參考文獻 |
[1] V. M. Segal, "Materials processing by simple shear," Materials Science and Engineering A197, pp. 157-164, 1995.
[2] F. Blaha and B. Langenecker, "Dehnung von Zink-Kristallen unter Ultraschalleinwirkung," Naturwissenschaften Volume 42, p. 556, 1955.
[3] J. Tsujina, T. Ueoka, H. Sato and K. Takiguchi, "Characteristics of ultrasonic bendingof metal plates using a longitudinal vibration die and punch," IEEE Ultrasonic Symposium, pp. 863-866, 1992.
[4] J. X. Zheng, H. Hu and J. Cheng, "The development of constitutive equations of solid materials under the action of super frequency vibration," Journal of Harbin Institute of Technology Vol.20, No.1, 1997.
[5] T. Jimma, Y. Kasuga, N. Iwaki, O. Miyazawa, E. Mori, K. Ito and H. Hatano, "An application ofultrasonic vibration to the deep drawing process," Journal of Materials Processing Technology Vol.80-81, pp. 406-412, 1998.
[6] 何京力, 聞邦椿. "振動塑性加工的進展及若干問題". 遼寧工學院學報, Vol.19(4), pp. 5-9. 1999.
[7] H. O. K. Kirchner, W. K. Kromp, F. B. Prinz, & P. Trimmel, "Plastic deformation under simultaneous cyclic and unidirectional loading at low and ultrasonic frequencies," Materials science and engineering, Vol.68(2), pp. 197-206. 1985.
[8] K. Siegert, "Influencing the friction in metal forming processes by superimposing ultrasonic waves," CIRP Annals-Manufacturing Technology, Vol. 50, pp. 195-200, 2001.
[9] M. Murakawa and M. Jin, "The utility of radially and ultrasonically vibrated dies in the wiredrawing process," Journal of Materials Processing Technology, Vol. 113, pp. 81-86, 2001.
[10] M. Hayashi, M. Jin, S. Thipprakmas, M. Murakawa, J. C. Hung and Y. C. Tsai, "Simulation of ultrasonic-vibration drawing using the finite element (FEM)," Journal of MaterialsProcessing Technology, Vol. 140, pp. 30-35, 2003.
[11] J. C. Hung and C. H. Hung, "The influence of ultrasonic-vibration on hot upsetting of aluminum alloy," Ultrasonics 43, p. 692–698, 2005.
[12] Y. Daud, M. Lucas and Z. Huang, "Modelling the effects of superimposed ultrasonic vibrations on tension and compression tests of aluminium," Journal of Materials Processing Technology, pp. 179-190, 2007.
[13] Y. Ashida and H. Aoyama, "Press forming using ultrasonic vibration," Journal of Materials ProcessingTechnology, Vol. 187-188, pp. 118-122, 2007.
[14] J. C. Hung and Y. C. Tsai, "Frictional effect of ultrasonic-vibration on upsetting," Ultrasonics,43, pp. 277-284, 2007.
[15] Mao, Q., N. Coutris, and G. Fadel. "CHARACTERIZATION OF ACOUSTIC SOFTENING OF ALUMINUM 6061 WITHIN A PLASTICITY FRAMEWORK."
[16] 吳哲威, “超音波振動輔助沖切加工之斷面品質研究, 碩士論文,” 國立中央大學, 2011.
[17] Y. Liu, S. Suslov, Q. Han, C. Xu and L. Hua, "Microstructure of the pure copper produced by upsetting with ultrasonic vibration," Materials Letters, Vol. 67, pp. 52-55, 2012.
[18] Z. Yao, G. Y. Kim, L. Faidley, Q. Zou, D. Mei and Z. Chen, "Effects of superimposed high-frequency vibration on deformation of aluminum in micro/meso-scale upsetting," Journal of Materials Processing Technology 212, p. 640–646, 2012.
[19] Z. Yao, G. Y. Kim, Z. Wang, L. Faidley, Q. Zou , D. Mei and Z. Chen, "Acoustic softening and residual hardening in aluminum: Modeling and experiments," International Journal of Plasticity 39 , pp. 75-87, 2012.
[20] A. T. Witthauer, Z. Yao and G. Y. K. PhD, "Characterization of the Effects of High-Frequency Vibration on Alu- minum and Copper Upsetting," ICOMM 2012 No.51, 2012.
[21] 王子仁, “超音波振動輔助沖切加工之有限元素分析, 碩士論文,” 國立中央大學, 2012.
[22] F. Djavanroodi, H. Ahmadian, K. Koohkan and R. Naseri, "Ultrasonic assisted-ECAP," Ultrasonics, Vol. 53, p. 1089–1096, 2013.
[23] 陳昱華, “超音波振動輔助等通道彎角擠製之初步研究, 碩士論文,” 國立中央大學, 2013.
[24] 黃彬碩, “超音波振動方式輔助等通道彎角擠製之研究, 碩士論文,” 國立中央大學, 2014.
[25] M. Furukawa, Y. Iwahashi, Z. Horita, M. Nemoto and T. G. Langdon, "The shearing characteristics associated with equal-channel angular pressing," Materials Science and Engineering: A, 257(2), pp. 328-332, 1998.
[26] M. Furukawa and Z. Horita, "Factors influencing the shearing patterns in equal-channel angular pressing," Materials Science and Engineering: A, 332(1), pp. 97-109, 2002.
[27] W. J. Kim, J. C. Namgung and J. K. Kim, "Analysis of strain uniformity during multi-pressing in equalchannel angular extrusion," Scripta Materialia Vol. 53, pp. 293-298, 2005.
[28] A. V. Nagasekhar, T. H. Yip and H. P. Seow, "Deformation behavior and strain homogeneity in equal channel angular extrusion/pressing," Journal of Materials Processing Technology, Vol. 192–193, pp. 449-452, 2007.
[29] S. Xu, G. Zhao, X. Ma and G. Ren, "Finite element analysis and optimization of equalchannel angular pressing for producing ultra-fine grained materials," Journal of Materials ProcessingTechnology, Vol. 184, pp. 209-216, 2007.
[30] V. Patil, U. Chakkingal and T. S. Prasanna Kumar, "Study of channel angle influence on material flow and strain inhomogeneity in equal channel angular pressing using 3D finite element simulation," Journal of Materials Processing Technology, Vol. 209, pp. 89-95, 2009.
[31] A. V. Nagasekhar, S. C. Yoon, Y. Tick-Hon and H. Kim, "An experimental verification of the finite element modeling of equal channel angular pressing," Computational Materials Science, Vol. 46, pp. 347-351, 2009.
[32] F. Djavanroodi and M. Ebrahimi, "Effect of die channel angle, friction and back pressure in the equal channel angular pressing using 3D finite element simulation," Materials Science and Engineering: A, Vol. 527, pp. 1230-1235, 2010.
[33] R. Luri, C. Luis Pérez, D. Salcedo, I. Puertas, J. Leó, I. Pérez and J. P. Fuertes, "Evolution of damage in AA-5083 processed by equal channel angular extrusion using different die geometries," Journal of Materials Processing Technology, Vol. 211, pp. 48-56, 2011.
[34] 張致維, “超音波輔助等通道彎角擠製之有限元素分析, 碩士論文,” 國立中央大學, 2013.
[35] 廖祐懷, “超音波振動輔助多道次等通道彎角擠製之研究, 碩士論文,” 國立中央大學, 2014.
[36] 張家溢, “1070鋁合金超音波輔助等通道彎角擠製之研究, 碩士論文,” 國立中央大學, 2015.
[37] S. Jana and N. S. Ong, "Effect of punch clearance in the high-speed blanking of thick metals using an accerlator designed for a mechanical press," Journal of Mechanical Working Technology, Vol. 19, pp. 55-72, 1989.
[38] W.Kempe, & E.Kroner, "Dislocation damping of aluminum single crystals at room temperature," Zeitschrift für Metallkunde, 47, 302-304, 1956.
[39] G. E. Nevill and F. R. Brotzen, "The effect of vibration on the static yield strength of low-carbon steel," Proc. Am. Soc. Testing Materials, 57, pp. 751-755, 1957.
[40] 超音波工學理論實務. 作者:島川正憲。譯者:賴耿陽。出版社:復漢。出版日:1993/1/1。
[41] “B557M−14 Standard Test Methods for Tension Testing Wrought and Cast Aluminum and Magnesium-Alloy Products”.Annual Book of ASTM Standard.
[42] W. F. Hosford and R. M. Caddell, Metal Forming: Mechanics and Metallurgy, Prentice-Hall, Inc. A Division of Simom & Schuster Englewood Cliffs, NJ 07632, 1983.
[43] 李文, 管金 和 石煥, “氧化鋯陶瓷眼模不銹鋼抽線之理論與實驗分析,” 中國機械工程學會第二十四屆全國學術研討會論文集, pp. 3196-3200, 23、24 11 2007. |