參考文獻 |
[1] 中華民國光電學會著,LED工程師基礎概念與應用,五南圖書出版股份有限公司,臺北市,2012年4月。
[2] 呂紹旭,「紫外光LED晶粒產業現況」,光連雙月刊,2012年1月,第29-30頁。
[3] 郭子菱,MOCVD設備發展現況與趨勢,Industrial Economics & Knowledge Center,pp.1-7,2012年。
[4] 方志烈編著,半導體照明技術,電子工業出版社,北京,2009年5月。
[5] Shuji Nakamura, Masayuki Senoh, and Takashi Mukai, “Highly P-Typed Mg-Doped GaN Films Grown with GaN Buffer Layers,” Jpn. J. Appl. Phys., vol. 30, 1991, pp. L1708-L1711.
[6] Shuji Nakamura, “GaN Growth Using GaN Buffer Layers,” Jpn. J. Appl. Phys., vol. 30, 1991, pp. L1705-L1707.
[7] 蘇石川,孔為,陳代芬,韓雷濤編著,熱能工程與先進能源技術仿真設計,化學工業出版社,北京,2014年12月。
[8] 葛志祥,孫永慶,徐吉浣,「傘型紅外線輻射採暖器反射罩的研究」,煤氣與熱力,2001年,06期。
[9] 詹少彬,「MOCVD加熱系統研究」,中國武漢,華中科技大學,碩士論文,2008年。
[10] D. Fahle, H. Behmenburg, C. Mauder, et al, “Growth of GaN in a planetary MOCVD hotwall system,” Journal of Physics Status Solid, 2011, Vol. 8, pp. 2041-2043.
[11] Yinglu Hu, Peixian Li, Zhiming Li, Limin Wu, Hongcai Liu, Dingwei Li, Junchun Bai, “Simulation and Analysis of Temperature Modulate Curve in MOCVD with the Chipped Intrared Heating System,” Electronic Sci. & Tech., 2012, Vol. 25, pp. 108-111.
[12] 邱顯智,「以數值分析法優化MOCVD高溫反應腔體之加熱系統暨實作驗證」,台灣,國立中央大學,碩士論文,民國104年。
[13] 郭勃亨,「雙加熱器有機金屬化學氣相沉積系統上下加熱板溫度對氮化銦鎵薄膜成長研究」,台灣,國立交通大學,碩士論文,民國101年。
[14] Long-quan Xu, Song Fang, Zi-han Tang, Xin-wei Liu, ”Research on Heating Uniformity of MOCVD Heating Device,” Chinese Journal of Luminescsnce, 2017, Vol. 38, No. 2, pp. 220-225.
[15] Yiren Chen, Hang Song, Dabing Li, Xiaojuan Sun, Hong Jiang, Zhiming Li, Guoqing Miao, Zhiwei Zhang, and Yue Zhou, “Influence of the growth temperature of AlN nucleation layer on AlN template grown by high-temperature MOCVD,” Materials Letters, 114 (2014), pp. 26-28.
[16] Michael Quirk‧Julian Serda,Semiconductor Manufacturing Technology,羅文雄、蔡榮輝、鄭岫盈譯,半導體製造技術,台灣培生教育出版股份有限公司,台北,2016年7月。
[17] 伍秀菁、汪若文和林美吟主編,真空技術與應用,財團法人國家實驗研究院儀器科技研究中心,新竹市,民國九十年七月。
[18] 胡智愷,「大尺寸金屬有機化學氣相沉積反應腔體之數值分析模擬研究」,國立中央大學,碩士論文,民國101年。
[19] C. Ratsch, J. Garcia, and R. E. Caflisch,”Influence of edge diffusion on the growth mode on vicinal surfaces,” Appl. Phys. Lett. 87, 141901(2005).
[20] 莊達人,VLSI製造技術,第六版,高立圖書有限公司,2013。
[21] 陳玄宗,「以磁場模擬法設計磁鐵排列改善濺鍍機台之填洞能力」,國立中央大學,碩士論文,民國100年。
[22] SEMATECH, ”Deposition Processes,” in Furnace Processes and Related Topics (Austin, TX: SEMATECH, 1994), p.6.
[23] Zhang X., Moerman I., Sys C., et al, ” Highly uniform AlGaAs/GaAs and InGaAs(P)/InP structure grown in a multiwafer vertical rotating susceptor MOVPE reactor,” Journal of Crystal growth, Vol.170, pp.83-87, 1997.
[24] Yang Liu, Takashi Egawa, Hiroyasu Ishikawa, Baijun Zhang, and Maosheng Hao,”Influence of Growth Temperature on Quaternary AlInGaN Epilayers for Ultraviolet Emission Grown by Meralorganic Chemical Vapor Deposition,” Jpn. J. Appl. Phys., vol. 43, 2004, pp. 241-2418.
[25] 陸大成,段樹坤,金屬有機化合物氣相外延基礎及應用,中國科學院科學出版,北京,2009年5月。
[26] Kish F A, Fletcher R M, AlGaInP light emitting// Stringfellow Gb, Craford M G, high brightnedd light emitting diodes: SEMICONDUCTORS AND Semimetal. Academic Press, 1997, 48: Chap. 5.
[27] Kizhayev S S, et al, “Powerful InAsSbP/InAsSb light emitting diodes grown by MOVPE,” J. Crystal Growth, 2003, 248, pp. 296-300.
[28] 張政彬,「以數值分析法優化MOCVD高溫反應腔體之二段加熱系統暨實作驗證」,台灣,國立中央大學,碩士論文,民國105年。
[29] M. Dauelsberg, C. Martin, H. Protzmann et al, “Modeling and process design of III-nitride MOVPE at near-atmospheric pressure in close coupled showerhead and planetary reactors,” Journal of Crystal Growth, Vol. 298, pp. 418-424, 2007.
[30] 詹少彬,mocvd加熱系統研究,中國,華中科技大學,碩士論文,2008年
[31] Li Zhi-Ming, Jiang Hai-Ying, Han Yan-Bin, Li Jin-Ping, Yin Jian-Qin, Zhang Jin-Cheng, “Temperature Uniformity of Wafer on a Large-Sized Susceptor for a Nitride Vertical MOCVD Reactor,” CHIN. PHYS. LEET., Vol. 29, No. 3(2012)030701, pp. 030701-1-030701-4.
[32] M. Dauelsberg, E. J. Thrush, B. Schineller and J. Kaeppeler, “Technology of MOVPE Production Tools,” Elsevier Ltd, 2004.
[33] D. G. Zhao, J. J. Zhu, D. S. Jiang et al., “Parasitic reaction and its effect on the growth rate of AlN by metalorganic chemical vapor deposition,” Journal of Crystal Growth, Vol. 289, pp.72-75, 2006.
[34] R. Loganathan, M. Balaji, K. Prabakaran, R. Ramesh, M. Jayasakthu. P. Arivazhagan, Shubra Singh, K. Baskr, “The effect of growth temperature on structural quality of AlInGaN/AlN/GaN heterostructures grown by MOCVD,” J Mater Sci: Mater Electron, 26, 2015. pp. 5373-5380.
[35] H. W. Jackson, J. L. Watkins, S. Chung et al., “Conductive sphere in a radio frequency filed: Theoty and applications to postitioners, heating, and noncontact measurements,” J. Appl. Phys., Vol. 79, pp. 3370-3384, 1996.
[36] T. Murakami, Y. Okuno, and H. Yamasaki, “Performance of rf-assisted magnetohydrodynamics power generator,” Physics of Plasmas, Vol. 12, pp. 113503-1~113503-8, 2005.
[37] L. M. Kaufmann, F. Heuken, M. R. Tilders, et al., “Safety aspects of MOVPE in research and development: a example,” Journal of Crystal Growth, Vol. 93, pp. 279-284, 1988.
[38] 林義鈞,「最佳化設計金屬有機化學氣相沉積高溫加熱系統數值分析研究」,台灣,國立中央大學,碩士論文,民國102年。
[39] B. Harris, University Physics, Ver. 2, John Wiley & Sons Inc, USA, 1995.
[40] Y. A. Cengel, Heat and mass transfer, McGraw-Hill Eduactuin(Asia), Third Edition, Singapore, 2006.
[41] J. P. Holman,HEAT TRANSFER,胡凡勳,朱朝煌,邱漢傑,第10版,熱傳遞學,高立圖書有限公司,台北市,2011年01月。
[42] 白長城,張海興,方湖寶,高等學校教材紅外物理,電子工業出版社,北京,1989年。
[43] 王勖成,有限單元法,清華大學出版社,北京,2003年七月。 |