; Egorov, S.; Green, D., Quantification of nanoparticle interactions in pure solvents and a concentrated PDMS solution as a function of solvent quality. Langmuir 2013, 29 (32), 9991-10000.
15. Ndong, R. S.; Russel, W. B., Rheology of surface-modified titania nanoparticles dispersed in PDMS melts: The significance of the power law. Journal of Rheology (1978-present) 2012, 56 (1), 27-43.
16. Green, D. L.; Mewis, J., Connecting the wetting and rheological behaviors of poly(dimethylsiloxane)-grafted silica spheres in poly(dimethylsiloxane) melts. Langmuir 2006, 22 (23), 9546-9553.
17. Dutta, N.; Green, D., Nanoparticle stability in semidilute and concentrated polymer solutions. Langmuir 2008, 24 (10), 5260-5269.
18. McEwan, M.; Green, D., Rheological impacts of particle softness on wetted polymer-grafted silica nanoparticles in polymer melts. Soft Matter 2009, 5 (8), 1705-1716.
19. 邱顯皓, High refractive index ZrO2/acrylic nanocomposite. 中央大學 2013.
20. 白謹通, Preparation of dispersible c-ZrO2 nanocrystals. 中央大學 2012.
21. Quemada, D., Rheology of concentrated disperse systems and minimum energy dissipation principle. Rheol Acta 1977, 16 (1), 82-94.
22. 謝志鐸, The Study of optical modeling of optical diffuser plate. 中央大學 2008.
23. 陳素梅, 擴散膜生產技術. 工業材料雜誌 2010, 282, 101-106.
24. Colombo, A.; Tassone, F.; Santolini, F.; Contiello, N.; Gambirasio, A.; Simonutti, R., Nanoparticle-doped large area PMMA plates with controlled optical diffusion. Journal of Materials Chemistry C 2013, 1 (16), 2927-2934.
25. Hu, J.; Zhou, Y.; He, M.; Yang, X., Novel multifunctional microspheres of polysiloxane@CeO2-PMMA: Optical properties and their application in optical diffusers. Optical Materials 2013, 36 (2), 271-277.
26. Hsin-Chu, C.; Kuo-Ju, C.; Chien-Chung, L.; Chao-Hsun, W.; Hau-Vei, H.; Hsin-Han, T.; Hsuan-Ting, K.; Shih-Hsuan, C.; Min-Hsiung, S.; Hao-Chung, K., Improvement in uniformity of emission by ZrO2 nano-particles for white LEDs. Nanotechnology 2012, 23 (26), 265201.

指導教授

蔣孝澈

審核日期

2014-10-27

推文