| 摘要(英) |
In recent years, wearable electronics has brought a lot of attentions due to its potential applications and advantages of miniature, light weight, and transparency. However, there were still many problems in common transparent thin film. Therefore, it is stringent for the research of new materials.
This study focuses on the preparation of p-type zinc oxide target and thin film, as well as the development of other new conductive materials, including chrome trioxide and copper sulfide. Several doping species and process was conducted and the analysis on the materials properties was carried out for thorough study. |
| 參考文獻 |
﹝1﹞蔡金津、侯維新,“國際軟性電子技術最新發展”，工業材料雜誌 256 期
﹝2﹞黃桂武,“軟性電子主動元件材料技術發展現況(上)”，工業材料雜誌 263 期
﹝3﹞林偉祺,“水溶液法成長氧化鋅薄膜及其薄膜電晶體製作”, 國立交通大學工學 院專班半導體材料與製程設備組碩士論文
﹝4﹞何建志,“摻雜鋁之 p-type 氧化鋅薄膜特性分析”,國立台北科技大學光電工程 學系碩士論文(2007)
﹝5﹞林鴻明,奈米材料合成技術,大同大學工業工程學系,奈米課程材料教材,1- 5(2003)
﹝6﹞光洋應用材料科技股份有限公司,“粉末冶金”熱壓成形(2008)
﹝7﹞蔡岳雲,“二維薄膜及三維塊材 Seebeck 係數量測”,國立中央大學電機工程學系碩士班論文(2015)
﹝8﹞江泰真空,“真空燒結設備”
﹝9﹞劉修豪,“金屬氧化物製備應用於軟性電子元件”,國立中央大學電機工程學系碩士班論文(2016)
﹝10﹞Xiaojie Xu, “Chemical Bath Deposition of p?Type Transparent, Highly Conducting (CuS)x:(ZnS)1?x Nanocomposite Thin Films
and Fabrication of Si Heterojunction Solar cells”, ACS Publications.
﹝11﹞林麗娟,“X 光繞射原理及其應用”,工業材料 86 期,P100-P109 (1994)
﹝12﹞B.J. Inkson, “2 – Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) for materials characterization,” Materials Characterization Using Nondestructive Evaluation (NDE) Methods, PP. 17-43, 2016.
﹝13﹞P. Sigmund, “Theory of Sputtering. I. Sputtering Yield of Amorphous and Polycrystalline Targets,” Phys. Rev., Vol. 184, Iss. 2, pp. 383-416, 1969.
﹝14﹞M.M. Can,S. I. Shah, T. Firat,“The formation of anomalous Hall effectdepending on Watoms in Znothin films,”Appl. Surf. Sci.,Vol. 303, PP. 76-83, 2014. |
[Endnote RIS 格式]
[相關文章]
[文章引用]
[完整記錄]
[館藏目錄]
至系統瀏覽論文 ( 永不開放)
plurk
funp
live
udn
HD
myshare
netvibes
friend
youpush
delicious
baidu
Google bookmarks
del.icio.us
hemidemi
facebook
twitter
google
reddit