參考文獻 |
參考文獻
[1] Y. Kojima, "Platform Science and Technology for Advanced Magnesium Alloys," Mater. Sci. Forum, vol. 350, pp. 3-18, 2000.
[2] E. Ghali, W. Dietzel, and K.-U. Kainer, "General and localized corrosion of magnesium alloys: A critical review," Journal of Materials Engineering and Performance, vol. 13, pp. 7-23, 2004.
[3] R. B. Mears and C. D. Brown, "Light Metals for the Cathodic Protection of Steel Structures," Corrosion, vol. 1, pp. 113-118, 1945.
[4] D. R. Lide, Handbook of Chemistry and Physics, 71st ed.: CRC Press, 1991.
[5] P. Vanýsek, Handbook of Chemistry and Physics, 88th ed., 2007.
[6] M. Pourbaix, Atlas of Electrochemical Equilibriain Aqueous Solutions: National Association of Corrosion Engineers, 1974.
[7] ASM specialty handbook: Magnesium and magnesium alloys, 1999.
[8] J. L. Murray, "The Al-Mg (Aluminum-Magnesium) system," Bull. Alloy Phase Diagr., vol. 3, pp. 60-74, 1982.
[9] K. Z. Chong and T. S. Shih, "Conversion-coating treatment for magnesium alloys by a permanganate–phosphate solution," Mater. Chem. Phys., vol. 80, pp. 191-200, 2003.
[10] A. A. Nayeb-Hashemi, J. B. Clark, and A. D. Pelton, "The Li-Mg (Lithium-Magnesium) system," Bull. Alloy Phase Diagr., vol. 5, pp. 365-374, 1984.
[11] 吳泓瑜, "鎂鋰鋅合金之顯微結構與機械性質研究," 博士論文, 中華大學, 民國96年.
[12] 香港生產力促進局-材料及製造科技部, 鎂合金表面處理技術, 表面處理通訊第33期.
[13] S. Ono, K. Asami, and N. Masuko, "Mechanism of Chemical Conversion Coating Film Growth on Magnesium and Magnesium Alloys," Mater. Trans. JIM, vol. 42, pp. 1225-1231, 2001.
[14] L. Kouisni, M. Azzi, M. Zertoubi, F. Dalard, and S. Maximovitch, "Phosphate on magnesium alloy AM60 part 2: Electrochemical behavior in borate buffer solution," Surf. Coat. Technol., vol. 192, p. 239, 2005.
[15] J. I. Skar and D. Albright, "Phosphate permanganate: a chrome free alternative for magnesium pretreatment, Magnesium Alloys and their Applications," pp. 469-474, 2000.
[16] H. Huo, Y. Li, and F. Wang, "Corrosion of AZ91D magnesium alloy with a chemical conversion coating and electroless nickel layer," Corros. Sci., vol. 46, pp. 1467-1477, 2004.
[17] K. Y. Chiu, M. H. Wong, F. T. Cheng, and H. C. Man, "Characterization and corrosion studies of fluoride conversion coating on degradable Mg implants," Surf. Coat. Technol., vol. 202, pp. 590-598, 2007.
[18] C. Wang, S. Zhu, F. Jiang, and F. Wang, "Cerium conversion coatings for AZ91D magnesium alloy in ethanol solution and its corrosion resistance," Corros. Sci., vol. 51, pp. 2916-2923, 2009.
[19] H. Ardelean, I. Frateur, and P. Marcus, "Corrosion protection of magnesium alloys by cerium, zirconium and niobium-based conversion coatings," Corros. Sci., vol. 50, pp. 1907-1918, 2008.
[20] M. F. Montemor, A. M. Simo˜es, and M. J. Carmezim, "Characterization of rare-earth conversion films formed on the AZ31 magnesium alloy and its relation with corrosion protection," Appl. Surf. Sci., vol. 253, pp. 6922-6931, 2007.
[21] J. K. Lin and J. Y. Uan, "Formation of Mg,Al-hydrotalcite conversion coating on Mg alloy in aqueous HCO3-/CO32- and corresponding protection against corrosion by the coating," Corros. Sci., vol. 51, pp. 1181-1188, 2009.
[22] N. Birbilis, P. C. Howlett, D. R. MacFarlane, and M. Forsyth, "Exploring corrosion protection of Mg via ionic liquid pretreatment," Surf. Coat. Technol., vol. 201, pp. 4496-4504, 2007.
[23] M. F. He, L. Liu, Y. T. Wu, Z. X. Tang, and W. B. Hu, "Corrosion properties of surface-modified AZ91D magnesium alloy," Corros. Sci., vol. 50, pp. 3267-3273, 2008.
[24] K. H. Yang, M. D. Ger, W. H. Hwu, Y. Sung, and Y. C. Liu, "Study of vanadium-basedchemical conversion coating on the corrosion resistance of magnesium alloy," Mater. Chem. Phys., vol. 101, pp. 480-485, 2007.
[25] X. P. Lei, G. Yu, Y. P. Zhu, Z. P. Zhang, X. M. He, B. N. Hu, et al., "Successful cyanide free plating protocols on magnesium alloys.," Trans. Inst. Metal Finishing, vol. 88, pp. 75-80, 2010.
[26] M. A. Gonzalez-Nunez, C. A. Nunez-Lopez, P. Skeldon, G. E. Thompson, H. Karimzadeh, P. Lyon, et al., "A Non-Chromate Conversion Coating for Magnesium Alloys and Magnesium-Based Metal Matrix Composites," Corros. Sci., vol. 37, pp. 1763-1772, 1995.
[27] M. Takaya, "Produce of manganence-type chemical conversion coatings for magnesium alloys and their corrosion resistance," JILM, vol. 45, pp. 713-718, 1995.
[28] H. Umehara, M. Takaya, and Y. Kojima, "An investigation of the structure and corrosion resistance of permanganate conversion coatings on AZ91D magnesium Alloy," Mater. Trans., JIM, vol. 42, pp. 1691-1699, 2001.
[29] J. E. Gray and B. Luan, "Protective coatings on magnesium and its alloys-a critical review," J. Alloys Compd., vol. 336, pp. 88-113, 2002.
[30] L. Chang, "Growth regularity of ceramic coating on magnesium alloy by plasma electrolytic oxidation," J. Alloys Compd., vol. 468, pp. 462-465, 2009.
[31] A. L. Yerokhin, X. Nie, A. Leyland, A. Matthews, and S. J. Dowey, "Review Plasma electrolysis for surface engineering," Surf. Coat. Technol., vol. 122, pp. 73-93, 1999.
[32] L. Rama Krishna and G. Sundararajan, "Aqueous Corrosion Behavior of Micro Arc Oxidation (MAO)-Coated Magnesium Alloys: A Critical Review," JOM, vol. 66, pp. 1045-1060, 2014.
[33] I. Corni, M. P. Ryan, and A. R. Boccaccini, "Electrophoretic deposition: From traditional ceramics to nanotechnology," J. Eur. Ceram. Soc., vol. 28, pp. 1353-1367, 2008.
[34] Q. Tian and H. Liu, "Electrophoretic deposition and characterization of nanocomposites and nanoparticles on magnesium substrates," Nanotechnology, vol. 26, pp. 1-18, 2015.
[35] 柯賢文, 腐蝕及其防治: 全華科技圖書股份有限公司, 民國92年.
[36] M. G. Fontana, 3 rd ed., 1986.
[37] 楊昇晃, "微型燃料電池設計、製作與電化學阻抗量測分析," 碩士論文, 中山大學, 民國94年.
[38] M. E. Orazem and B. Tribollet, Electrochemical Impedance Spectroscopy: Wiley, 2008.
[39] M. Ciureanu, S. D. Mikhailenko, and S. Kaliaguine, "PEM fuel cells as membrane reactors: kinetic analysis by impedance spectroscopy," Catal. Today, vol. 82, pp. 195-206, 7/30/ 2003.
[40] J. M. Song, S. Y. Cha, and W. M. Lee, "Optimal composition of polymer electrolyte fuel cell electrodes determined by the AC impedance method," J. Power Sources, vol. 94, pp. 78-84, 2/15/ 2001.
[41] J.-D. Kim, Y.-I. Park, K. Kobayashi, M. Nagai, and M. Kunimatsu, "Characterization of CO tolerance of PEMFC by ac impedance spectroscopy," Solid State Ionics, vol. 140, pp. 313-325, 4/1/ 2001.
[42] M. A. B. V. Electrochemical Impedance Spectroscopy (EIS) Part 4 –Equivalent Circuit Models. Available: http://www.metrohm-autolab.com/Applications/
[43] K. Kumagawa and T. Suzuki, "Effect of cooling rate on cast structure and formability of AZ31 magnesium alloy," Journal of Japan Institute of Light Metals, vol. 59, pp. 19-23, 2009.
[44] F. Guo, D. Zhang, X. Fan, J. Li, L. Jiang, and F. Pan, "Microstructure, texture and mechanical properties evolution of pre-twinning Mg alloys sheets during large strain hot rolling," Mater. Sci. Eng., A, vol. 655, pp. 92-99, 2016.
[45] C.-H. Chiu, Horng-YuWu, Jian-YihWang, and S. Lee, "Microstructure and mechanical behavior of LZ91 Mg alloy processed by rolling and heat treatments," J. Alloys Compd., vol. 460, pp. 246-252, 2008.
[46] C. A. Huang, T. H. Wang, T. Weirich, and V. Neubert, "Electrodeposition of a protective copper/nickel deposit on the magnesium alloy (AZ31)," Corros. Sci., vol. 50, pp. 1385-1390, 2008.
[47] Y.-l. Cheng, T.-w. Qin, H.-m. Wang, and Z. Zhang, "Comparison of corrosion behaviors of AZ31, AZ91, AM60 and ZK60 magnesium alloys," Trans. Nonferrous Met. Soc. China, vol. 19, pp. 517-524, 2009.
[48] Y.-S. Huang, T.-S. Shih, and C.-E. Wu, "Electrochemical behavior of anodized AA6063-T6 alloys affected by matrix structures," Appl. Surf. Sci., vol. 264, pp. 410-418, 2013.
[49] I. B. Singh, M. Singh, and S. Das, "A comparative corrosion behavior of Mg, AZ31 and AZ91 alloys in 3.5% NaCl solution," J. Magnesium Alloys, vol. 3 pp. 142-148, 2015.
[50] D. Zhang, Y. Gou, Y. Liu, and X. Guo, "A composite anodizing coating containing superfine Al2O3 particles on AZ31 magnesium alloy," Surf. Coat. Technol., vol. 236, pp. 52-57, 2013.
[51] D. Sreekanth, N. Rameshbabu, and K. Venkateswarlu, "Effect of various additives on morphology and corrosion behavior of ceramic coatings developed on AZ31 magnesium alloy by plasma electrolytic oxidation," Ceram. Int., vol. 38, pp. 4607-4615, 2012.
[52] Atomic and ionic radii. Available: http://www.wiredchemist.com/chemistry/data/atomic-and-ionic-radii
[53] NIST-JANAF Thermochemical Tables. Available: http://kinetics.nist.gov/janaf/
[54] F. J. Peryea and J. K. Kittrick, "Relative solubility of corundum, gibbsite, boehmite, and diaspore at standard state conditions," Clays Clay Miner., vol. 36, pp. 391-396, 1988.
[55] G. Galicia, N. Pébère, B. Tribollet, and V. Vivier, "Local and global electrochemical impedances applied to the corrosion behaviour of an AZ91 magnesium alloy," Corros. Sci., vol. 51, pp. 1789-1794, 2009.
[56] G. Baril and N. Pebere, "The corrosion of pure magnesium in aerated and deaerated sodium sulphate solutions," Corros. Sci., vol. 43, pp. 471-484, 2001.
[57] Z. Song, Z. Xie, G. Yu, B. Hu, X. He, and X. Zhang, "A novel palladium-free surface activation process for electroless nickel deposition on micro-arc oxidation film of AZ91D Mg alloy," J. Alloys Compd., vol. 623, pp. 274-281, 2015.
[58] G. Baril, G. Galicia, C. Deslouis, N. Pébère, B. Tribollet, and V. Vivier, "An impedance investigation of the mechanism of pure magnesium corrosion in sodium sulfate solutions," J. Electrochem. Soc., vol. 154, pp. C108-C113, 2007.
|