參考文獻 |
[1] J. Minowa and Y. Fujii, “Subnanometer bandwidth interference filter for optical fiber communication systems”, Appl. Opt., 27, pp.1385-1386, 1988.
[2] H. Takashashi, “Temperature stability of thin-film narrow-bandpass filters produced by ion-assisted deposition”, SPIE Vol. 2253, pp. 1343-1353, 1994.
[3] H. Takashashi, “Temperature stability of thin-film narrow-bandpass filters produced by ion-assisted deposition”, Appl. Opt., 34, pp. 667-675, 1995.
[4] A. Zoller, R. Gotzelmann, K. Matl, and D. Cushing, “Temperature-stable bandpass filters deposited with plasma ion-assisted deposition”, Appl. Opt., 35, pp. 5609-5612, 1996.
[5] A. Zoller, R. Gotzelmann, and K. Matl, “Shift free interference coatings deposited with plasma ion assisted deposition”, presented at the OIC 95, Tucson, Arizona, 1995.
[6] “Generic Requirements for Fiber Optics Branching Components”, Bellcore GR-1209-CORE, Issue 2, February 1998.
[7] R. W. Hoffman, in Physics of Thin Films, Vol. 3, Academic Press: New York, p.211, 1966.
[8] 李正中, “薄膜光學與鍍膜技術” ,第五版, 藝軒圖書出版社, p.214-231,(2006).
[9] 朱正煒, “DWDM干涉濾光片之設計及製作”,光學工程第六十八期, 88年12月, P.40-45.
[10] R. W. Hoffman, in physics of nonmetallic Thin Films, edited by C. H. S.Dupuy and A. Cachard, Plenum Press: New York, p.273, 1976.
[11] K. L. Chopra, Mechanical effects in thin films, in Thin Film Phenomena, p.266, McGRAW -HILL: New York, 1969.
[12] G. Gore, “On the Properties of Electro-deposited Antimony”, Trans. Roy.Soc. (London), Part 1, p.185, 1858.
[13] E. J. Mills, “On Electrostriction”, Proc. Roy. Soc, 26, p.504, 1877.
[14] G. G. Stoney. “The tension of metallic films deposited by electrolysis”, Proc.Roy. Soc., A82, pp.172-175, 1909.
[15] K. G. Soderberg and A. K. Graham, “Stress in electro-deposits –Its significance”, Proc. Am. Electroplater’s Soc., 34, p.97, 1947.
[16] R. H. D. Barklie and H. J. Davies, “The effect of surface conditions and electrodeposited metal on the resistance of materials to repated stress”, Proc. Inst. Mech. Eng.,p.2731,1930.
[17] C.E. Heussner, A. R. Balden, and L. M. Morse, “Stress Data on Copper Deposits from Alkaline Baths”, Plating ,35, p.719, 1948.
[18] A. Brenner and S. Senderoff, “Calculation of stress in electrodeposits from the curvature of a plated strip “, J. Research of the Nat’l. Bureau of U. S. Standards, 42 (Research paper RP1954), pp. 105-123, 1949.
[19] N. N. Davidenkov, “Measurement of residual stress in electrolytic deposits”, Sov. Phys., 2, pp.1595-1598, 1961.
[20] C. H. Hsueh and A. G. Evans, “Residual Stresses in Metal/Ceramic Bonded Strips”, J. Am. Ceram. Soc., 68, pp.241-248, 1985.
[21] P. H. Townsend and D. M. Barnett, “Elastic relationships in layered composite media with approximation for the case of thin films on a thick substrate”, J. Appl. Phys. 62, pp.4438-4444, 1987.
[22] Claude A. Klein, “How accurate are Stoney’s eqution and recent modifications”, J. Appl. Phys. 88, pp. 5487-5489, 2000.
[23] C. H. Hsueh, “Modeling of elastic deformation of multilayer due to residual stresses and external bending”, J. Appl. Phys. 91, pp.9652-9656, 2002.
[24] N. H. Zhang and J. J. Xing, “An alternative model for elastic bending deformation of multilayered beams”, J. Appl. Phys. 100, pp. 103519, 2006.
[25] J. Jiang, J. J. Pan, J. Guo and G. Keiser, “Model for Analyzing Manufacturing-Induced Internal Stresses in 50-GHz DWDM Multilayer Thin-Film Filters and Evaluation of Their Effects on Optical Performances” J. Lightwave. Tech. 23, pp.495-503, 2005.
[26] C. Wang and Q. Ren, “Influence of stress on the transmission characteristics of multilayer thin films”, Appl. Opt. 45, pp.7858-7862, 2006.
[27] S. H. Kim and C. K. Hwangbo, “Derivation of the center-wavelength shift of narrow-bandpass filters under temperature change”, Opt. Exp. 12, pp.5634-5639, 2004.
[28] Steven L. Prins, Alan C. Barron, William C. Herrmann, John R. McNeil, “Effect of stress on performance of dense wavelength division multiplexing filters: optical properties”, Appl. Opt.43, 626-632(2004).
[29] Vittorio Bertogalli,E.U. Wagemann,EMMERICH Müller,Edgar Leckel, “Testing passive DWDM components:uncertainties in swept-wavelength measurement system”,OFC 2000.
[30] Paul J. Caber, Stephen J. Martinek, Robert J.Neimann, “A new interferometric profiler for smooth and rough surfaces”, WYKO Corporation 2650 E. Elvira Road Tucson,AZ 857 |