參考文獻 |
[1] Kenneth John Stout, “Three Dimensional Surface Topography; Measurement, Interpretation and Application”, Penton Press, 1994.
[2] Eiichirou Tanaka, “In Situ Diagnosis of a Gear-Tooth Surface Damage Using Laser Scattering”, JSME Journal of Advanced Mechanical Design, Systems, and Manufacturing, Vol.5, No.3, pp.199-213, May, 2011.
[3] Li-Mei Song, “A Non-Contact Gear Measurement Method Based on Laser Vision”, Optoelectronics Letters, Vol.10, No.3, pp.237-240, May, 2014.
[4] Jörg Peters, “Helical Gear Measurement Using Structured Light”, Proceedings of the XVI IMEKO World Congress, Wien, pp.227–230, 2000.
[5] Suping Fang, “Analysis and Compensation Method for Installation Error in Measuring Gear Tooth Flank with Laser Interferometry”, Optical Engineering, Vol.53(8), August, 2014.
[6] Cesar Augusto Sciammarella, “High-Accuracy Contouring Using Projection Moiré”, Optical Engineering, Vol 44(9), September, 2005.
[7] 陳韡中,「齒輪影像量測系統之開發」 ,國立虎尾科技大學機械與機電工程學系碩士論文,民國97年。
[8] 鍾明志,「應用結構光與雙照相機於3D座標量測系統」 ,國立成功大學機械工程學系碩士論文,民國97年。
[9] 李冠誼,「應用結構光投影之三維量測與循跡技術」 ,國立台灣科技大學機械工程學系碩士論文,民國103年。
[10] 白紹翊,「結構光條紋視覺系統之表面量測」 ,中華大學機械工程學系碩士論文,民國101年。
[11] Ho-Ling Fu, Kuang-Chao Fan, Yu-Jan Huang, Ming-Kai Hu, “Innovative Optical Scanning Technique and Device for Three-Dimensional Full-Scale Measurement of Wind-Turbine Blades”, Optical Engineering, Vol 53(12), December, 2014.
[12] 熊耀阳, 孙健, 张富强, 陈晓波, & 习俊通, 应用结构光三维扫描技术重建面部软组织形态的初步研究. 中华口腔医学杂志, Vol42(6), pp.340-342, 2007.
[13] Nikon Non-contact Sensor 3D Metrology System介紹(HN-C3030) :
http://www.nikon.com/products/industrial-metrology/lineup/3d_metrology/noncontact_multisensor/hnc3030/index.htm
[14] Barak Freedman, Alexander Shpunt, Meir Machline, Yoel Arieli, “Depth Mapping Using Projected Patterns”, U.S. Pat., 8493496, October, 2010.
[15] Alexander Shpunt, Benny Pesach, “Optical Pattern Projection”, U.S. Pat, 8384997, November, 2010.
[16] Willard Sterling Boyle and George Edward Smith, “Charge-Coupled Devices A new Approach to MIS Device Strctures”, IEEE spectrum, No.7, pp.18-27, July, 1971.
[17] Panasonic CCD成像元件介紹:
http://av.jpn.support.panasonic.com/support/dsc/knowhow/knowhow27.html
[18] Michael Peter Young, Capturing the CoolnessSM Aesthetic Exposure Triangle Diagram:
http://www.wild-eye.co.za/the-when-how-and-why-of-shutter-speeds/
[19] 陳亮嘉,光學影像之基礎課程講義: http://140.112.14.7/~measlab/course/2013/%E9%87%8F%E6%B8%AC%E6%8A%80%E8%A1%93%E6%87%89%E7%94%A8/1-%E5%85%89%E5%AD%B8%E5%BD%B1%E5%83%8F%E4%B9%8B%E5%9F%BA%E7%A4%8E%20(NTU).pdf
[20] Ramesh Jain, “Machine Vision”, McGraw-Hill, Inc., ISBN 0-07032018-7, 1995.
[21] 陳榮茂,「具不確定性之立體視覺量測誤差分析」 ,國立成功大學航空太空工程學系碩士論文,民國99年。
[22] 佘東穎,「應用立體視覺3D量測技術於五軸工具機防碰撞」,國立中正大學電機工程學系碩士論文,民國103年。
[23] Alasdair McAndrew著,徐曉珮譯,數位影像處理,新加坡商聖智學習亞洲私人有限公司台灣分公司,台北市,2009。
[24] Gonzalez Woods著,繆紹綱譯,數位影像處理,三版,台灣培生教育出版股份有限公司,台北市,2009。
[25] 李朱育等編著,光機電產業設備系統設計,五南圖書出版股份有限公司,台北市,2013。
[26] Otsu, Nobuyuki, “A Threshold Selection Method from Gray-Level”, Histogram, IEEE Transaction on Systems, Man, and Cybernetics, Vol.9, No.1, pp.62-66, January, 1979.
[27] 马艳, “几种边缘检测算子的比较”, Industry and Mine Automation, No.1, pp.54-55, February, 2004.
[28] Marr David and Ellen Hildreth, “Theory of Edge Detection”, Proceedings of the Royal Society of London B: Biological Sciences, Vol.207, No1167, pp.187-217, February, 1980.
[29] John Canny, “Finding Edges and Lines in Images”, Massachusetts Institute of Technology, Tech.Rep.No.720, June, 1983.
[30] Duane Corydon Brown, “Decentering Distortion of Lens”, Photometric Engineering, pp.444-462, 1966.
[31] Gideon Pascal Stein, “Lens Distortion Calibration Using Point Correspondences“, IEEE Computer Society Conference on, A.I. Memo No1595, November, 1996.
[32] Weng, Juyang, Paul Cohen, and Marc Herniou, “Camera Calibration with Distortion Models and Accuracy Evaluation”, IEEE Transactions on pattern analysis and machine intelligence, Vol.14, No.10, pp.965-980, October, 1992.
[33] Jianhua Wang, Fanhuai Shi, Jing Zhang, Yuncai Liu, “A New Calibration Model of Camera Lens Distortion”, Pattern Recognition41, pp.607-615, 2008.
[34] Gideon Pascal Stein, “Lens Distortion Calibration Using Point Correspondences”, Proceedings of the 1997 Conference on Computer Vision and Pattern Recognition(CVPR’97), pp.602-608, June, 1997.
[35] 陳煜彬,「應用機器視覺之新式晶圓定位方法」,國立中央大學光機電工程研究所碩士論文,民國100年。
[36] DIN 3961/ 3962, Tolerances For Cylindrical Gear Teeth-Bases / Tolerances For Cylindrical Gear Teeth-Tolerances For Deviations Of Individual Parameters, 1978.
[37] ANSI/AGMA 2015-1-A01, Accuracy Classification System Tangential Measurements For Cylindrical Gears, 2002.
[38] 石照耀,林虎“齿轮误差多自由度理论”, Journal of Mechanical Engineering, Vol.50, No1, pp.55-60, January, 2014.
[39] 林虎等“基于正交距离回归齿面的齿轮誤差評定”, Optics and Precision Engineering, Vol.23, No11, pp.3192-3199, November, 2015.
[40] 蔡佳宏,「五軸CNC成形砂輪磨齒機線上掃描式量測NC路徑規劃與齒輪精度評估之研究」,國立台灣科技大學機械工程學系碩士論文,民國100年。
[41] Faydor L. Litvin, Alfonso Fuentes-Aznar, “Gear Geometry And Applied Theory”, Cambridge :Cambridge University Press, pp.105-120, 2004.
[42] Sung Joon Ahn, Werner Rauh, Hyung Suck Cho, “Orthogonal Distance Fitting of Implicit Curves and Surfaces”, IEEE Transactions on Pattern Analysis and Machine Intelligence, Vol.24, No5, pp.620-638, May, 2002.
[43] Werner Lotze, and Frank Haertig, “3D Gear Measurement by CMM”, WIT Transactions on Engineering Sciences, Vol.34, pp.333-344, 2001.
[44] 小原治敏著,齒輪入門,小原歯車工業株式會社,昭和61年。 |