參考文獻 |
[1] C.J. Pinzone, Crystalgrower at en. wikipedia, 2006.
[2] H. Liu, “Slab cross flow CVD reactor”, US Patent No. 8,216,375 B2, Jul. 10, 2012.
[3] B. Mitrovic, A. Gurary, L. Kadinski, “On the flow stability in vertical rotating disc MOCVD reactors under a wide range of process parameters”, Journal of Crystal Growth, Vol. 287, pp. 656-663, 2006.
[4] M. Dauelsberg, E.J. Thrush, B. Schineller and J. Kaeppeler, “Technology of MOVPE production tools”, Elsevier Ltd, 2004.
[5] G. Evans, and R. Greif, “Effect of boundary conditions on the flow and heat transfer in a rotating disk chemical vapor deposition reactor, "Numerical Heat Transfer , Vol. 12, pp. 243-252, 1987.
[6] D.I. Fotiadis, and S. Kieda, “Transport phenomena in vertical reactors for metalorganic vapor phase epitaxy:I. Effects of heat transfer characteristics, reactor geometry, and operating conditions,” Journal of Crystal Growth, Vol. 102, pp. 441-470, 1990.
[7] S. Joh, and G.H. Evans, “Heat transfer and flow stability in a rotating disk / stagnation flow chemical vapor deposition reactor", Numerical Heat Transfer, Part A: Applications, Vol. 31, Issue 8, pp. 867-879, April 1997.
[8] D.W. Weyburne, B.S. Ahem, “Design and operating considerations for a water-cooled close-spaced reactant injector in a production scale MOCVD reactor”, Journal of Crystal Growth, Vol. 170, pp. 77-82, 1997.
[9] C. Park, J.Y. Hwang, M. Huang, and T.J. Anderson, “Investigation of an up flow cold-wall CVD reactor by gas phase Raman spectroscopy,” Thin Solid Films, Vol. 409, pp. 88-97, 2002.
[10] G.W. Young, S.I. Hariharan, and R. Carnahan, “Flow effects in a vertical CVD reactor”, SIAM J. Appl. Math., Vol. 52, No. 6, pp. 1509–1532, December 1992.
[11] A.G. Mathews, and J.E. Peterson, “Flow visualizations and transient temperature measurements in an axisymmetric impinging jet rapid thermal chemical vapor deposition reactor”, Journal of Heat Transfer, Vol. 124, Issue 3, pp. 564-570, June 2002.
[12] G. Luo, S.P. Vanka, and N. Glumac, “Fluid flow and transport processes in a large area atmospheric pressure stagnation flow CVD reactor for deposition of thin films”, International Journal of Heat and Mass Transfer, Vol. 47, Issue 23, pp.4979-4994, November 2004.
[13] S.P. Vanka, G. Luo, and N.G. Glumac, “Numerical study of mixed convection flow in an impinging jet CVD reactor for atmospheric pressure deposition of thin films,” Journal of Heat Transfer, Vol. 126, No. 5, pp. 764-775, October 2004.
[14] B. Mitrovic, A. Gurary, W. Quinn, “Process conditions optimization for maximum deposition rate and uniformity in vertical rotating disc MOCVD reactors based on CFD modeling,” Journal of Crystal Growth, Vol. 303, pp. 323-329, 2007.
[15] L. Kadinskia, V. Merai, A. Parekh, J. Ramer, E.A. Armour, R. Stall, A. Gurary, A. Galyukov, and Y. Makarov, “Computational analysis of GaN/InGaN deposition in MOCVD vertical rotating disk reactors,” Journal of Crystal Growth, Vol. 261, pp. 175–181, 2004.
[16] C. Theodoropoulos, T.J. Mountziaris, H.K. Moffat, J. Han. “Design of gas inlets for the growth of gallium nitride by metalorganic vapor phase epitaxy,” Journal of Crystal Growth, Vol. 217, pp. 65-81, 2000.
[17] C.Y. Shin, B.J. Baek, C.R. Lee, B. Pak, J.M. Yoon, K.S. Park, “Numerical analysis for the growth of GaN layer in MOCVD reactor,” Journal of Crystal Growth, Vol. 247, pp. 301-312, 2003.
[18] R. Zuo, H. Zhang, X.l Liu, “Transport phenomena in radial flow MOCVD reactor with three concentric vertical inlets,” Journal of Crystal Growth, Vol. 293, pp. 498-508, 2006.
[19] R. Zuo, Q. Xu, H. Zhang, “An inverse-flow showerhead MOVPE reactor design,” Journal of Crystal Growth, Vol. .298, pp. 425-427, 2007.
[20] C.H. Lin, W.T. Cheng, J.H. Lee, “Effect of embedding a porous medium on the deposition rate in a vertical rotating MOCVD reactor based on CFD modeling,” International Communications in Heat and Mass Transfer, Vol. 36,pp. 680-685, 2009.
[21] C.S Kim, J. Hong, J. Shim, Y.S Won, and Yong-I1 Kwon, “Multiphysics modeling and design of ultralarge multiwafer MOVPE reactor for group III-Nitride light emitting diodes,” EuroSimE , 11th, 2010.
[22] Wonkyun Yang, and Junghoon Joo, “Numerical Modeling for GaN Deposition by MOCVD: Effects of the Gas Inlet,” Applied Science and Convergence Technology, Vol.23, No.3, pp.139~144, May 2014.
[23] T.C. Chang, P.H. Chiou, and T.F. Lin, “Visualization of mixed convective vortex rolls in an impinging jet flow of air through a cylindrical chamber”, International Journal of Heat and Mass Transfer, Vol. 45, Issue 16, pp. 3357-3368, July 2002.
[24] J.C. Hsieh, C.W. Cheng, and T.F. Lin, “Suppression of buoyancy-driven vortex flow resulting from a low speed jet impinging onto a heated disk in a vertical cylinder by cylinder top tilting”, International Journal of Heat and mass transfer, Vol. 47, Issue 14-16, pp. 3031-3045, July 2004.
[25] T.C. Cheng, T.F. Lin, J.Y. Yang, and S.R. Jian, “Visualization of vortex flow patterns with a uniformly perforated showerhead in a model lamp heat, single-wafer thermal processor”, Chemical Vapor Deposition, Vol. 13, Issue 8, pp. 427-432, August 2007.
[26] K.M. Chen, F.C. Hsieh, J.C. Hiseh, and T. F. Lin, “A further investigation of effects of jet-disk separation distance on steady mixed convective vortex flow resulting from a confined impinging air jet”, International Journal of Heat and mass transfer, Vol. 52, Issue 23-24, pp. 5348-5357, November 2009.
[27] Y.H. Liu, L.W. Tseng, C.Y. Huang, K.L. Lin, C.C. Chen, “Particle image velocimetry measurement of jet impingement in a cylindrical chamber with a heated rotating disk”, International Journal of Heat and Mass Transfer, Vol. 65, pp. 339-347, 2013.
[28] D. Sengupta, S. Mazumder, W. Kuykendall, S.A. Lowry, “On the flow stability in vertical rotating disc MOCVD reactos under a wide range of process parameters”, Journal of Crystal Growth, Vol. 279, pp. 369-382, 2005.
[29] W.K. Cho, D.H. Choi, M.U. Kim, “Optimization of the inlet velocity profile for uniform epitaxial growth in a vertical metalorganic chemical vapor deposition reactor”, International Journal of Heat and Mass Transfer, Vol. 42, pp. 4143-4152, 1999.
[30] 林雋幃,「創新進氣擴散系統設計發-檔板與垂直噴流設計於水平腔體」,國立中央大學,碩士論文,民國一O三年。
[31] 莊子慶,「MOCVD腔體熱流場與新式進氣檔板之設計模擬分析研究」,國立中央大學,碩士論文,民國一O二年。
[32] 林宜正,「化學氣相沉積之噴頭性能模擬分析」,國立中山大學,碩士論文,民國九十二年。 |