姓名 |
羅國平(Kuo-pin Lo)
查詢紙本館藏 |
畢業系所 |
高階主管企管碩士班 |
論文名稱 |
SMT在電子組裝業之發展與應用策略探討-以AA公司為例
|
相關論文 | |
檔案 |
[Endnote RIS 格式]
[Bibtex 格式]
[相關文章] [文章引用] [完整記錄] [館藏目錄] 至系統瀏覽論文 ( 永不開放)
|
摘要(中) |
在電子應用技術智慧化、多媒體化、網路化的發展趨勢下,SMT技術應運而生。隨著各學科領域的協調發展,SMT在90年代得到迅速發展和普及,並成為電子裝聯技術的主流。它不僅變革了傳統電子電路組裝的概念,其密度化,高速化,標準化等特點在電路組裝技術領域占了絕對的優勢。SMT對於推動當代資訊產業的發展起了重要的作用,並成為製造現代電子產品必不可少的技術之一。目前,它已經浸透到各個行業,各個領域,應用十分廣泛。
小批量、多品種生產是目前電子製造行業的一個突出特點,在這一生產模式下,產量的大幅變動、生產品種的頻繁調整,導致生產過程複雜多變,生產效率直線下降。如何才能提高SMT貼裝設備的生產效率是極待解決的一個難題,它要求新一代SMT設備要能夠完成快速新產品導入、快速換線,減少停機時間,並且實現對物料的管控和追蹤。
因此本論文以AA電子科技(江蘇)有限公司為個案研究對象,除了對SMT在整個電子組裝業的發展及應用的探討外,著重闡述了個案公司本身在SMT生產效益方面的三項改善因應對策--SMT生產設備汰舊換新策略、快速換線策略以及開發並實施防錯料系統策略。收集2013年至2014年之間整個汰舊換新效益數據,比較個案公司導入該三項方案前後之效益,分析得出效益成果,最後透過個案公司之成功經驗及實施成效,除了可以複製推廣到大陸其他廠區外,也可以針對大陸地區從事電子製造的台資企業提供解決方案,綜合成一條符合自身生產需求的SMT生產線,以獲得最佳的總體投資收益。
|
摘要(英) |
Under the trend of development of the intelligent electronic application technology, multimedia, network, SMT technology arises at the historic moment. With the coordinated development of various disciplines, SMT get rapid development and popularization in the 90s and became the mainstream of the technology of electronic assemblies. It not only changes the traditional concept of the electronic circuit assembly, but also its characteristics of density, high speed and standardization in circuit assembly technology accounts for an absolute advantage. SMT plays an important role in promoting the development of modern information industry and becomes one of the indispensable technologies of modern electronic products. At present, it has soaked into every industry and every field and been widely applied.
One prominent feature of the electronics manufacturing industry is small batch, various productions. In this production mode, sharply changes of production and frequent adjustment of the production varieties leads to complicated production process and plummet production efficiency. How to increase the productivity of the SMT equipment is a difficult problem to be solved. It requires a new generation of SMT equipment must be able to introduce new product fast, change the line fast, reduce downtime, and implement material control and tracking.
Therefore, this thesis research takes Askey electronics technology (Jiangsu) co., LTD. as the case study and emphatically expounds the case itself in the field of SMT production efficiency to improve coping strategies - SMT production equipment replacement strategy, Single Minute Exchange of Dies and Error Proof System, in addition to the development and application of SMT in the electronics assembly industry to explore. This paper collects the whole replacement data between 2013 and 2014 and compares this company’s efficiency before and after introducing the three strategies to arrive at the results of benefit. At last, according to the successful experience and implementation effectiveness of this company, in addition to other factory can copy to the mainland, it can also provide solutions based on engaged in the electronic manufacturing of Taiwan-owned enterprise on mainland area and integrate into a SMT production line that is can meet their own production requirements, in order to obtain the best overall return on investment.
|
關鍵字(中) |
★ 表面零件黏著技術 ★ 設備汰舊換新策略 ★ 快速換線策略 ★ 防錯料系統策略 |
關鍵字(英) |
★ Surface Mount Technology ★ Production Equipment Replacement Strategy ★ Single Minute Exchange of Dies Strategy ★ rror Proof System Strategy |
論文目次 |
目 錄
第一章 緒論 1
1-1研究背景 1
1-2 研究動機 2
1-3 研究目的 3
1-4研究架構 3
第二章 SMT之應用及發展趨勢 5
2-1 SMT技術的應用 5
2-1-1 SMT技術在現代通信設備上的應用 5
2-1-2 SMT技術在超標量處理器中的應用 5
2-1-3 SMT技術在航空航太上的應用 5
2-1-4 SMT技術在雷達設備上的應用 5
2-1-5 SMT技術在智慧斷路器上的應用 6
2-2 SMT技術的發展趨勢 6
2-2-1 SMT 生產線的發展 6
2-2-2 設備的發展 7
2-3小結 8
第三章 個案公司介紹 9
3-1個案公司簡介 9
3-2 個案公司SMT 線體之生產流程分析 10
第四章 案例研究 13
4-1個案公司所面臨之問題分析 13
4-2個案公司SMT改善項目實施過程與情形 16
4-3 設備汰舊換新之前後差異與效益比較 22
第五章 結論與建議 49
5-1 研究結論 49
5-2 研究建議 51
5-3 研究限制 52
參考文獻 53
|
參考文獻 |
中文部份:
[1] 王通成,「筆記型電腦廠製造流程分析:電路板組裝線」,清華大學工業工程與管理研究所碩士論文,2000。
[2] 宋永兆,“利用AOI和ICT來增加利潤”,SMT設備與PCB組裝測試設備雜誌,1998/1999。
[3] 林定皓,電子構裝技術概述,臺灣電路板協會,桃園,2010。
[4] 姚有峰,電子工藝實習教程,中國科學技術大學出版社,2011。
[5] 郭堃疄,運用六標準差之手法應用於 SMT 製程品質改善之研究,國立勤益科大學研發科技與資訊管理研究所碩士論文,2012。
[6] 黃庭瑋,應用群集分析方法縮短SMT換線時間-以研華科技為例,台北科技大學工業工程與管理研究所碩士論文,2006。
[7] 陳鑫,SMT工藝技術介紹與展望,工業設計,2011,第08期,P21-P23。
[8] 電子技術編輯群編,“表面黏著技術”,電子技術出版社,1994。
[9] 劉慧芬,「雙機分工模式下多樣PCB類型製造時間最佳化問題之研究」,元智大學工業工程與管理研究所碩士論文,2002。
[10] 龍緒明,電子錶面組裝技術,電子工業出版社,2008。
[11] 易展電子網,“SMT工藝創新促使SMT設備(貼片機)更新” 擷取日期: 2014年08月15日 http://www.dz-z.com/share_news/588256.html
[12] 百度百科,“SMT”,擷取日期: 2014年05月11日http://baike.baidu.com/view/10599.htm?fr=aladdin
|
指導教授 |
黃同圳、何應欽(Tung-Chun Huang
Ying-Chin Ho)
|
審核日期 |
2015-6-23 |
推文 |
facebook plurk twitter funp google live udn HD myshare reddit netvibes friend youpush delicious baidu
|
網路書籤 |
Google bookmarks del.icio.us hemidemi myshare
|