姓名 |
謝長興(CHANG-HSING HSIEH)
查詢紙本館藏 |
畢業系所 |
機械工程學系在職專班 |
論文名稱 |
應用於光學玻璃之熱壓成型後玻璃表面霧化現象之研究 (Research on Atomization on Glass Surface after Hot Press Molding Optical Glass)
|
相關論文 | |
檔案 |
[Endnote RIS 格式]
[Bibtex 格式]
[相關文章] [文章引用] [完整記錄] [館藏目錄] [檢視] [下載]- 本電子論文使用權限為同意立即開放。
- 已達開放權限電子全文僅授權使用者為學術研究之目的,進行個人非營利性質之檢索、閱讀、列印。
- 請遵守中華民國著作權法之相關規定,切勿任意重製、散佈、改作、轉貼、播送,以免觸法。
|
摘要(中) |
本文主要研究厚6mm薄型光學玻璃與石墨模具經過熱壓製程後光學玻璃的表面霧化現象。通過固定的成型時間(formed time);成型壓力(formed pressure)和變化的成型溫度(formed temperature);石墨模具設計(graphite design)等,探討關鍵熱壓成型參數對於熱壓後玻璃表面霧化的影響。透過量測石墨模具加熱時的各點溫度以及觀察光學玻璃與石墨模具使用曲面熱壓成型機後光學玻璃表面的品質,可以得到成型溫度的均勻性以及模具表面處理對於光學玻璃表面的霧化現象影響最大的結論。另外我們也觀察到在熱壓成型試驗後的光學玻璃發生霧化現象的位置在皆在玻璃表面的中間處而非隨機處的現象可以推斷熱均勻性會影響霧化的結果,在適當的成型溫度中霧化現象只受到熱均勻性以及模具設計與表面處理影響,這一點可以由本研究的試驗成果得到印證。 |
摘要(英) |
In this paper, the studying of the surface atomization phenomenon after thermal bending formed process between the optical glass that with the thickness of 6mm and graphite mold characteristics, especially in the fixed the formed time; formed pressure and change the formed temperature; graphite mold design, and the key thermal bending formed parameters are affected for the surface atomization of optical glass after thermal bending formed process. Through the temperature measurement meter to measure surface temperature of graphite mold at each point after we heating graphite mold, and we can observe the optical glass surface phenomenon after optical glass and graphite mold complete thermal bending formed process and obtain the result by the effect of the uniformity of the forming temperature and the mold surface treatment on the atomization phenomenon of the optical glass surface…In addition, it is observed that the optical glass atomization phenomenon after thermal bending formed occur in the middle of glass instead of at the random location and we can infer thermal uniformity have obvious effect for the atomization phenomenon. The atomization phenomenon is only affected by the thermal uniformity and
graphite design and surface plating in the appropriate forming temperature, which can be determined by the test result.
|
關鍵字(中) |
★ 熱壓成型 |
關鍵字(英) |
|
論文目次 |
目錄
中文摘要 i
ABSTRACT ii
誌 謝 iii
圖目錄 v
表說明 vii
第一章 緒論 1
1-1 曲面光學玻璃應用 1
1-2 光學玻璃熱壓成型 3
1-3 研究動機 9
第二章 實驗規劃 11
2-1 實驗設計 11
2-2 實驗設備 15
2-3 實驗步驟 20
第三章 實驗結果分析 21
3-1不同溫度參數與模具的玻璃熱壓成型結果 21
3-2不同溫度參數與不同設計下石墨模具的熱均溫性 33
第四章 實驗結果與討論 40
第五章 結論 44
參考文獻 45
|
參考文獻 |
參考文獻
[1] 李建興,“光機電系統整合概論”,(2.2.3 精密玻璃模造技術 P54)
[2] 馬廣仁,“玻璃模造硬膜技術之進展分析”,工研院模造玻璃研討會2004。
[3] Paula Gould,“ Smart, Clean Surface”,Materialstoday, Elssevier,P.45, 2003.
[4] US patent 5656104, “Metal Mold for Glass Forming”, Nippon Steel Corporation, Aug. 12,1997.
[5] US patent 5876478, “Metal Mold for Glass Forming”, Nippon Steel Corporation, Mar. 2,1999.
[6] 莊文豪,“玻璃之高溫溼潤特性研究”,中華大學碩士畢業論文,2006.
[7] ”Zachariasen′s Random Network Theory”- 1932
[8] 吳宗憲、霍正邦、周文成、趙崇禮、馬廣仁,”光學玻璃與模仁材料界面化學反應之探討”, 中國機械工程學會第二十四屆全國學術研討會,2007.
|
指導教授 |
李天錫(Tian-Si Li)
|
審核日期 |
2018-3-29 |
推文 |
facebook plurk twitter funp google live udn HD myshare reddit netvibes friend youpush delicious baidu
|
網路書籤 |
Google bookmarks del.icio.us hemidemi myshare
|