| 參考文獻 |
[1] ISO 21348 Process for Determining Solar Irradiances
[2]CHIEW-SENG KAOY,RADIATION STUDIES OF THE TIN-DOPED MICROSCOPIC DROPLET LASER PLASMA LIGHT SOURCE SPECIFIC TO EUV LITHOGRAPHY, University of Central Florida, 2006.
[3]V.Bakshi,EUV Sources for Lithography, Bellingham, Washington USA,SPIE Press, 2005.
[4]Yi-Ping Lai, “A SIMPLIFIED SPHERICAL-SYMMETRY SIMULATION MODEL FOR THE GENERATION OF 13.5-NM EXTREME ULTRAVIOLET SOURCE BY LASER-PRODUCED PLASMA”, National Taiwan University, Master Thesis, 2012.
[5] T. Ando, S. Fujioka, H. Nishimura, N. Ueda, Y. Yasuda, K. Nagai, T. Norimatsu, M. Murakami, K. Nishihara, N. Miyanaga, et al.,”Optimum laser pulse duration for efficient extreme ultraviolet light generation from laser-produced tin plasmas,” Applied physics letters, vol. 89, no. 15, p. 1501, 2006.
[6] A. Endo, H. Hoshino, T. Suganuma, M. Moriya, T. Ariga, Y. Ueno, M. Nakano, T. Asayama, T. Abe, H. Komori, et al., ” Laser produced euv light source development for hvm,” in Advanced Lithography, pp. 65170O-65170O, International Society for Optics and Photonics, 2007.
[7] J. White, P. Dunne, P. Hayden, F. O′Reilly, and G. O′Sullivan, “Optimizing 13.5 nm laser-produced tin plasma emission as a function of laser wavelength,” Applied physics letters, vol. 90, no. 18, 2007.
[8] D. Campos, S. Harilal, and A. Hassanein, ”Laser wavelength effects on ionic and atomic emission from tin plasmas,” Applied Physics Letters, vol. 96, no. 15, p. 151501, 2010.
[9] D. Campos, S. Harilal, and A. Hassanein, ”The effect of laser wavelength on emission and particle dynamics of Sn plasma,” Journal of Applied Physics, vol. 108, no. 11, p. 113305, 2010.
[10]Igo V.Fomenkov, David C.Brandt, Alexander N. Bykanov, Alex I. Ershov, William N.Partlo, David W. Myers, Norbert R. Bowering, Nigel R. Farrar, Georgiy O. Vaschenko, Oleh V. Khodykin, Jerzy R. Hoffman, Christopher P. Chrobak, Shailendra N. Srivastava, Daniel J. Golich, David A. Vidusek, Silvia De Dea, Richard R. Hou, “Laser-Produced Plasma Light Source for EUVL,” Proc. of SPIE Vol. 7271 727138-1, 2009.
[11]Junichi Fujimoto, Tsukasa Hori, Tatsuya Yanagida, Hakaru Mizoguchi, ”Development of Laser-Produced Tin Plasma-Based EUV Light
Source Technology for HVM EUV Lithography,” Physics Research International, Volume 2012, Article ID 249495, 11 pages.
[12] K. Nishihara, A. Sunahara, A. Sasaki, M. Nunami, H. Tanuma, S. Fujioka, Y. Shimada, K. Fujima, H. Furukawa, T. Kato, et al., ”Plasma physics and radiation hydrodynamics in developing an extreme ultraviolet light source for lithographya,” Physics of Plasmas (1994-present), vol. 15, no. 5, p. 056708, 2008.
[13] T. Sizyuk and A. Hassanein, ”Enhancing extreme ultraviolet photons emission in laser produced plasmas for advanced lithography,” Physics of Plasmas (1994 present), vol. 19, no. 8, p. 083102, 2012.
[14] T. Sizyuk and A. Hassanein, ”Optimization of extreme ultraviolet photons emission and collection in mass-limited laser produced plasmas for lithography application,” Journal of Applied Physics, vol. 112, no. 3, p. 033102, 2012.
[15] J. White, Opening the Extreme Ultraviolet Lithography Source Bottleneck: Developing a 13.5-nm Laser-produced Plasma Source for the Semiconductor Industry. PhD thesis, University College Dublin, 2006.
[16]Po-Yen Lai, ” Numerical study of laser-driven plasma spectroscopy and kinetic behavior of a collisional plasma: For application of a laser-produced Sn plasma extreme ultraviolet light source,” PhD thesis, National Central University,2016.
[17] S. Chapman and T. G. Cowling, The Mathematical Theory of Non-uniform Gases: An Account of the Kinetic Theory of Viscosity, Thermal Conduction and Diffusion of Gases, Notes Added in 1951. Cambridge university press, 1952.
[18] L. Spitzer Jr and R. Hrm,”Transport phenomena in a completely ionized gas,”Physical Review, vol. 89, no. 5, p. 977, 1953.
[19] T. W. Johnston and J. M. Dawson,”Correct values for high-frequency power absorption by inverse bremsstrahlung in plasmas,”Physics of Fluids (1958-1988), vol. 16, no. 5, pp. 722722, 1973.
[20] J. Huba,”Nrl plasma formulary supported by the office of naval research,”Naval Research Laboratory, 2013.
[21] A. Einstein,”Zur quantentheorie der strahlung,”Physikalische Zeitschrift, vol. 18, pp. 121-128, 1917.
[22] R. C. Hilborn,”Einstein coefficients, cross sections, f values, dipole moments, and all that,”arXiv preprint physics/0202029, 2002
[23] M. Busquet, M. Klapisch, and A. Bar-Shalom,”Absorption and emission proles of unresolved arrays near local thermodynamic equilibrium,”Journal of Quantitative Spectroscopy and Radiative Transfer, vol. 81, no. 1, pp. 255263, 2003.
[24] G. Wertheim, M. Butler, K. West, and D. Buchanan,”Determination of the gaussian and lorentzian content of experimental line shapes,”Review of Scientic Instruments, vol. 45, no. 11, pp. 1369-1371, 1974.
[25] A. Djaoui, ”A user guide for the laser-plasma simulation code: Med103,”1996.
[26] D. Colombant and G. Tonon,”X-ray emission in laser-produced plasmas,”Journal of Applied Physics, vol. 44, no. 8, pp. 3524-3537, 1973.
[27] R. McWhirter,”Plasma diagnostic techniques, edited by rh huddlestone and slleonard (academic, new york, 1965),”Chap, vol. 5, p. 208, 1965.
[28] G.Gupta and B.Sinha,”Parametric dependence of x-ray laser gain in laser plasmas for 3p-3s transitions in neon-like krypton ions, ”Journal of applied physics, vol. 77, no. 6, pp. 2287-2290, 1995.
[29] M. Itoh, T. Yabe, and S. Kiyokawa,”Collisional-radiative and average-ion hybrid models for atomic processes in high-z plasmas,”Physical Review A, vol. 35, no. 1, p. 233, 1987.
[30] S. Chandrasekhar, An introduction to the study of stellar structure, vol. 2. Courier Corporation, 1957.
[31] V. Sizyuk, A. Hassanein, and T. Sizyuk, ”Three-dimensional simulation of laser produced plasma for extreme ultraviolet lithography applications,” Journal of applied physics, vol. 100, no. 10, p. 103106, 2006.
[32] J. White, P. Dunne, P. Hayden, and G. OaeSullivan, ”Simplified one-dimensional calculation of 13.5 nm emission in a tin plasma including radiation transport,” Journal of Applied Physics, vol. 106, no. 11, p. 113303, 2009.
[33] J. Christiansen, D. Ashby, and K. Roberts, ”Medusa a one-dimensional laser fusion code,” Computer Physics Communications, vol. 7, no. 5, pp. 271-287, 1974.
[34] R. D. Cowan, The theory of atomic structure and spectra, vol. 3. Univ of California Press, 1981.
[35] A. Cummings, G. O′Sullivan, P. Dunne, E. Sokell, N. Murphy, and J. White, ”Conversion efficiency of a laser-produced Sn plasma at 13.5 nm, simulated with a one-dimensional hydrodynamic model and treated as a multi-component blackbody,” Journal of Physics D: Applied Physics, vol. 38, no. 4, p. 604, 2005.
[36] V. Sizyuk, A. Hassanein, V. Morozov, T. Sizyuk, et al., ”Heights integrated model as instrument for simulation of hydrodynamic, radiation transport, and heat conduction phenomena of laser-produced plasma in euv applications.,” tech. rep., Argonne National Laboratory (ANL), 2007.
[37]Christian Wagner, Noreen Harned, ”EUV lithography: Lithography gets extreme. ” Nature Photonics 4, 24 - 26 (2010)
[38] Y. Shimada, H. Nishimura, M. Nakai, K. Hashimoto, M. Yamaura, Y. Tao, K. Shigemori, T. Okuno, K. Nishihara, T. Kawamura, et al., “Characterization of extreme ultraviolet emission from laser-produced spherical tin plasma generated with multiple laser beams,”Applied Physics Letters, vol. 86, no. 5, p. 051501, 2005.
[39] Katsunobu Nishihara, Atsushi Sunahara, Akira Sasaki, Masanori Nunami, Hajime Tanuma, et al., ”Plasma physics and radiation hydrodynamics in developing an extreme ultraviolet light source for lithography” Phys Plasmas 15, 056708, 2008
[40] Shinsuke FUJIOKA, Hiroaki NISHIMURA, Katsunobu NISHIHARA, Noriaki MIYANAGA, Yasukazu IZAWA, Kunioki MIMA, Yoshinori SHIMADA, Atsushi SUNAHARA, “Laser Production of Extreme Ultraviolet Light Source for the Next Generation Lithography Application,” Plasma and Fusion Research, Vol. 4, p. 048, 2009. |
[Endnote RIS 格式]
[相關文章]
[文章引用]
[完整記錄]
[館藏目錄]
[檢視]
plurk
funp
live
udn
HD
myshare
netvibes
friend
youpush
delicious
baidu
Google bookmarks
del.icio.us
hemidemi
facebook
twitter
google
reddit