參考文獻 |
[1]Roeder, C. W., “Overview of Hybrid and Composite Systems for Seismic Design in the United-States”, Engineering Structures, Vol. 20, Iss. 4 , pp. 355-363, 1998.
[2]Subcommitte on the State-of-the-Art Survey of the Task Committee on Composite Construction , “Composite Steel-Concrete Construction”, Journal of Structural Division-ASCE, Vol. 100, Iss. ST5, pp. 1085-1139, 1974.
[3]Azizinamini, A., and Ghosh, S. K., “Steel Reinforced Concrete Structures in 1995 Hyogoken-Nanbu Earthquake”, Journal of Structural Engineering-ASCE, Vol. 123, Iss. 8, pp. 986-992., 1997
[4]IABSE Joint Committee, “Draft Model Code for Composite Structures”, 1979.
[5]Eurocode4 ,“Design of Composite Structures”,1990.
[6]內政部營建署. 鋼骨鋼筋混凝土設計規範與解說, 台北, 2004.
[7]American Concrete Institute (ACI). (2002), Buildings Code Requirements for Structural Concrete (ACI 318-02) and Commentary (ACI 318R-02). Farmington Hills, Michigan.
[8]AISC. Load and Resistance Factor Design Specification for Structural Steel Buildings, Chicago, 1999.
[9]翁正強、江銘鴻、顏聖益. “包覆型SRC梁剪力握裹破壞試驗與力學行為研究”, 中國土木水利工程學刊, Vol. 13, Iss. 3, pp. 555-565, 2001.
[10]陳正誠、陳建中. “包覆型鋼骨鋼筋混凝土梁之撓曲行特性”, 中國土木水利工程學刊, Vol. 13, Iss. 2, pp. 263-275, 2001.
[11]Hsu, H. L., and Wang, C. L., “Flexural-Torsional Behaviour of Steel Reinforced Concrete Members Subjected to Repeated Loading”, Earthquake Engineering & Structural Dynamics, Vol. 29, Iss. 5, pp. 667-682, 2000.
[12]許協隆、李建輝. “腹版開孔之鋼骨鋼筋混凝土梁反覆載重試驗研究”, 中國土木水利工程學刊, Vol. 14, Iss. 4, pp. 581-590, 2002.
[13]Ricles, J. M., and Paboojian, S. D., “Seismic Performance of Steel-Encased Composite Columns”, Journal of Structural Engineering-ASCE, Vol. 120, Iss. 8, pp. 2474-2494, 1994.
[14]翁正強、江銘鴻、陳誠直、林佳宏. “剪力釘對包覆型SRC梁力學行為之影響”, 中國土木水利工程學刊, Vol. 13, Iss. 1, pp. 181-192, 2001.
[15]Mirza, S. A., Hyttinen, V., and Hyttinen, E., “Physical Tests and Analyses of Composite Steel-Concrete Beam-Columns”, Journal Of Structural Engineering-ASCE, Vol. 122, Iss. 11, pp. 1317-1326, 1996.
[16]AIJ, “Standards for Structural Calculation of Steel Reinforced Concrete Structures.”, Architectural Institute of Japan, Tokyo, 1987.
[17]Park, R., and Paulay, T., “Reinforced concrete structures”, John&Wiley, NY.,1975.
[18]Johnson, R. P., and Anderson, D., “En1994 Eurocode 4: Design of Composite Steel and Concrete Structures”, Proceedings of the Institution of Civil Engineers-Civil Engineering, Vol. 144, Iss., pp. 33-38, 2001.
[19]Viest, I. M., “Review of Research on Composite Steel-Concrete Beams”, Journal of Structural Division-ASCE, Vol. 86, Iss. ST6, pp. 1-21, 1960.
[20]Furlong, R. W., “Design of Steel-Encased Concrete Beam-Columns”, Journal of Structural Division-ASCE, Vol. 94, Iss. ST1, pp. 267-281, 1968.
[21]Johnson, P. R., “Research on Steel-Concrete Composite Beams”, Journal of Structural Division-ASCE, Vol. 96, Iss. ST3, pp. 445-459, 1970.
[22]Weng, C. C., Yen, S. I., and Chen, C. C., “Shear-Strength of Concrete-Encased Composite Structural Members”, Journal of Structural Engineering-ASCE, Vol. 127, Iss. 10, pp. 1190-1197, 2001.
[23]Weng, C. C., Yen, S. I., and Jiang, M. H., “Experimental Study on Shear Splitting Failure of Full-Scale Composite Concrete Encased Steel Beams”, Journal of Structural Engineering-ASCE, Vol. 128, Iss. 9, pp. 1186-1194, 2002.
[24]翁正強、顏聖益、陳誠直、黃明慧. “包覆型鋼骨鋼筋混凝土梁之極限彎矩強度研究”, 中國土木水利工程學刊, Vol. 12, Iss. 3, pp. 521-531, 2000.
[25]翁正強、廖慧明、張荻薇、陳誠直、顏聖益. “鋼骨鋼筋混凝土建築之梁柱構造細則研究”, 土木工程技術, Vol. 2, Iss. 4, pp. 1, 1998.
[26]翁正強、江銘鴻、顏聖益. “鋼骨鋼筋混凝土(SRC)梁抗彎試驗與力學特性”, 土木水利, Vol. 13 卷 2 期 頁 249, Iss., 2001.
[27]Eltawil, S., and Deierlein, G. G., “Strength and Ductility of Concrete Encased Composite Columns”, Journal of Structural Engineering-ASCE, Vol. 125, Iss. 9, pp. 1009-1019, 1999.
[28]Morino, S., “Recent Developments in Hybrid Structures in Japan - Research, Design and Construction”, Engineering Structures, Vol. 20, Iss. 4, pp. 336-346., 1998
[29]陳正誠、張大鵬、方至楷. “鋼骨鋼筋混凝土短梁之剪力實驗行為”, 中國土木水利工程學刊, Vol. 12 卷 3 期 頁 511, Iss., 2000.
[30]陳誠直、黃世欽. “高強度鋼骨鋼筋混凝土樑柱行為研究”, 工程科技通訊, Vol. 20 期, Iss., pp. 頁 32,
[31]陳生金、陳昭榮、朱俊星. “半預鑄鋼骨鋼筋混凝土梁柱接頭研究”, 結構工程, Vol. 17, Iss. 1, pp. 3, 2002.
[32]林聰悟、王承順、秦志中. “鋼骨鋼筋混凝土撓曲強度設計之探討”, 結構工程, Vol. 12, Iss. 1, pp. 13, 1997.
[33]Boyd, P. F., Cofer, W. F., and McLean, D. I., “Seismic Performance of Steel-Encased Concrete Columns under Flexural Loading”, ACI Structural Journal, Vol. 92, Iss. 3, pp. 355-364, 1995.
[34]Chen, C. C., Li, J. M., and Weng, C. C., “Experimental Behaviour and Strength of Concrete-Encased Composite Beam-Columns with T-Shaped Steel Section under Cyclic Loading”, Journal Of Constructional Steel Research, Vol. 61, Iss. 7, pp. 863-881, 2005.
[35]Sapountzakis, E. J., and Katsikadelis, J. T., “Interface Forces in Composite Steel-Concrete Structure”, International Journal of Solids and Structures, Vol. 37, Iss. 32, pp. 4455-4472, 2000.
[36]Seracino, R., Oehlers, D. J., and Yeo, M. F., “Partial-Interaction Flexural Stresses in Composite Steel and Concrete Bridge Beams”, Engineering Structures, Vol. 23, Iss. 9, pp. 1186-1193, 2001.
[37]Subedi, N. K., and Coyle, N. R., “Improving the Strength of Fully Composite Steel-Concrete-Steel Beam Elements by Increased Surface Roughness - an Experimental Study”, Engineering Structures, Vol. 24, Iss. 10, pp. 1349-1355, 2002.
[38]Faella, C., Martinelli, E., and Nigro, E., “Steel and Concrete Composite Beams with Flexible Shear Connection: “Exact” Analytical Expression of the Stiffness Matrix and Applications”, Computers & Structures, Vol. 80, Iss. 11, pp. 1001-1009, 2002.
[39]Bryson, J. O., and Mathey, R. G., “Surface Condition Effect on Bond Strength of Steel Beams Embedded in Concrete”, Journal of the American Concrete Institute, Vol. 59, Iss. 3, pp. 397-405, 1962.
[40]Soh, C. K., Chiew, S. P., and Dong, Y. X., “Damage Model for Concrete-Steel Interface”, Journal Of Engineering Mechanics Asce, Vol. 125, Iss. 8, pp. 979-983, 1999.
[41]Roeder, C. W., Chmielowski, R., and Brown, C. B., “Shear Connector Requirements for Embedded Steel Sections”, Journal of Structural Engineering-ASCE, Vol. 125, Iss. 2, pp. 142-151, 1999.
[42]Roeder, C. W., Cameron, B., and Brown, C. B., “Composite Action in Concrete Filled Tubes”, Journal of Structural Engineering-ASCE, Vol. 125, Iss. 5, pp. 477-484, 1999.
[43]Spacone, E., and El-Tawil, S., “Nonlinear Analysis of Steel-Concrete Composite Structures: State of the Art”, Journal Of Structural Engineering-ASCE, Vol. 130, Iss. 2, pp. 159-168, 2004.
[44]Johansson, M., and Gylltoft, K., “Mechanical Behavior of Circular Steel-Concrete Composite Stub Columns”, Journal of Structural Engineering-ASCE, Vol. 128, Iss. 8, pp. 1073-1081, 2002.
[45]Aval, S. B. B., Saadeghvaziri, M. A., and Golafshani, A. A., “Comprehensive Composite Inelastic Fiber Element for Cyclic Analysis of Concrete-Filled Steel Tube Columns”, Journal of Engineering Mechanics-ASCE, Vol. 128, Iss. 4, pp. 428-437, 2002.
[46]Sivaselvan, M. V., and Reinhorn, A. M., “Hysteretic Models for Cyclic Behavior of Deteriorationg Inelastic Structures.” MCEER-99-0018, State University of New York at Buffalo, 1999.
[47]Clough, R. W. , “Effect of Stiffness Degradation on Earthquake Ductility Requirement”, Report No. 6614, Structural and Material Research, University of California, Berkeley, 1966.
[48]Takeda, T., A., S. M., and Nielsen, N. N., “Reinforced Concrete Response to Simulated Earthquake”, Journal of Structural Division-ASCE, Vol. 96, Iss. ST-12, pp. 2557-2573, 1970.
[49]Park, Y. J., Reinhorn, A. M., and Kunnath, S. K., “IDARC:Inelastic Damage Analysis of Reifnroced Concrete Frame - Shear-Wall Structures.” NCEER-87-0008, State University of New York at Buffalo, 1987.
[50]Bouc, R. “Forced Vibration of Mechanical Systems with Hysteretic”, Proceedings of the 4th Conference on Non-linear Oscillations, Prague, 1976.
[51]Wen, Y. K. “Methoc of Random Vibration of Hysteretic Systems”, Journal of the Engineering Mechanics Division-ASCE, Vol. 102, Iss. EM-02, pp. 249-263, 1976
[52]Yalcin, C., and Saatcioglu, M., “Inelastic Analysis of Reinforced-Concrete Columns”, Computers & Structures, Vol. 77, Iss. 5, pp. 539-555, 2000.
[53]Kwak, H. G., and Kim, S. P., “Bond-Slip Behavior Under Monotonic Uniaxial Loads.” Engineering Structures, Vol. 23, Iss. 3, pp. 298-309, 2001.
[54]Kwak, H. G., and Kim, S. P., “Cyclic Moment-Curvature Relation of an RC Beam”, Magazine of Concrete Research, Vol. 54, Iss. 6, pp. 435-447, 2002.
[55]Kwak, H. G., and Kim, S. P., “Monotonic Moment-Curvature Relation of an RC Beam”, Magazine of Concrete Research, Vol. 54, Iss. 6, pp. 423-434, 2002.
[56]Kwak, H. G., and Kim, S. P., “Nonlinear Analysis of RC Beams Based on Moment-Curvature Relation”, Computers & Structures, Vol. 80, Iss. 7-8, pp. 615-628, 2002.
[57]Kwak, H. G., and Kim, S. P., “Nonlinear Analysis of RC Beams Based on Moment-Curvature Relation”, Computers & Structures, Vol. 80, Iss. 7-8, pp. 615-628, 2002.
[58]Kwan, W. P., and Billington, S. L., “Simulation of Structural Concrete under Cyclic Load”, Journal of Structural Engineering-ASCE, Vol. 127, Iss. 12, pp. 1391-1401, 2001.
[59]Spacone, E., Filippou, F. C., and Taucer, F. F., “Fibre Beam-Column Model for Non-Linear Analysis of R/C Frames.1. Formulation”, Earthquake Engineering & Structural Dynamics, Vol. 25, Iss. 7, pp. 711-725, 1996.
[60]Spacone, E., Filippou, F. C., and Taucer, F. F., “Fibre Beam-Column Model for Non-Linear Analysis of R/C Frames.2. Applications”, Earthquake Engineering & Structural Dynamics, Vol. 25, Iss. 7, pp. 727-742, 1996.
[61]Miramontes, D., Merabet, O., and Reynouard, J. M., “Beam Global-Model for the Seismic Analysis of RC Frames”, Earthquake Engineering & Structural Dynamics, Vol. 25, Iss. 7, pp. 671-688, 1996.
[62]Roufaiel, M. S. L., and Meyer, C., “Analytical Modeling of Hysteretic Behavior of R/C Frames”, Journal of Structural Engineering-ASCE, Vol. 113, Iss. 3, pp. 429-444, 1987.
[63]Chung, Y. S., Meyer, C., and Shinozuka, M., “Modeling of Concrete Damage”, ACI Structural Journal, Vol. 86, Iss. 3, pp. 259-271, 1989.
[64]Foliente, G. C., “Hysteresis Modeling of Wood Joints and Structural Systems”, Journal of Structural Engineering-ASCE, Vol. 121, Iss. 6, pp. 1013-1022, 1995.
[65]Chai, Y. H., Romstad, K. M., and Bird, S. M., “Energy-Based Linear Damage Model for High-Intensity Seismic Loading”, Journal of Structural Engineering-ASCE, Vol. 121, Iss. 5, pp. 857-864, 1995.
[66]Kumar, S., and Usami, T., “An Evolutionary-Degrading Hysteretic Model for Thin-Walled Steel Structures”, Engineering Structures, Vol. 18, Iss. 7, pp. 504-514, 1996.
[67]Gulkan, P., and Sozen, A., “Inelastic Response of Reinforced Concrete Structures to Earthquake Motions”, ACI Journal, Vol. 71, Iss. 12, pp. 604-610, 1974.
[68]Powell, G. H., “Supplement to Computer Program DRAIN-2D,” Suplement to Report, DRAIN-2D User’s Guild, University of California, Berkeley, 1975.
[69]Amde, A. M., and Mirmiran, A., “A New Hysteresis Model for Steel Members”, International Journal for Numerical Methods in Engineering, Vol. 45, Iss. 8, pp. 1007-1023, 1999.
[70]Mostaghel, N., and Byrd, R. A., “Inversion of Ramberg-Osgood Equation and Description of Hysteresis Loops”, International Journal of Non-Linear Mechanics, Vol. 37, Iss. 8, pp. 1319-1335, 2002.
[71]Lee, T. K., and Pan, A. D. E., “Analysis of Composite Beam-Columns under Lateral Cyclic Loading”, Journal of Structural Engineering-ASCE, Vol. 127, Iss. 2, pp. 186-193, 2001.
[72]Park, Y. J., and Ang, A. H. S., "Mechanistic Seismic Damage Model for Reinforced-Concrete", Journal of Structural Engineering-ASCE, Vol. 111, Iss. 4, pp. 722-739, 1985.
[73]Kunnath, S. K., Reinhorn, A. M., and Park, Y. J., "Analytical Modeling of Inelastic Seismic Response of R/C Structures", Journal of Structural Engineering-ASCE, Vol. 116, Iss. 4, pp. 996-1017, 1990.
[74]Chang, G. A., and Mander, J. B., "Seismic Engergy Based Fatigue Damage Analysis of Bridge Columns: Part I Evaluation of Seismic Capacity." NCEER-94-0006, State University of New York at Buffalo, 1994.
[75]Bruneau, M., Uang, C. M. and Whittaker A., “Ductile Design of Steel Structures”, McGraw-Hill, NY., 1998.
[76]Paulay, T., and Priestley, M. J. N., Seismic Design of Reinforced Concrete and Masonry Buildings, John&Wiley, New York, 1992.
[77]Chen, W. F. and Atsuta, T., “Theory of Beam-Columns Volumn1:In-Plane Behavior and Design”, McGRAW-Hill, NY., 1977.
[78]Chen, W. F. and Atsuta, T., “Theory of Beam-Columns Volumn2: Space behavior and Design”, McGRAW-Hill, NY., 1977.
[79]Valles, R. E., Reinhorn, A. M., Kunnath, S. K., and Madan, A., “IDARC2D Version 4.0: A Computer Program for the Inelastic Damage Analysis of Buildings.” NCEER-96-0010, State University of New York at Buffalo, 1996.
[80]Kunnath, S. K., Reinhorn, A. M., and Lobo, R. F., “IDARC Version 3.0: A Program for the Inelastic Damage Analysis of Reinforced Concrete Structures.” NCEER-92-3115B, State University of New York at Buffalo, 1992.
[81]Dowell, R. K., Seible, F., and Wilson, E. L., “Pivot Hysteresis Model for Reinforced Concrete Members”, ACI Structural Journal, Vol. 95, Iss. 5, pp. 607-617, 1998.
[82]Cheng, F. Y., “Matrix Analysis of Structural Dynamics: Applications and Earthquake Engineering”, New York, 2003.
[83]Chopra, A. K., “Dynamics of Structures: Theory and Applications to Earthquake Engineering 2nd Edition”, New Jersey, 2001.
[84]Kowalsky, M. J. , Priestley, M. J. N. and Macrae, G. A., “Displacement-Based Design : A Methodology for Seismic Design Applied to Single Degree of Freedom Reinforced Concrete Structures”, Report SSPR 94/16, University of California, San Diego, 1994
[85]Priestley, M. J. N., Seible, F., and Calvi, G. M., “Seismic Design and Retrofit of Bridges”, Jonh Wiley & Sons, New York, 1996.
[86]范立礎、卓衛東,“橋梁延性抗震設計”,人民交通出版社,北京,2001。
[87]Amde, A. M., and Mirmiran, A., “A New Hysteresis Model for Steel Members”, International Journal for Numerical Methods in Engineering, Vol. 45, Iss. 8, pp. 1007-1023, 1999.
[88]Lee, L. H., Han, S. W., and Oh, Y. H., “Determination of Ductility Factor Considering Different Hysteretic Models”, Earthquake Engineering & Structural Dynamics, Vol. 28, Iss. 9, pp. 957-977, 1999.
[89]Monti, G., and Spacone, E., “Reinforced Concrete Fiber Beam Element with Bond-Slip”, Journal of Structural Engineering-ASCE, Vol. 126, Iss. 6, pp. 654-661, 2000.
[90]Sivaselvan, M. V., and Reinhorn, A. M., “Hysteretic Models for Deteriorating Inelastic Structures”, Journal of Engineering Mechanics-ASCE, Vol. 126, Iss. 6, pp. 633-640, 2000.
[91]Liu, Q., Kasai, A., and Usami, T., “Two Hysteretic Models for Thin-Walled Pipe-Section Steel Bridge Piers”, Engineering Structures, Vol. 23, Iss. 2, pp. 186-197, 2001.
[92]Mostaghel, N., and Byrd, R. A., “Inversion of Ramberg-Osgood Equation and Description of Hysteresis Loops”, International Journal of Non-Linear Mechanics, Vol. 37, Iss. 8, pp. 1319-1335, 2002.
[93]Girard, C., and Bastien, J., “Finite-Element Bond-Slip Model for Concrete Columns under Cyclic Loads”, Journal of Structural Engineering-ASCE, Vol. 128, Iss. 12, pp. 1502-1510, 2002.
[94]Saatcioglu, M., and Razvi, S. R., “Strength and Ductility of Confined Concrete”, Journal of Structural Engineering-ASCE, Vol. 118, Iss. 6, pp. 1590-1607, 1992.
[95]Chai, Y. H., Romstad, K. M., and Bird, S. M., “Energy-Based Linear Damage Model for High-Intensity Seismic Loading”, Journal of Structural Engineering-ASCE, Vol. 121, Iss. 5, pp. 857-864, 1995.
[96]Williams, M. S. and Sexsmith, R. G., “Seismic Damage Indices for Concrete Structures: A State-of-the-Are Revies,” Earthquake Spectra, Vol. 11, Iss. 2 , pp. 319-349, 1995.
[97]Williams, M. S., and Sexsmith, R. G., “Seismic Assessment of Concrete Bridges Using Inelastic Damage Analysis”, Engineering Structures, Vol. 19, Iss. 3, pp. 208-216, 1997.
[98]Mehanny, S. S. F., and Deierlein, G. G., “Seismic Damage and Collapse Assessment of Composite Moment Frames”, Journal of Structural Engineering-ASCE, Vol. 127, Iss. 9, pp. 1045-1053, 2001.
[99]Bozorgnia, Y., and Bertero, V. V., “Damage Spectra: Characteristics and Applications to Seismic Risk Reduction”, Journal of Structural Engineering-ASCE, Vol. 129, Iss. 10, pp. 1330-1340, 2003.
[100]Farrow, K. T., and Kurama, Y. C., “SDOF Demand Index Relationships for Performance-Based Seismic Design”, Earthquake Spectra, Vol. 19, Iss. 4, pp. 799-838, 2003.
[101]Li, Q. W., and Ellingwood, B. R., “Structural Response and Damage Assessment by Enhanced Uncoupled Modal Response History Analysis”, Journal of Earthquake Engineering, Vol. 9, Iss. 5, pp. 719-737, 2005. |