| 摘要(英) |
Absttract
A spring terminal is a component of electrical connectors. For its requirements of insertion and withdrawal force, we would like to discuss the maximum of insertion and withdrawal force for the spring terminal. For the analysis in this thesis, first, we set insertion force and withdrawal force as the quality characteristics. Further, we set the factor that affects the quality characteristics as the length of spring teminal arm (L)、the length of a curve portion that connects the main body and arm of terminal (H)、the width of arm (W), and the gap that is formed between the spring terminal arms (D).
The experiment was designed based on the 4 factors-3 levels Box–Behnken design, with ABAQUS software for finite element analysis simulations. Simulation result was used for setting up the model of the response surface of quality characteristic by the method of linear regression using the Minitab software.The simulation data obtained in this thesis were compared with experiments to verify their effectiveness and appropriateness. The standardized residuals of insertion force, withdrawal force and maximum von-Mise stress simulated by the regression model of response surface were within +/-3. Also, the error between the optimizations, determined by the simulation and response surface methodology, respectively, was around 2%. It proves the reliability for using response surface methodology in the application of spring terminals.
Keywords : Response Surface Methodology (RSM), Box–Behnken Design, Finite Element Analysis, Spring Terminals and Optimization. |
| 參考文獻 |
參考文獻
[1] Mroczkowski, R. S., Electronic Connector Hand- book, McGraw-Hill, 1998。
[2] Wager, H.N.,1971.”Principles of electronic contacts,”in Physical Design of Electronic Systems,v3,Chap. 8, Prentice-Hall.
[3] Sawchyn, I., and Sproles, E.S. Jr., “Optimizing force and geometry parameters in design of reduced insertion force connectors,” IEEE Transactions on Components,Hybrids, and Manufacturing Tech., vol. 15, 1992, pp. 1025-1033。
[4] Whitley, J. H., and Mroczkowski, R. S., “Concerning Normal Force Requirements for Precious Metal Plated Connectors”, Conn. and Interconn. Tech. Symp.,Philadelphia, PA, 1987。
[5] Engel, P.A., Nemier, S.E., and Toda, M.D., “Stress and tolerance analysis for zero insertion force (ZIF) connector,” Journal of Electronic Packaging, vol. 111, 1989, pp. 9-15。
[6] Yamada, S.E., and Ueno, H., “Analysis of insertion force in elastic/plastic mating,” Journal of Electronic Packaging, vol. 112, 1990, pp. 192-197。
[7] Ling, Y., “Mating mechanics and stubbing of separable connectors,” IEEE Electronic Components & Technology Conference, 1998, pp.
6-13。
[8] 蔡澤銘，電子插槽連接器之插拔力分析，碩士論文，私立長庚大學機械研究所，1999。
[9] 徐元展，電子連接器接觸彈簧形態最佳化設計，碩士論文，私立元智大學機械研究所，2000. (or, Journal of Electronic Packaging, Trans. of ASME, vol. 124, n 3,2002, pp. 178-183)。
[10] Chikazawa, T., Lim, C.K., Luu, H.V., Toda, M.D., and Vogelmann, J.T., “Sensor technology for ZIF connectors,” Journal of Electronic Packaging, vol.112, 1990, pp. 187-191。
[11] Engel, P.A., Nemier, S.E., and Toda, M.D. “Stress and tolerance analysis for zero
[12] Sehring, J.F., 1990.”Electronic connector design optimization using finite element analysis techniques,” Connection Technology, v6,
p43-45.
[13] 電子工業聯盟(Electronic Industries Alliance - EIA)，其為美國電子產品製造商的一個產業組織，EIA-364-27B規範中的衝擊特性
[14] 葉怡成, 製程與產品最佳化, 五南出版社, 2001年6月
[15] 愛發股份有限公司,ABAQUS實務入門引導, 2005年1月
[16] 機械工業出版社, ABAQUS有限元素分析實例詳解, 2006年6月 |
[Endnote RIS 格式]
[相關文章]
[文章引用]
[完整記錄]
[館藏目錄]
[檢視]
plurk
funp
live
udn
HD
myshare
netvibes
friend
youpush
delicious
baidu
Google bookmarks
del.icio.us
hemidemi
facebook
twitter
google
reddit