參考文獻 |
[1] M. C. WU, “Micromachining for Optical and Optoelectronic Systems”, IEEE, 85, NO.11, 1997.
[2] B. Morgan, J. Krizmanic, and R. Ghodssi. “Development of a deep silicon phase Fresnel lens Using gray-scale lithography and deep reactive ion etching”, Micromechanics and Microengineering, 13, 2004.
[3] Nussbaumyx, R Volkely, H. P. Herzigy,Design, M. Eisnerz and S. Haselbeckz, “Design, Fabrication and testing of microlens arrays for Sensors and Microsystems”, APPLIED OPTICS, 6, 617-636, 1997.
[4] M. E. Motamedi, “MOEMS”, SPIE, January 2005.
[5] D. C. O’Shea, T. J. Suleski, A. D. Kathman, D. W. Prather, “Diffractive Optics: Design Fabrication, and Test”, SPIE, June 2003.
[6] Z. D. Popovic, R. A. Sprague, and G. A. N. Connell, “Technique for monolithic fabrication of microlens arrays”, APPLIED OPTICS, 27, No.7, 1988.
[7] E.-B. kely, H.-J. Fuchs, A. Kilian, ”Fabrication of glass lenses by melting technology”, Proc. SPIE , 4440, 85-92, 2001.
[8] J. Schulze, W. Ehrfeld, H. Loewe, A. Michel, A. Picard, “Contactless embossing of microlenses: a new technology for manufacturing refractive microlenses”, SPIE, 3009, 89-98, 1997.
[9] M.-H. Wu and G. M Whitesides, “Fabrication of two-dimensional arrays of microlenses and their applications in photolithography”, Micromechanics and Microengineering, 12, 747-758 , 2002.
[10] W.-X. Yu, X.-C. Yuan, N.-Q. Ngo, W.-X. Que, W.-C. Cheong and V. Koudriachov, “Single-step fabrication of continuous surface relief micro-optical elements in hybrid sol-gel glass by laser direct writing”, OPTICS XPRESS, 10, 2002.
[11] K.-S. Chen, I.-K. Lin and F.-H. Ko, “Fabrication of 3D polymer microstructures using electron beam lithography and nanoimprinting technologies”, Micromechanics and Microengineering, 15, 1894-1903, 2005.
[12] B. Morgan, J. Krizmanic, and R. Ghodssi “Development of a deep silicon phase Fresnel lens Using gray-scale lithography and deep reactive ion etching”, Micromechanics and Microengineering, 13, 2004.
[13] T. Okamoto, M. Mori, T. Karasawa, S. Hayakawa, I. Seo, and H. Sato, “Ultraviolet-cured polymer microlens arrays”, APPLIED OPTICS, 38 , 1999.
[14] S. Haselbeck, H.Schreiber, J. Schwider, N. Streibi, “Microlenses fabricated by melting a photoresist on a base layer”, SPIE, 32, 1322-1324, 1993.
[15] Z. D. Popovic, R. A. Sprague, and G. A. N. Connell, "Technique for monolithic fabrication of microlens arrays", APPLIED OPTICS. 27, 1281-1284, 1988.
[16] D. Daly, R. F. Stevens, M. C. Hutley, and N. Davies, "The manufacture of microlenses by melting photoresist”, Meas. Sci. Technol. 1, 759-766, 1990.
[17] 韋乾佑, “以微電鑄法製造高填充率之微透鏡陣列模仁研究”, 國立台灣科技大學機械工程系碩士學位論文, 2005。
[18] H. Yang, C.-K. C., C.P. Lin and S.C. Shen, “Micro-ball lens array modeling and fabrication using thermal reflow in two polymer layers." Micromechanics and Microengineering, 14, 277-282, 2004.
[19] M.G. Han, Y.J. Park, S.H. Kim, B.S. Yoo and H.H. Park, “Thermal and chemical stability of reflowed-photoresist microlenses”, Micromechanics and Microengineering, 14, 2004.
[20] Fowkes F M., “Contact angle, Wettability an adhesion”, Advances in Chemistry, Series 43 C. Washington. DC, 1-51, 1964.
[21] Kwok D. Y, Neumann A. W., “Contact angle measurement and contact angle interpretation” J, Advances in Colloid and Interface Science, 81, 167-249, 1999.
[22] Bartell F E, Shepard J W., “Surface roughness as related to hysteresis of contact angle”, Part I:The system-water-air” J., The Journal of Physical Chemistry, 57:211-215, 1953.
[23] Fowkes F M., “Contact angle, Wettability an adhesion”, Advances in Chemistry, Series 43 C. Washington. DC, 112-135, 1964.
[24] Eick J. D., Good R. J., Neumann A. W., “Thermodynamics of contact angles, Part II:rough solid surfaces” J., Journal of Colloid and Interface Science, 53, 235-248, 1975.
[25] Huh C., Mason S. G., “Effects of surface roughness on wetting” J., Journal of Colloid and Interface Science, 60,1 1-38, 1977.
[26] Good R J., “A thermodynamic derivation of Wenzel’s modification of Young’s equation for contact angles, together with a theory of hysteresis” J. Journal of American Chemical Society, 74, 5401-5402, 1952.
[27] Johnson R. E. Jr., Dettre R. H., “Contact angle hysteresis, Part III: Study of an idealized heterogeneous surfaces”, Journal of Physical Chemistry, 68, 1744-1749, 1964.
[28] Johnson R. E. Jr., Dettre R. H., “Contact angle hysteresis, Part IV: Contact angle measurments on heterogeneous surfaces” J., The Journal of Physical Chemistry, 69, 1507-1514, 1965.
[29] Schwartz L. W., Garoff S., “Contact angle hystresis on heterogeneous surface” J., Langrmuir, 1(2), 219-230, 1985.
[30] Marmur A., “Contact angle hysteresis on heterogeneous smooth surface” J. Journal of Colloid and Interface Science, 168, 40-46, 1994.
[31] Decker E. L., Garoff S., “Using vibration noise to probe energy barriers producing contact angle hysteresis” J., Langmuir, 12, 2100-2110, 1996.
[32] Decker E. L., Garoff S., “Using vibration noise to probe energy barriers producing contact angle hysteresis” J., Langmuir, 13, 6321-6332, 1997.
[33] Matijevic E., “Surface and Colloid Science” C., New York, Wiley-Interscience, 85-151, 1969.
[34] Timmons C. O., Zisman W. A., “The effect of liquid structure on contact angle hysteresis” J., Journal of Collid and Interface Science, 22, 165-171, 1966.
[35] Fadeev A. Y., McCarthy T. J., “Binary Monolayer mixtures:Modification of nanopores in silicon-supported tris(trimethylsiloxy) silyl monolayer” J., Langmuir, 15(21), 7238-7243, 1999.
[36] Chen W, McCarthy T. J. “Layer-Layer deposition: A tool for polymer surface modification” J., Macromolecules, 30(1), 78-86, 1997.
[37] Fadeev A. Y., McCarthy T. J., “Trialklsilane monolayers covalently attached to silicon surface: Wettability studies indicating that molecular topography contributes to contact angle hysteresis” J., Langmuir, 15 (11), 3759-3766., 1999.
[38] Youngblood J. P., McCarthy T. J., “Ultra-hydrophobic polymer surfaces prepared by simultaneous ablation of polypropylene and sputtering of poly (tetrafluoroethylene) using radio frequency plasma” J., Macromolecules, 32(20), 6800-6806, 1999.
[39] Sedev R. V., Petrov J. G., Neumann A. W., “Effect of swelling of polymer surface on advancing and receding contact angles” J., Journal of Colloid and Interface Science, 180, 36-42, 1996.
[40] Sedev R, V., Budziak C, J, Petrov J, G, “Dynamic contact angles at low velocities” J, 1993.
[41] Lam C. N. C., Kim N., Hui D., “The effect of liquid properties to contact angle hysteresis” J., Colloids and Surfaces A, 189, 265-278, 2001.
[42] Lam C. N. C., Ko L. H. Y., Yu L. M. Y., “Dynamic cycling contact angle measurement: Study of advancing and receding contact angles” J., Journal of Colloid and Interface Science, 243, 208-218, 2001.
[43] Wenzel R. N., Ind. Eng. Chem., 28, 988, 1936.
[44] Cassie A. B. D. and Baxter S. T., Faraday Soc., 40, 546, 1944.
[45] J. Lee, B. He and N. A. Patankar, “A roughness-based wettability switching membrane device for hydrophobic surfaces”, Micromechanics and Microengineering, 15, 2005.
[46] D. L. MacFarlane, V. Narayan, J. A.. Tatum, W. R. Cox, T. Chen, and D. J. Hayes, “Microjet fabrication of microlens arrays”, IEEE Photonics Technology Letter, 6, 1112-1114, 1994.
[47] 葉星輝, 生物晶片之螢光光學檢測, 國立中央大學光電科學研究所碩士論文, 2005。 |