| 摘要(英) |
Semi-conductor play a very important role to contribute for Taiwan’s economics.There is a documentation pointed out that in 2014 the valued crated by semi-conductor field around two billion NT dollars which is almost 14% of Taiwan’s GDP. Excluded the IC design house, there is over one hunders semi-conductor company in Tainwan.
Due to the IC application could extend to commerical product and health care, thus importance and accurancy of the IC’s function testing is getting more and more important. Try to image that if the product of health care with the functional fail, it will become a how serious problem. Thus, the risk between the root cause and action or activities need to have a efficiency control plan. In order to enhance the competition of a complany and satisify the customer’s quality request and expectation, the continously risk assessment, preventation and prompt action is MUST DO.Through the tranditional FMEA’s analysis based on the semi-conductor’s IC testing and assembly house’s customer complaint data to apply into the Ford’s forth edition’s FMEA format and analysis. Collecting the Severity, Occurrence and Detection of each of the failure mode and use those data to calculate the RPN of each failure mode. However, the traditional FMEA can’t find out the relative between the input and output. Thus, this research use the DEA’s advantage analysis to sustibute the FMEA. Besides, throught the DEA and those data, it could find out the related improve ratio between each of the peers rather than FMEA.
Through the input and output’s related in DEA, it could provide the related ratio than FMEA. Sometimes the RPN in one FMEA may got the same value and would cause the company can’t descide how efficient to provide one resouce to improve the failure mode.
However, DEA could overcome such kind of problem in FMEA. This research could provide the company the continusouly improvement solution and stratgy. And also company could consider to enhance the system to be an automatically calculated system including the FMEA and DEA’s advantage. |
| 參考文獻 |
一、 中文部分
1.林凱偉，「製程危害管理系統之發展-以觸控面板製程為例」，國立中央大學環境工程研究所碩士論文，2014。
2.邱慧珍，「利用DEA改進FMECA於病人安全之醫療風險評估」，國立中央大學企業管理研究所碩士論文，2007。
3.孫國隆，「應用資料包絡分析法於失效模式與效應分析以增強評估能力之研究」 ，國立中央大學企業管理研究所博士論文，2009。
4.韓慧林、王貴民、王振陽、劉庭維、鄭曳庭，「應用失效模式與效應分析評估資訊安全管理系統之風險」，國防雜誌第二十六卷，第六期，頁107-122，2011。
二、英文部分
1.Banker, R. D., Charnes, A. and Cooper, W. W. (1984). “Some Models for Estimating Technical and Scale Inefficiencies in Data Envelopment Analysis,” Management Science, 30, 1078-1092.
2.Byrnes, P. and Freeman, M, (1999), Using DEA measures of efficiency and effectiveness in contractors performance fund allocation, Public Productivity & Management Review, 23(2), p210.
3.Charnes, A., Copper, W.W., and Rhodes, E., (1978), Measuring the efficiency of decision making units, European Journal of Operation Research, 2, p429-444.
4.Charnes, A., Cooper, W.W., Lewin, A.Y. and Seiford, L.M., (1994), Data Envelopment Analysis: Theory, Methodology and Applications, Kluwer Academic Publishers: Norwell, MA.
5.Cooper, W.W., Seiford, L.M. and Zhu, J., (2004), Handbook on data envelopment analysis, Kluwer Academic Publishers: Norwell, MA.
6.Cooper, W., L. Seiford and K. Tone (2007). Data envelopment analysis: a comprehensive text with models, applications, references and DEA-solver software, Springer Verlag.
7.Cooper, W.W., Seiford, L.W. and Tone, K., (2000), Data Envelopment Analysis: A comprehensive text with model, applications, references and DEA-Solver software, Kluwer Academic Publishers: Norwell, MA.
8.DaimlerChrsler Corporation, Ford Motor Company, General Motors Corporation, Potential Failure Mode and Effects Analysis Reference Manual (2001)
9.Färe, R., S. Grosskopf and R. Brännlund (1996). Intertemporal production frontiers: with dynamic DEA, Kluwer Academic Boston.
10.Farrell, J.M. (1957) ”The Measurement of Productive Efficiency,” Journal of the Royal Statistical Society vol. 120, pp. 253-281.
11.Ford Motor Company, Potential Failure Mode and Effects Analysis (FMEA) Reference Manual, 1988.
12.Tone, Kaoru (2001), “A Slacks-based Measure of Efficiency in Data Envelopment Analysis,” European Journal of Operational Research, 130 (3), 498-509.
13.Tone, K. and M. Tsutsui (2010). ”Dynamic DEA: A slacks-based measure approach,” Omega, 38(3-4), 145-156.
|
[Endnote RIS 格式]
[相關文章]
[文章引用]
[完整記錄]
[館藏目錄]
[檢視]
plurk
funp
live
udn
HD
myshare
netvibes
friend
youpush
delicious
baidu
Google bookmarks
del.icio.us
hemidemi
facebook
twitter
google
reddit