博碩士論文 104326020 詳細資訊




以作者查詢圖書館館藏 以作者查詢臺灣博碩士 以作者查詢全國書目 勘誤回報 、線上人數:26 、訪客IP:3.145.52.182
姓名 吳峻華(Chun-Hua Wu)  查詢紙本館藏   畢業系所 環境工程研究所
論文名稱 運用金奈米粒子/幾丁聚醣-單壁奈米碳管修飾玻璃碳電極進行水中銅之伏安法分析
(Determination of Copper by Voltammetry Using Gold Nanoparticles/Chitosan-Single-Walled Carbon Nanotubes Modified Glassy Carbon Electrode)
相關論文
★ 偏光板TAC製程節水研究★ 應用碳足跡盤查於節能減碳策略之研究-以某太陽能多晶矽片製造廠為例
★ 不同形態擔體對流動式接觸床 (MBBR)去除氨氮效率之探討★ 以減壓蒸發法回收光阻廢液之可行性探討-以某化學材料製造廠為例
★ 行為安全執行策略探討-以某紡絲事業單位為例★ 以環保溶劑取代甲苯應用於工業用接著劑可行性之研究
★ AO+MBR+RO進行生活污水廠水再生最佳調配比例之研究-以鳳山溪污水處理廠為例★ 二氧化矽與氧化鋁廢水混合混凝處理之研究
★ 利用碳氣凝膠紙電吸附於二氯化銅水溶液現象之探討★ 非接觸式光學監測混凝系統技術之發展
★ 以光學影像連續監測銅廢水化學沉降之技術發展★ 以膠羽影像光訊號分析(FICA)技術監測高嶺土之化學混凝
★ 膠羽影像色譜分析技術 監測混凝程序之開發‒以地表原水為例★ 石門水庫分層取水對於前加氯與混凝成效之影響
★ 石門水庫分層取水對於平鎮淨水廠快濾池堵塞成因分析★ 地表水中氨氮之生物急毒性研究
檔案 [Endnote RIS 格式]    [Bibtex 格式]    [相關文章]   [文章引用]   [完整記錄]   [館藏目錄]   [檢視]  [下載]
  1. 本電子論文使用權限為同意立即開放。
  2. 已達開放權限電子全文僅授權使用者為學術研究之目的,進行個人非營利性質之檢索、閱讀、列印。
  3. 請遵守中華民國著作權法之相關規定,切勿任意重製、散佈、改作、轉貼、播送,以免觸法。

摘要(中) 重金屬污染水體受矚目已久,銅(Cu)雖為微量元素,被攝入至生物體中卻會造成肝、腎及神經系統等疾病,對人體及環境皆有嚴重危害性,因此,開發快速及精確之Cu量測技術相當具有潛力。本研究利用電鍍沉積法製備金奈米粒子/幾丁聚醣-單壁奈米碳管複合材料修飾玻璃碳電極(Au/Chitosan-SWCNT/GCE)對水中Cu(II)進行伏安法分析。由於金奈米粒子具有高親和力和電催化活性及幾丁聚醣良好的成膜能力與黏附性可有效提高單壁奈米碳管的反應特性及分析靈敏度。研究結果顯示電極最佳製備參數為:電鍍電位-0.6 V、電鍍濃度0.5 mM、電鍍時間300秒、幾丁聚醣濃度0.1% ;而Cu(II)分析最佳掃描條件為:電解液0.1 M、掃描速率0.2Vs-1,偵測極限為3.24 ppb。此外,本研究亦添加其他重金屬Pb(II)、Cr(III)、Cr(VI)、As(III)、As(V)、Zn(II)、Cd(II)和Fe(III)做干擾試驗,探討添加不同金屬對Cu(II) 伏安法分析之影響,結果顯示除了Pb(II)和As(III),其他金屬與Cu(II)同時存在於水中並不會影響Cu(II)的峰電流值(誤差值皆小於10%),而Pb(II)和As(III)則會使Cu(II)之峰電流值上升,干擾伏安法量測Cu(II)之準確性,推測原因為Pb(II)和As(III)會與幾丁聚醣進行反應,使幾丁聚醣除捕捉Cu(II)外,亦同時捕捉Pb(II)或As(III)造成峰電流值提升。本研究之修飾電極對於檢測銅具有製備快速、操作簡單、高靈敏度等優點,可應用於環境監測,進而達到迅速掌握水質狀況與偵測污染排放之效果。
摘要(英) Heavy metal pollution in aquatic environment has drawn great attention for years. Though copper (Cu) is a trace element, also has toxic effects on human health and environment. Therefore, developing a fast and accurate sensor for Cu analysis is important. In this study, the gold nanoparticles/chitosan-single walled nanotubes modified glassy carbon electrode (Au/chitosan-SWCNT/GCE) was prepared for detection of Cu(II). The liner-sweep voltammetry method (LSV) was used to analyze Cu(II) and the gold nanoparticles were deposited on the single-walled nanotube through electroplating for enhance the reactivity of electrode. The optimum electroplating conditions of electrode preparation were -0.6 V, 0.5 mM HAuCl4, 300 s, and 0.1% chitosan. Besides, the optimum conditions of scanning Cu(II) were 0.1 M HCl (supporting electrolyte) with scan rate of 0.2 Vs-1. The range of scan potential was from 1.0 to -0.6 V and the detection limit of Cu(II) was 3.24 ppb. The interferences of Pb(II), Cr(III), Cr(VI), As(III), As(V), Zn(II), Cd(II), and Fe(III) ions were also investigated. The results indicated that, except Pb(II) and As(III) , the metal ions used in this work had no effects on the peak current of Cu (error less than 10%). However, Pb(II) and As(III) increased the peak current of Cu, it might be because that both metals could also chelate with chitosan. The Au/chitosan-SWCNT/GCE prepared in this study presents lots of attractive features for Cu(II) detection, such as simple preparation method, high sensitivity, good reproducibility, low detection limit, and quick current response. Thus, the modified electrode may be an available sensor for Cu(II) analysis via LSV and applied in environmental pollutant monitoring.
關鍵字(中) ★ 金奈米粒子
★ 銅
★ 幾丁聚醣
★ 單壁奈米碳管
★ 伏安法
關鍵字(英) ★ Gold nanoparticles
★ copper
★ chitosan
★ single-walled carbon nanotubes
★ voltammetry
論文目次 Content
摘要 I
Abstract II
致謝 IV
Content V
List of Figures VII
List of Tables IX
Chapter 1 1
1.1. Background 1
1.2. Objectives 2
Chapter 2 4
2.1.1. Voltammetry 4
2.1.1. Electrochemical system 4
2.1.2. Principle of voltammetry 6
2.2. Carbon nanotubes (CNT) 12
2.2.1. Characteristics of carbon nanotubes 12
2.2.2. Purification of carbon nanotubes 13
2.2.3. Carbon nanotube electrode for electrochemical analysis 17
2.2.4. Carbon nanotube composites electrode for determination of heavy metal 17
2.3. Chitosan 19
2.3.1. Characteristics of chitosan 20
2.3.2. Material of chitosan / AuNPs 22
2.3.3. Application of chitosan/AuNPs composites electrode for electrochemical sensors 23
Chapter 3 26
3.1. Materials 26
3.1.1. Chemicals 26
3.1.2. Instrumentation 27
3.2. Preparation of modified electrode 28
3.2.1. Pretreatment of SWCNT 28
3.2.2. Preparation of Chitosan-SWCNT/GCE 29
3.2.3. Preparation of Au/Chitosan-SWCNT/GCE 29
3.2.4. Characterization of modified electrodes 29
3.4. Voltammetric analysis 30
3.4.1. Determination of scanning condition 30
3.4.2. Interference analysis 31
Chapter 4 32
4.1. Characterization of Au/Chitosan-SWCNT 32
4.1.1. Microscopic morphology of Au/Chitosan-SWCNT 32
4.1.2. Surface functional groups on Au/chitosan-SWCNT 34
4.2. Optimal preparation conditions of Au/chitosan-SWCNT/GCE 36
4.3. Scanning conditions of Cu(II) 43
4.4. Voltammetric analysis of Cu(II) 48
4.5. Interference study 53
Chapter 5 64
5.1. Conclusion 64
5.2. Suggestions 66
References 67
參考文獻 References
Al-Sagheer, F., and Merchant, S.,"Visco-elastic properties of chitosan–titania nano-composites", Carbohydrate polymers, 85, 356-362(2011).
Anandhakumar, S., and Mathiyarasu, J.,"Detection of lead (II) using an glassy carbon electrode modified with Nafion, carbon nanotubes and benzo-18-crown-6", Microchimica Acta, 180, 1065-1071(2013).
Anthonsen, M.W., and Smidsrød, O.,"Hydrogen ion titration of chitosans with varying degrees of N-acetylation by monitoring induced 1H-NMR chemical shifts", Carbohydrate Polymers, 26, 303-305(1995).
Ashkenani, H., and Taher, M.A.,"Selective voltammetric determination of Cu (II) based on multiwalled carbon nanotube and nano-porous Cu-ion imprinted polymer", Journal of Electroanalytical Chemistry, 683, 80-87(2012).
Bai, J., Zhang, X., Peng, Y., Hong, X., Liu, Y., Jiang, S., Ning, B., and Gao, Z.,"Ultrasensitive sensing of diethylstilbestrol based on AuNPs/MWCNTs-CS composites coupling with sol-gel molecularly imprinted polymer as a recognition element of an electrochemical sensor", Sensors and Actuators B: Chemical, 238, 420-426(2017).
Balasubramanian, K., and Burghard, M.,"Electrochemically functionalized carbon nanotubes for device applications", Journal of Materials Chemistry, 18, 3071-3083(2008).
Bard, A.J., and Faulkner, L.R.,"Fundamentals and Applications, New York: Wiley, 2001", (2002).
Boca, S.C., Potara, M., Toderas, F., Stephan, O., Baldeck, P.L., and Astilean, S.,"Uptake and biological effects of chitosan-capped gold nanoparticles on Chinese Hamster Ovary cells", Materials Science and Engineering: C, 31, 184-189(2011).
Bonard, J.M., Stora, T., Salvetat, J.P., Maier, F., Stöckli, T., Duschl, C., Forró, L., de Heer, W.A., and Châtelain, A.,"Purification and size‐selection of carbon nanotubes", Advanced Materials, 9, 827-831(1997).
Brown, A.P., and Anson, F.C.,"Cyclic and differential pulse voltammetric behavior of reactants confined to the electrode surface", Analytical Chemistry, 49, 1589-1595(1977).
Chen, L., Su, Z., He, X., Liu, Y., Qin, C., Zhou, Y., Li, Z., Wang, L., Xie, Q., and Yao, S.,"Square wave anodic stripping voltammetric determination of Cd and Pb ions at a Bi/Nafion/thiolated polyaniline/glassy carbon electrode", Electrochemistry Communications, 15, 34-37(2012).
Cheung, W., Pontoriero, F., Taratula, O., Chen, A.M., and He, H.,"DNA and carbon nanotubes as medicine", Advanced drug delivery reviews, 62, 633-649(2010).
Ciftci, H., Tamer, U., Metin, A.U., Alver, E., and Kizir, N.,"Electrochemical copper (II) sensor based on chitosan covered gold nanoparticles", Journal of Applied Electrochemistry, 44, 563-571(2014).
Cui, F., and Zhang, X.,"Electrochemical sensor for epinephrine based on a glassy carbon electrode modified with graphene/gold nanocomposites", Journal of Electroanalytical Chemistry, 669, 35-41(2012).
Dai, X., Nekrassova, O., Hyde, M.E., and Compton, R.G.,"Anodic stripping voltammetry of arsenic (III) using gold nanoparticle-modified electrodes", Analytical chemistry, 76, 5924-5929(2004).
Dalmasso, P.R., Pedano, M.L., and Rivas, G.A.,"Dispersion of multi-wall carbon nanotubes in polyhistidine: Characterization and analytical applications", Analytica chimica acta, 710, 58-64(2012).
Dalmasso, P.R., Pedano, M.L., and Rivas, G.A.,"Electrochemical Determination of Cu(II) Using a Glassy Carbon Electrode Modified with Multiwall Carbon Nanotubes Dispersed in Polyhistidine", Electroanalysis, 27, 2164-2170(2015).
de Alvarenga, E.S.,"Characterization and properties of chitosan", Biotechnology of biopolymers, (2011).
Ebbesen, T.W.,"Carbon nanotubes", Annual review of materials science, 24, 235-264(1994).
Ensafi, A.A., and Karimi‐Maleh, H.,"Determination of 6‐mercaptopurine in the presence of uric acid using modified multiwall carbon nanotubes‐TiO2 as a voltammetric sensor", Drug testing and analysis, 4, 970-977(2012).
Esumi, K., Takei, N., and Yoshimura, T.,"Antioxidant-potentiality of gold–chitosan nanocomposites", Colloids and Surfaces B: Biointerfaces, 32, 117-123(2003).
Feng, D., Wang, F., and Chen, Z.,"Electrochemical glucose sensor based on one-step construction of gold nanoparticle–chitosan composite film", Sensors and Actuators B: Chemical, 138, 539-544(2009).
Fu, X.C., Wu, J., Li, J., Xie, C.G., Liu, Y.S., Zhong, Y., and Liu, J.H.,"Electrochemical determination of trace copper(II) with enhanced sensitivity and selectivity by gold nanoparticle/single-wall carbon nanotube hybrids containing three-dimensional L-cysteine molecular adapters", Sensors and Actuators B-Chemical, 182, 382-389(2013).
Guibal, E.,"Interactions of metal ions with chitosan-based sorbents: a review", Separation and Purification Technology, 38, 43-74(2004).
Guo, Z., Luo, X.-k., Li, Y.-h., Zhao, Q.-N., Li, M.-m., Zhao, Y.-t., Sun, T.-s., and Ma, C.,"Simultaneous determination of trace Cd (II), Pb (II) and Cu (II) by differential pulse anodic stripping voltammetry using a reduced graphene oxide-chitosan/poly-l-lysine nanocomposite modified glassy carbon electrode", Journal of colloid and interface science, 490, 11-22(2017).
He, J., and Kunitake, T.,"Preparation and thermal stability of gold nanoparticles in silk-templated porous filaments of titania and zirconia", Chemistry of materials, 16, 2656-2661(2004).
He, X., Yuan, R., Chai, Y., and Shi, Y.,"A sensitive amperometric immunosensor for carcinoembryonic antigen detection with porous nanogold film and nano-Au/chitosan composite as immobilization matrix", Journal of biochemical and biophysical methods, 70, 823-829(2008).
Holloway, A.F., Wildgoose, G.G., Compton, R.G., Shao, L., and Green, M.L.,"The influence of edge-plane defects and oxygen-containing surface groups on the voltammetry of acid-treated, annealed and “super-annealed” multiwalled carbon nanotubes", Journal of Solid State Electrochemistry, 12, 1337(2008).
Huang, H., and Yang, X.,"Synthesis of chitosan-stabilized gold nanoparticles in the absence/presence of tripolyphosphate", Biomacromolecules, 5, 2340-2346(2004).
Huang, K.-J., Niu, D.-J., Xie, W.-Z., and Wang, W.,"A disposable electrochemical immunosensor for carcinoembryonic antigen based on nano-Au/multi-walled carbon nanotubes–chitosans nanocomposite film modified glassy carbon electrode", Analytica chimica acta, 659, 102-108(2010).
Iijima, S.,"Helical microtubules of graphitic carbon", nature, 354, 56(1991).
Iijima, S., and Ichihashi, T.,"Single-shell carbon nanotubes of 1-nm diameter", nature, 363, 603-605(1993).
Ijeri, V.S., and Srivastava, A.K.,"Voltammetric determination of lead at chemically modified electrodes based on crown ethers", Analytical sciences, 17, 605-608(2001).
Jin, Y., Li, Z., Hu, L., Shi, X., Guan, W., and Du, Y.,"Synthesis of chitosan-stabilized gold nanoparticles by atmospheric plasma", Carbohydrate polymers, 91, 152-156(2013).
Kachoosangi, R.T., and Compton, R.G.,"Voltammetric determination of Chromium (VI) using a gold film modified carbon composite electrode", Sensors and Actuators B: Chemical, 178, 555-562(2013).
Kerric, G., Parra, E.J., Crespo, G.A., Rius, F.X., and Blondeau, P.,"Nanostructured assemblies for ion-sensors: functionalization of multi-wall carbon nanotubes with benzo-18-crown-6 for Pb 2+ determination", Journal of Materials Chemistry, 22, 16611-16617(2012).
Kharian, S., Teymoori, N., and Khalilzadeh, M.A.,"Multi-wall carbon nanotubes and TiO2 as a sensor for electrocatalytic determination of epinephrinein the presence of p-chloranil as a mediator", Journal of Solid State Electrochemistry, 16, 563-568(2012).
Klug, M., Sanches, M.N., Laranjeira, M.C., Favere, V.T., and Rodrigues, C.A.,"ANALISE DAS ISOTERMAS DE ADSORCAO DE Cu (II),(_Id (II),~ Ni (II) E Zn (II) PELA N-(3, 4-DIHIDROXIBENZIL) QUITOSANA EMPREGANDO O METODO DA REGRESSAO NAO LINEAR", Química Nova, 21, 4(1998).
Kokkinos, C., and Economou, A.,"Disposable Nafion-modified micro-fabricated bismuth-film sensors for voltammetric stripping analysis of trace metals in the presence of surfactants", Talanta, 84, 696-701(2011).
Kruusenberg, I., Alexeyeva, N., Tammeveski, K., Kozlova, J., Matisen, L., Sammelselg, V., Solla-Gullón, J., and Feliu, J.M.,"Effect of purification of carbon nanotubes on their electrocatalytic properties for oxygen reduction in acid solution", Carbon, 49, 4031-4039(2011).
Kubota, N., Tatsumoto, N., Sano, T., and Toya, K.,"A simple preparation of half N-acetylated chitosan highly soluble in water and aqueous organic solvents", Carbohydrate Research, 324, 268-274(2000).
Kurita, K.,"Chitin and chitosan: functional biopolymers from marine crustaceans", Marine Biotechnology, 8, 203(2006).
Lee, C., Wei, X., Kysar, J.W., and Hone, J.,"Measurement of the elastic properties and intrinsic strength of monolayer graphene", science, 321, 385-388(2008).
Lei, L., Cao, Z., Xie, Q., Fu, Y., Tan, Y., Ma, M., and Yao, S.,"One-pot electrodeposition of 3-aminopropyltriethoxysilane–chitosan hybrid gel film to immobilize glucose oxidase for biosensing", Sensors and Actuators B: Chemical, 157, 282-289(2011).
Liu, M., Feng, Y.H., Zhang, C.H., Wang, G.F., and Fang, B.,"Electrochemical determination of copper(II) using co-poly (cupferron and beta-naphthol)/gold nanoparticles modified glassy carbon electrodes", Analytical Methods, 3, 1595-1600(2011).
Liu, X., Hu, Q., Fang, Z., Zhang, X., and Zhang, B.,"Magnetic chitosan nanocomposites: a useful recyclable tool for heavy metal ion removal", Langmuir, 25, 3-8(2008).
Liu, Z.-G., and Huang, X.-J.,"Voltammetric determination of inorganic arsenic", TrAC Trends in Analytical Chemistry, 60, 25-35(2014).
Liu, Z.-Q., Ma, J., Cui, Y.-H., Zhao, L., and Zhang, B.-P.,"Influence of different heat treatments on the surface properties and catalytic performance of carbon nanotube in ozonation", Applied Catalysis B: Environmental, 101, 74-80(2010).
Lou, T., Pan, D., Wang, Y., Jiang, L., and Qin, W.,"Carbon Nanotubes/Ionophore modified electrode for anodic stripping determination of lead", Analytical Letters, 44, 1746-1757(2011).
Lu, X., Hu, J., Yao, X., Wang, Z., and Li, J.,"Composite system based on chitosan and room-temperature ionic liquid: direct electrochemistry and electrocatalysis of hemoglobin", Biomacromolecules, 7, 975-980(2006).
Lu, Z., Yang, S., Yang, Q., Luo, S., Liu, C., and Tang, Y.,"A glassy carbon electrode modified with graphene, gold nanoparticles and chitosan for ultrasensitive determination of lead (II)", Microchimica Acta, 180, 555-562(2013).
Mabbott, G.A.,"An introduction to cyclic voltammetry", J. Chem. Educ, 60, 697(1983).
Mao, A., Li, H., Cai, Z., and Hu, X.,"Determination of mercury using a glassy carbon electrode modified with nano TiO 2 and multi-walled carbon nanotubes composites dispersed in a novel cationic surfactant", Journal of Electroanalytical Chemistry, 751, 23-29(2015).
Mottaghitalab, V., Spinks, G.M., and Wallace, G.G.,"The influence of carbon nanotubes on mechanical and electrical properties of polyaniline fibers", Synthetic Metals, 152, 77-80(2005).
Musameh, M., Wang, J., Merkoci, A., and Lin, Y.,"Low-potential stable NADH detection at carbon-nanotube-modified glassy carbon electrodes", Electrochemistry Communications, 4, 743-746(2002).
Nilsen-Nygaard, J., Strand, S.P., Vårum, K.M., Draget, K.I., and Nordgård, C.T.,"Chitosan: Gels and interfacial properties", Polymers, 7, 552-579(2015).
Oldham, K.B.,"Analytical expressions for the reversible Randles-Sevcik function", Journal of Electroanalytical Chemistry and Interfacial Electrochemistry, 105, 373-375(1979).
Ottøy, M.H., Vårum, K.M., Christensen, B.E., Anthonsen, M.W., and Smidsrød, O.,"Preparative and analytical size-exclusion chromatography of chitosans", Carbohydrate Polymers, 31, 253-261(1996).
Ou, K.-L., Yu, C.-C., Liu, Y.-C., Yang, K.-H., Wang, C.-C., and Chen, Q.-Y.,"Sonoelectrochemical synthesis of chitosan/gold nanocomposites for application in removing toxic materials in mainstream smokes", Materials Research Bulletin, 46, 2333-2337(2011).
Pan, B., and Xing, B.,"Adsorption mechanisms of organic chemicals on carbon nanotubes", Environmental science & technology, 42, 9005-9013(2008).
Parra, E.J., Blondeau, P., Crespo, G.A., and Rius, F.X.,"An effective nanostructured assembly for ion-selective electrodes. An ionophore covalently linked to carbon nanotubes for Pb 2+ determination", Chemical Communications, 47, 2438-2440(2011).
Peter, M.G.,"Chitin and chitosan from animal sources", Biopolymers online, (2005).
Prakash, S., Chakrabarty, T., Singh, A.K., and Shahi, V.K.,"Silver nanoparticles built-in chitosan modified glassy carbon electrode for anodic stripping analysis of As (III) and its removal from water", Electrochimica Acta, 72, 157-164(2012).
Qi, Z.-m., Zhou, H.-s., Matsuda, N., Honma, I., Shimada, K., Takatsu, A., and Kato, K.,"Characterization of gold nanoparticles synthesized using sucrose by seeding formation in the solid phase and seeding growth in aqueous solution", The Journal of Physical Chemistry B, 108, 7006-7011(2004).
Rahmi, Lelifajri, Julinawati, and Shabrina."Preparation of chitosan composite film reinforced with cellulose isolated from oil palm empty fruit bunch and application in cadmium ions removal from aqueous solutions", CARBOHYDRATE POLYMERS, 170, 226-233(2017).
Rinaudo, M.,"Chitin and chitosan: properties and applications", Progress in polymer science, 31, 603-632(2006).
Rosca, I.D., Watari, F., Uo, M., and Akasaka, T.,"Oxidation of multiwalled carbon nanotubes by nitric acid", Carbon, 43, 3124-3131(2005).
Saha, S., and Sarkar, P.,"Differential pulse anodic stripping voltammetry for detection of As (III) by Chitosan-Fe (OH) 3 modified glassy carbon electrode: A new approach towards speciation of arsenic", Talanta, 158, 235-245(2016).
Salimi, A., Pourbahram, B., Mansouri-Majd, S., and Hallaj, R.,"Manganese oxide nanoflakes/multi-walled carbon nanotubes/chitosan nanocomposite modified glassy carbon electrode as a novel electrochemical sensor for chromium (III) detection", Electrochimica Acta, 156, 207-215(2015).
Salinas-Torres, D., Huerta, F., Montilla, F., and Morallón, E.,"Study on electroactive and electrocatalytic surfaces of single walled carbon nanotube-modified electrodes", Electrochimica Acta, 56, 2464-2470(2011).
Sankararamakrishnan, N., and Sanghi, R.,"Preparation and characterization of a novel xanthated chitosan", Carbohydrate Polymers, 66, 160-167(2006).
Sastry, M., Ahmad, A., Khan, M.I., and Kumar, R.,"Biosynthesis of metal nanoparticles using fungi and actinomycete", Current science, 85, 162-170(2003).
Shen, Q., You, S.K., Park, S.G., Jiang, H., Guo, D., Chen, B., and Wang, X.,"Electrochemical biosensing for cancer cells based on TiO2/CNT nanocomposites modified electrodes", Electroanalysis, 20, 2526-2530(2008).
Staroszczyk, H., Sztuka, K., Wolska, J., Wojtasz-Pająk, A., and Kołodziejska, I.,"Interactions of fish gelatin and chitosan in uncrosslinked and crosslinked with EDC films: FT-IR study", Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy, 117, 707-712(2014).
Tohji, K., Goto, T., Takahashi, H., and Shinoda, Y.,"Purifying single-walled nanotubes", Nature, 383, 679(1996).
Wan, H., Sun, Q., Li, H., Sun, F., Hu, N., and Wang, P.,"Screen-printed gold electrode with gold nanoparticles modification for simultaneous electrochemical determination of lead and copper", Sensors and Actuators B: Chemical, 209, 336-342(2015).
Wang, J., Li, M., Shi, Z., Li, N., and Gu, Z.,"Electrocatalytic oxidation of norepinephrine at a glassy carbon electrode modified with single wall carbon nanotubes", Electroanalysis, 14, 225-230(2002).
Wang, J., Lu, J., Hocevar, S.B., Farias, P.A., and Ogorevc, B.,"Bismuth-coated carbon electrodes for anodic stripping voltammetry", Analytical chemistry, 72, 3218-3222(2000).
Wang, J., Yin, G.-P., Zhang, J., Wang, Z., and Gao, Y.,"High utilization platinum deposition on single-walled carbon nanotubes as catalysts for direct methanol fuel cell", Electrochimica Acta, 52, 7042-7050(2007).
Wei, D., Qian, W., Shi, Y., Ding, S., and Xia, Y.,"Effects of cooling treatment and glutaraldehyde on the morphology of Au nanostructures synthesized from chitosan", Carbohydrate research, 343, 512-520(2008).
Wei, D., Ye, Y., Jia, X., Yuan, C., and Qian, W.,"Chitosan as an active support for assembly of metal nanoparticles and application of the resultant bioconjugates in catalysis", Carbohydrate research, 345, 74-81(2010).
Wu, K., Hu, S., Fei, J., and Bai, W.,"Mercury-free simultaneous determination of cadmium and lead at a glassy carbon electrode modified with multi-wall carbon nanotubes", Analytica Chimica Acta, 489, 215-221(2003).
Xie, X.-L., Mai, Y.-W., and Zhou, X.-P.,"Dispersion and alignment of carbon nanotubes in polymer matrix: a review", Materials Science and Engineering: R: Reports, 49, 89-112(2005).
Zhang, M., Smith, A., and Gorski, W.,"Carbon nanotube− chitosan system for electrochemical sensing based on dehydrogenase enzymes", Analytical Chemistry, 76, 5045-5050(2004).
Zhang, S.-B., Wu, Z.-S., Guo, M.-M., Shen, G.-L., and Yu, R.-Q.,"A novel immunoassay strategy based on combination of chitosan and a gold nanoparticle label", Talanta, 71, 1530-1535(2007).
Zhao-sheng, C., Chun-sheng, Y., and Xue-mei, Z.,"Synthesis of 3-Dehydroabietylamino-2-Hydroxypropyl Trimethylammonium Chloride and its Antibacterial Activity", Tenside Surfactants Detergents, 47, 24-27(2010).
Zhou, S.-F., Han, X.-J., and Liu, Y.-Q.,"SWASV performance toward heavy metal ions based on a high-activity and simple magnetic chitosan sensing nanomaterials", Journal of Alloys and Compounds, 684, 1-7(2016).
Zhou, Y., Yang, H., and Chen, H.-Y.,"Direct electrochemistry and reagentless biosensing of glucose oxidase immobilized on chitosan wrapped single-walled carbon nanotubes", Talanta, 76, 419-423(2008).

周貝倫, "純化程序對奈米碳管表面特性影響之研究", 碩士論文,國立中央大學環境工程研究所, 桃園, (2006)
成會明, "奈米碳管", 五南圖書出版社,(2004)
洪昭南, 徐逸明 and 王宏達, "奈米碳管結構及特性簡介", 化工, 第49卷,第一期, 23-30, (2002)
胡啟章, "電化學原理與方法", 五南圖書出版社, (2011)
格里第 and 鲜祺振, "電極動力學", 財團法人徐氏基金會, (1996)
黃喬渝, "單壁奈米碳管修飾電極對硝基酚和銅之電化學分析", 碩士論文,國立中央大學環境工程研究所, 桃園, (2004)
廖淑君, "運用單壁奈米碳管與鉍奈米粒子/單壁奈米碳管修飾玻璃碳電極進行鉛之伏安法分析", 碩士論文,國立中央大學環境工程研究所, 桃園, (2017)
歐陽姍佩, "鹼性溶液中鎳大環錯鹽聚合膜修飾電極對甲醇及苯甲醇之氧化電處行為研究",碩士論文,國立台南師範學院自然科學教育學系,台南, (2004)
謝曉婕, "運用金奈米粒子單壁奈米碳管電極進行水中鉻物種之伏安法分析", 碩士論文,國立中央大學環境工程研究所, 桃園, (2017)
環保署環境檢驗所, "運用奈米碳管修飾電極進行水質分析(4/4)-重金屬物種分析技術研究", (2016).
http://www.periodic-table.org.uk/
http://www.ceb.cam.ac.uk/, University of Cambridge
指導教授 秦靜如 審核日期 2017-11-17
推文 facebook   plurk   twitter   funp   google   live   udn   HD   myshare   reddit   netvibes   friend   youpush   delicious   baidu   
網路書籤 Google bookmarks   del.icio.us   hemidemi   myshare   

若有論文相關問題,請聯絡國立中央大學圖書館推廣服務組 TEL:(03)422-7151轉57407,或E-mail聯絡  - 隱私權政策聲明