微型光學讀取頭之元件

以作者查詢圖書館館藏

、以作者查詢臺灣博碩士

、以作者查詢全國書目

、勘誤回報

、線上人數：57

、訪客IP：18.190.153.111

姓名

張育誠(Yu-Cheng Chang) 查詢紙本館藏

畢業系所

光電科學與工程學系

論文名稱

微型光學讀取頭之元件
(Optical Element of Micro-Optical Pickup Head)

相關論文

★ 富含矽奈米結構之氧化矽薄膜之成長與其特性研究	★ 導波共振光學元件應用於生物感測器之研究
★ 具平坦化側帶之超窄帶波導模態共振濾波器研究	★ 低溫成長鍺薄膜於單晶矽基板上之研究
★ 矽鍺薄膜及其應用於光偵測器之研製	★ 低溫製備磊晶鍺薄膜及矽基鍺光偵測器
★ 整合慣性感測元件之導波矽基光學平台研究	★ 矽基光偵測器研製與整合於光學波導系統
★ 光學滑鼠用之光學元件設計	★ 高效率口袋型LED 投影機之研究
★ 在波長為532nm時摻雜鉬之鈦酸鋇單晶性質研究	★ 極化繞射光學元件在高密度光學讀取頭上之應用研究
★ 不同溫度及波長之摻銠鈦酸鋇單晶性質研究	★ 經氣氛處理之鈦酸鋇單晶其光折變性質及電荷移轉與波長的關係
★ 在不同溫度時氣氛處理鈦酸鋇單晶性質之比較	★ 摻銠鈦酸鋇單晶的氧化還原與光折變性質

檔案

[Endnote RIS 格式]

[Bibtex 格式]

[相關文章]

[文章引用]

[完整記錄]

[館藏目錄]

[檢視]

[下載]

本電子論文使用權限為同意立即開放。
已達開放權限電子全文僅授權使用者為學術研究之目的，進行個人非營利性質之檢索、閱讀、列印。
請遵守中華民國著作權法之相關規定，切勿任意重製、散佈、改作、轉貼、播送，以免觸法。

摘要(中)

我們實驗主要將微光機電系統（Optical MEMS）之技術，應用在光學讀取頭上，製作出微光學元件，包含Grating、Hologram optical element（HOE）和Fresnel lens等等。
本論文主要將光學讀取頭微小化和積體化，且已創新的架構來執行。目前製作微光學元件的方式有很多種，其主要利用SiNx membrane和通道（Via）的基本結構，來縮小整體光學讀取頭；並在SiNx membrane上，利用乾式蝕刻製作微光學元件，是第一次嘗試，其光學效果與傳統光學元件相似。且利用半導體製程技術，可以做到數微米的線寬，因此可以多利用此方法，運用在不同的光學元件上。
另外，我們運用矽基板的晶格結構和濕式蝕刻的技術，蝕刻出45˚的反射鏡面，方便雷射二極體（LD）能夠順利的達到光碟片，且能順利由光接收器（PD）讀取正確的資料，以上的製作方式與光學模擬相符合，已證明可行性，日後的工作就是精確對準封裝的問題了。

摘要(英)

A new optical pickup head is introduced, with its optical components fabricated by the microoptoelectromechanical (MOEMS) technology. Optical elements, such as grating, holographic optical element and Fresnel lens, are made on the SiN membrane. The SiN film was deposited on the silicon wafer by low pressure chemical vapor deposition (LPCVD) or plasma enhanced chemical vapor deposition (PECVD). Its advantages include the high transmission efficiency, light weight, and easy packaging for this new proposed optical pickup head.

關鍵字(中)

★ 電漿輔助化學氣相沉積
★ 45°反射鏡面
★ 感應耦合電漿離子蝕刻
★ 氮化矽
★ 低壓化學氣相沉積
★ 全像光學元件
★ 氫氧化鉀

關鍵字(英)

★ HOE
★ KOH
★ 45° reflector
★ ICP
★ Silicon Nitride
★ LPCVD
★ PECVD

論文目次

論文摘要……………………………………………………………… Ⅰ
目錄…………………………………………………………………… Ⅱ
圖表索引……………………………………………………………… Ⅵ
第一章緒論………………………………………………………… 1
第二章光學讀取頭之微光學元件的介紹………………………… 7
2.1 光柵（Grating）…………………………………………… 7
2.2 全像光學元件（Holographic Optical Element，HOE）………8
2.3 Fresnel Lens………………………………………………… 10
2.4 設計微光學讀取頭………………………………………… 11
第三章 MEMCAD 模擬微光學元件之微架構……………………12
3-1 製程模擬…………………………………………………… 13
第四章微光學元件之製程設備……………………………………16
4.1 電漿的基本原理…………………………………………… 16
4.2 高密度電漿化學氣相沉積系統(PECVD)………………… 17
4.3 感應耦合電漿離子蝕刻（ICP）………………………… 19
第五章薄膜應力之簡介與特性……………………………………23
5-1 薄膜應力來源……………………………………………… 23
5-2 PECVD氮化矽薄膜介紹………………………………… 25
5-3 低應力氮化矽薄膜之實驗步驟…………………………… 29
5-4 殘留應力與沉積條件的關係……………………………… 30
5-4-1 SiH4（Silane）和NH3的流量比的影響…………… 31
5-4-2 RF功率的影響……………………………………… 32
5-4-3 基板溫度方面……………………………………… 33
5-4-4 反應室的壓力影響………………………………… 34
5-4-5 N2與Ar的影響……………………………………… 35
5-4-6 電極板距離的影響………………………………… 35
5-4-7 氦氣電漿（helium plasma）……………………………35
5-5 退火實驗方面……………………………………………… 36
5-6 PECVD氮化矽薄膜特性與濕乾式蝕刻方面………………38
5-7 沉積參數對折射率的影響………………………………… 39
第六章乾式蝕刻之高密度電漿蝕刻低應力氮化矽………………40
6-1 基本乾式蝕刻技術…………………………………………40
6-1-1 物理性蝕刻………………………………………… 40
6-1-2 化學性蝕刻………………………………………… 41
6-1-3 物理和化學混合蝕刻……………………………… 41
6-2 乾式蝕刻製程應用…………………………………………42
6-2-1 ASE製程…………………………………………… 43
6-3 高蝕刻率SiO2和SiNx………………………………………47
6-4 實驗參數……………………………………………………49
第七章濕式蝕刻於矽微加工之原理與應用………………………62
7-1 濕式蝕刻於矽體型微加工之原理…………………………62
7-2 矽晶格方向…………………………………………………64
7-3 非等向性蝕刻所用的蝕刻液………………………………66
7-4 利用濕式蝕刻製作45˚反射鏡面………………………… 70
7-4-1 以本身的（100）矽基板………………………………71
7-4-2 （100）矽基板有傾斜9.74˚……………………………77
7-5 降低蝕刻後的表面粗糙度………………………………… 79
7-6 設計LD和PD在Si bench相關位置………………………80
第八章微光學元件堆疊封裝………………………………………82
8-1 利用表面張力完成自動對準……………………………… 82
第九章光學讀取頭之微光學元件的製作…………………………86
9-1 製作簡介……………………………………………………86
9-2 元件製程步驟………………………………………………86
9-2-1 矽基板清洗………………………………………… 87
9-2-2 PECVD沉積SiNx薄膜………………………………88
9-2-3 微影（photolithography）………………………………88
9-2-4 蝕刻（etching）………………………………………91
9-2-5 去除光阻（remove photoresistor）……………………92
9-2-6 封裝（Package）………………………………………92
第十章微光學元件之量測與效果……………………………… 101
10-1 對光柵（Grating）作量測與效果…………………………101
10-2 對全像光學元件（HOE）作量測與效果…………………104
10-3 對Fresnel Lens作量測與效果………………………… 105
第十一章結論與心得…………………………………………… 107
第十二章參考文獻……………………………………………… 109

參考文獻

[1] R. M. Tiggelaar, T. T. Veenstra, R. G. P. Sanders, J. G. E. Gardeniers, M. C. Elwenspoek, A. Van and Berg, “A light detection cell to be used in a micro analysis system for ammonia”, 331-339, Talanta 56, 2002.
[2] Masayuki Sekimura, “Method for manufacturing a functional device by forming 45-degree surface on （100）silicon”, Patent No.：US 6,417,107 B1, Date of Patent：Jul. 9, 2002.
[3] Carola Strandman, Lars Rosengren, Hakan G. A. Elderstig, and Ylva Backlund, “Fabrication of 45˚ Mirrors Together with Well-define V-Grooves Using Wet Anisotropic Etching of Silicon”, Journal of Microelectromechanical system, Vol. 4, No. 4, 213 -219, December 1995.
[4] Irena Zubel, Malgorzata Kramkowska, “The effect alcohol additives on etching characteristics in KOH solutions”, Sensors and Actuators A 101, 225-261, 2002.
[5] Marc Madou, “Fundamentals of microfabrication”, CRC Press, “Wet Bulk Micromachining”, 145-215, 1997.
[6] Myung-Chan Jo, Sang-Kwon Park, Sang-Joon Park, “A study on resistance of PECVD silicon nitride thin film to thermal stress-induced cracking”, Applied Surface Science 140, 12-18, 1999.
[7] M. Orfert, K. Richter, “Plasma enhanced chemical vapor deposition of SiN-films for passivation of three-dimensional substrates”, Surface and Technology, 622-628, 1999.
[8] Jacqueline H. Hines, Donald C. Malocha, Kalpathy B. Sundaram, Kevin J. Casey, and Kwang R. Lee, “Deposition Parameter Studies and Surface Acoustic Wave Characterization of PECVD Silicon Nitride Films on Lithium Niobate”, IEEE, Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, VOL. 42, NO. 3, 397-403, May 1995.
[9] Klaus K. Schuegraf, “Handbook of Thin-Film Deposition Processes and Techniques”, Principles, Methods, Equipment and Applications, Noyes Publication, 124-126, 1988.
[10] Weast RC. CRC, “Handbook of Chemistry and Physics”, 76th edition. Boca Raton, FL: CRC Press, 1995-1996.
[11] G. Caliano, F. Galanello, A. Carotenuto, M. Pappalardo, V. Foglietti and N. Lamberti, “Micromachined Ultrasonic Transducers using Silicon Nitride Membrane Fabricated in PECVD Technology”, IEEE, 963-967, 2000.
[12] S. S. He and V. L. Shannon, Sharp Microelectronics Technology, “Hydrogen Diffusion and redistribution in PECVD Si-Rich Silicon Nitride during rapid Thermal Annealing”, Solid-State and Integrated Circuit Technology, 1995 4th International Conference on, 269 -271, 24-28 Oct 1995.
[13] Ronald M. Kubacki, “Low Temperature plasma Deposition of Silicon Nitride to Produce Ultra-Reliable, High Performance, Low Cost Sealed Chip-on-Board (SCOB) Assemblies”, IEEE, 273-280, 1994.
[14] M. Klanjesk Gunde, M. Macek, “The relationship between the macroscopic properties of PECVD silicon nitride and oxynitride layers and the characteristics of their networks”, Appl. Phys. A 74 181-186, 2002.
[15] J. Yta, M. Janani, L. E Camilletti, A. Kar-Roy, Q. Z. Liu, C. Nguyen, M. D. Woo, J. Hander, P. Van Cleemput, “Comparison between HDP CVD and PECVD Silicon Nitride for Advanced Interconnect Applications”, IEEE, 76-78, 2000.
[16] Tabata O., Kawahata K., Sugiyanma S. and Igarashi I., “Mechanical Property Measurements of Thin Films Using Load-Deflection of Composite Rectangular Membrane”, An Investigation of Micro Structures, Sensors, Actuators, Machines and Robots, Proceedings, pp.152-156, 1989.
[17] Gregory T. A. Kovacs, “Micromachined Transducers Sourcebook”, McGraw-Hill Companies, 81-83, 2000.
[18] K. J. Winchester and J. M. Dell, “Nano-Indentation Characterization of PECVD Silicon Films”, IEEE, 117-120, 2000.
[19] Tonya M. Klein, Ashfaqul I. Chowdhury, Henry H. Lamb, and Gregory N. Parsons, “Silicon Nitride PECVD at Low Temperature：Film Properties and Plasma Analysis”.
[20] Mohammad Aslam, Bruce E. Artz, Steven L. Kaberline, and Thomas J. Prater, “A Comparison of Cleaning Procedures for Removing Postassium from Wafer Exposed to KOH”, IEEE Transactions on electron device, VOL. 40, NO. 2, 1993.
[21] J. Bhardwaj, H. Ashraf, J. Hopkins, I. Johnston, S. McAuley, S. Hall, G. Nicholls, L. Atabo, A. Hynes, C. Welch, A. Barker, B. Gunn, L. Lea, E. Guibarra, S. Watcham, “Advances in High Rate Silicon and Oxide Etching using ICP”.
[22] Masafumi Ito, Kiyoshi Kamiya, Masaru Hori, and Toshio Goto, “Substrate reactions of Silicon nitride in a highly selective etching process of silicon oxide over silicon nitride”, JOURNAL OF APPLIED PHYSICS, VOLUME　91, NUMBER 5, 3452-3458, 2002.
[23] J. Kiihamaki, H. Kattelus, J. Karttunen, S. Franssila, “Depth and profile control in plasma etched MEMS structure”, Sensors and Actuators 82, 234-238, 2000.
[24] Kenji Tokoro, Daisuke Uchikawa, Mitsuhiro Shikida, and Kazuo Sato, “Anisotropic Etching Properties of Silicon in KOH and TMAH Solutions”, IEEE, 65-70, 1998.
[25] O. Tabata, “Anisotropy and Selectivity control of TMAH”, The 11th Int. Con. On Micro Electro Mechanical System (MEMS98), Heidelberg Germany, 229-233, 1998.
[26] J. T. Sheu, M. H. Chiang, S. Su, “Fabrication of intermediate mask for deep X-ray lithography”, Microsystem Technologies 4, 74-76, 1998.
[27] Rodica Iosub, Carmen Moldovan, M. Modreanu, “Silicon membranes fabrication by wet anisotropic etching”, Sensors and Actuators A 99, 104-111, 2002.
[28] Masayuki Sekimura, “Anisotropic etching of surfactant-added TMAH solution”, 12th IEEE International Conference on , Micro Electro Mechanical Systems, 1999. MEMS '99, 650-655, 1999.
[29] J. T. Sheu, K. S. You, C. H. Wu, and K. M. Chang, “Optimization of KOH Wet Etching Process in Silicon Nitride Nanofabrication”, IEEE-NANO, October 29, 213-217, 2001.
[30] Stephen F. Jacobs and Raymond K. Kostuk, “Some Experiment on Semiconductor Laser Characteristics”, IEEE Transactions on Education, VOL. 35, NO. 2, May, 1992.
[31] Meng-Yu Wu, Yi Chiu, Han-Ping Shieh, Wensyang Hsu, Hsueh-Liang Chou, “Fabrication of Planar integrated optical pick-up heads”, Optics and Photonics Taiwan’02, December 12-13, 415-417, 2002.
[32] R. Ramesham, C. D. Ellis, J. D. Olivas, S. Bolin, “Fabrication of diamond membrances for MEMS using reactive ion etching of silicon”, Thin Solid Films 330, 62-66, 1998.
[33] Stephen D. Senturia, “Microsystem Design”, KLUWER ACADEMIC PUBLISHERS, 61-65, 2001.

指導教授

張正陽(Jeng-Yang Chang)

審核日期

2003-7-7

推文