摘要(英) |
In this thesis, we proposed the design of optical interconnect transceiver based on glass interposer and applied for High Definition Multimedia Interface (HDMI). The VCSELs, PD, VCSELs Driver IC, TIA, 45° micro-reflector and polymer waveguides will be integrated on glass interposer. The VCSELs, PD and Driver IC, TIA connecting with each other using high-frequency transmission lines and integrated on one side of glass interposer by flip-chip packaging. Polymer waveguides package on another side of glass interposer.
The simulation result of maximum optical coupling efficiency is 57.68 % at optical system of transmitting end and 59.62 % at optical system of receiving end. The alignment tolerance at -1 dB level for VCSEL and PD are larger than 9 m, MMF are larger than 13 m at TOSA and ROSA. The optical crosstalk between each channel is smaller than -44 dB at TOSA and ROSA.
Design of high-frequency transmission lines on glass interposer is proposed. According to the simulation result, design of single-ended and differential-pair transmission lines for TOSA and ROSA. Single-ended transmission lines at 0~62.5 GHz, return loss is smaller -20 dB and insertion loss larger than -0.2 dB for each channel. Differential-pair transmission lines at 0~50 GHz, return loss is smaller than -10 dB and insertion loss is larger than -1.5dB for each channel.
Design of differential–pair transmission lines on printed circuit board (PCB) is proposed. According simulation result, differential-pair transmission lines at 0~7.5 GHz, return loss smaller than -8 dB and insertion loss larger than -2 dB for each channel. Simulation of transmission lines when optical interconnect transceiver flip-chip packaging on PCB, return loss is smaller than -7 dB and insertion loss is larger than -2 dB for each channel. |
參考文獻 |
[1] IHS Markit: Year 2018 Will See First Uses of 8K Resolution Display, 2018
[2] HDMI Licensing Administrator, Inc: The Road to 8K and Next Generation Features, 2018
[3]Wikipedia: HDMI
[4] Silicon Line: Technology, The Data Rate Explosion
[5] Schlepple, N., Nishigaki, M., Uemura, H., Furuyama, H., Sugizaki, Y., Shibata, H., Koike, Y. : Ultracompact 4×3.4 Gbps optoelectronic package for an active optical HDMI cable. In: CPMT Symposium Japan, 2nd IEEE, pp. 1–4, 2012
[6] H.-S. Lee, S.-S. Lee, Y.-S. Son, "CWDM based HDMI interconnect incorporating passively aligned POF linked optical subassembly modules", Opt. Exp., vol. 19, no. 16, pp. 15380-15387, 2011.
[7] H. S. Lee, S. S. Lee, and Y. S. Son, “High tolerance receptacle type active optical interconnect incorporating collimated beam based optics,” J. Lightwave Technol. 31(5), 815–821, 2013
[8] W. T. Khan, J. Tong, S. Sitaraman, V. Sundaram, R. Tummala, and
J. Papapolymerou, “Characterization of electrical properties of glass and
transmission lines on thin glass up to 50 GHz,” in Proc. IEEE Electron.
Compon. Technol. Conf., San Diego, CA, USA, 2015, pp. 2138–2143.
[9] W. C. Lai et al., “300 mm size ultra-thin glass interposer technology
and high-Q embedded helical inductor (EHI) for mobile application,” in
IEDM Tech. Dig., Washington, DC, USA, 2013, pp. 13.4.1–13.4.4. |