 |
|
|
|
以作者查詢圖書館館藏 、以作者查詢臺灣博碩士 、以作者查詢全國書目 、勘誤回報 、線上人數：137 、訪客IP：18.222.200.143
姓名 李易翰(Yi-Han Lee) 查詢紙本館藏 畢業系所 電機工程學系 論文名稱 P型鎂矽錫合金及其熱電模組研究
(Thermoelectric Module Properties of P-type Mg2(Si,Sn) Alloy)相關論文 檔案 [Endnote RIS 格式]
[相關文章]
[文章引用]
[完整記錄]
[館藏目錄]
至系統瀏覽論文 ( 永不開放)
摘要(中) 在近年來，全球都在追求綠能發電，綠能能遏制地球環境的劣化，所以現今積極地開發綠色能源為主要的研究議題，而熱電能本身是種非常良好的綠色能源，熱電效應是指一種熱能與電能互相轉換的效應，其環保價值非常高，可以應用於，例如廢熱回收、溫差發電、熱電致冷等等…。而影響熱電效應好壞取決於材料本身的熱電優值(ZT)。因此提升材料ZT為其中最為重要的研究。
本研究主要透過在摻雜反應製作出P、N-type 奈米粉末，在與鎂錫粉末混合並冷壓成錠，接著在不同溫度下做退火反應，並得到何種溫度下最好的熱電特性，再使用此錠，來製作其模組，並量測其特性。摘要(英) In these years, the power consumption has been reaching new records, consuming lots of energy from coal, gasoline, fuel, and nuclear. These energy resource has their own drawbacks, resulting in pollutions and hazardous substance. Due to the concern of environmental sustainability, clean energy is in demand and in dire need.
In this study, P and N-type nanopowders were prepared by mechanical grinding, followed by doping and mixing to obtain the designed composition. Then it was cold-pressed into ingots and annealed at different temperatures to study the thermoelectric properties. The thermoelectric module was made and measured to test its conversion efficiency.關鍵字(中) ★ P型鎂矽錫合金及其熱電模組研究
★ 熱電模組
★ P型鎂矽錫合金關鍵字(英) ★ Thermoelectric Module Properties of P-type Mg2(Si,Sn) Alloy
★ Thermoelectric Module
★ P-type Mg2(Si,Sn) Alloy論文目次 目錄
摘要................................................................i
Abstract...........................................................ii
目錄...............................................................iv
第一章、導論........................................................1
1-1 前言................................................................ 1
1-2 研究動機............................................................ 2
1-3 熱電歷史............................................................ 2
1-4 文獻回顧 ........................................................... 3
第二章、實驗方法與儀器..............................................5
2-1 球磨粒徑 5um 矽粉末 ................................................. 5
2-2 混合粉末並退火 ..................................................... 5
2-3 冷壓成錠 ........................................................... 5
2-4 退火反應 ........................................................... 5
2-5 組裝模組............................................................ 5
2-6 量測儀器 ........................................................... 6
2-6-1 Seebeck 量測.................................................... 6
2-6-2 電導率量測 ..................................................... 7
2-6-3 密度量測 ....................................................... 8
2-6-4 熱擴散量測 ..................................................... 8
2-6-5 比熱量測 ....................................................... 9
2-6-6 熱導率量測 .................................................... 10
2-6-7 熱電優質 ZT(Figure of merit): .................................. 10
第三章、實驗流程與步驟.............................................11
3-1 前言 .............................................................. 11
3-2 實驗流程設計 ...................................................... 12
v
3-3 實驗步驟 .......................................................... 13
3-3-1 矽粉末球磨 .................................................... 13
3-3-2 P type 摻雜 ................................................... 14
3-3-3 混合美矽錫銀粉末 .............................................. 15
3-3-4 冷壓成錠 ...................................................... 15
3-3-5 封管及加壓 Cr .................................................. 16
3-3-6 組裝模組 ...................................................... 16
3-3-6-1 開路電壓量測...................................20
3-3-6-2 短路電流量測...................................20
3-3-6-3 輸出功率.......................................21
第四章、實驗結果與討論.............................................22
4-1 前言 .............................................................. 22
4-2 退火後詴片量測..................................................... 22
4-2-1 高溫退火量測................................................... 22
4-2-2 退火量測 ...................................................... 26
4-2-3 加壓 Cr 後退火量測 ............................................. 43
4-2-4-2 塊材退火量測...................................48
4-2-4-3 最佳 ZT 塊材 XRD 分析............................49
4-3 熱電模組電性量測 .................................................. 50
4-3-1 熱電模組組裝 .................................................. 50
4-3-2 Voc、Isc、Ri、Po量測 ............................................. 50
第五章、結論.......................................................52
參考文獻...........................................................53參考文獻 [1] 柏雲昌, 梁德馨, and 陳起鳳, "臺灣綠色電力發展--機會, 衝擊, 與政策設計," 臺灣能源期刊, 1: 5 2014.12, pp. 531-549, 2014.
[2] 范賢娟《科學發展》特約文字編輯, "廢熱回收的大助力–熱電材料," 2014/03/12.
[3] 楊少宏, "利用溫差發電裝置於回收廢熱發電之研究," 2017.
[4] 梁忠霖, "熱電晶片致冷效應之研究," 宜蘭大學機械與機電工程學系學位論文, pp. 1-75, 2017.
[5] 李鴻源, "熱電致冷晶片水冷卻循環散熱模組最佳化分析," 2017.
[6] 倪祥圃, "熱電優值 ZT 量測方法之研究與實作," 臺灣大學機械工程學研究所學位論文, pp. 1-75, 2016.
[7] 郭正次, 奈米結構材料科學: 全華, 2004.
[8] C.-C. Wang, "應用於熱電元件之矽鍺奈米結構開發研究," National Central University, 2017.
[9] 王慶奇, "應用於熱電元件之矽鍺奈米結構開發研究; SiGe Nanostructures for Thermoelectric Microcooler Applications," 國立中央大學, 2017.
[10] 辛正倫 and 李勝偉, "高熱電優值係數矽基奈米粉末所組成之熱電塊材; Thermoelectric bulk by high ZT Si nanowire/SiO2 nanoparticle composite," 財團法人國家實驗研究院科技政策研究與資訊中心, 2016.
[11] 柯佩汝, "金屬輔助化學蝕刻法製備矽奈米線之熱電性質研究; Thermoelectric properties of silicon nanowires fabricated using metal-assisted chemical etching," 國立中央大學, 2015.
[12] 黃以鈞, "奈米銀沉澱-蝕刻二段式製作陣列矽奈米線之研究; The study of fabricating silicon nanowire arrays with nano-sliver particle and two-step method," 國立中央大學, 2016.
[13] 鍾政毅, "應用表面微結構沉積銀顆粒輔助製作矽奈米線之研究; Study of assist fabricating Silicon nano wire by depositing silver particle on surface microstructure," 國立中央大學, 2016.
[14] 周雅文, "‘火花電漿燒結技術於熱電材料開發之應用," ed: 工業材料雜誌, 2010.
[15] 黃柏年, "利用火花電漿燒結法製備以矽為基底之奈米材料於熱電特性上之應用研究; Si-based nanomaterials for thermoelectric applications by spark plasma sintering," 國立中央大學, 2016.
[16] 郭孟學, "原子級分子線與金屬線奈米接面的熱導, 電導與熱電性質比較," 交通大學電子物理系所學位論文, pp. 1-94, 2017.
[17] W.-C. Wang, "矽基熱電模組開發及特性研究," National Central University, 2017.
[18] 辛正倫, "矽基熱電複合材料及模組組裝技術; Si-Based Thermoelectric Composite and Module Assembly," 財團法人國家實驗研究院科技政策研
54
究與資訊中心, 2017.
[19] 李勝偉, 辛正倫, and 張仍奎, "矽/鍺基奈米化塊材之熱電傳輸機制研究; Development of Si-Based and Ge-Based Nanostructured Thermoelectric Bulk Materials," 財團法人國家實驗研究院科技政策研究與資訊中心, 2018.
[20] 巫振榮, "熱電元件應用," 國家奈米元件實驗室奈米通訊, vol. 20, pp. 32-35, 2013.
[21] 朱旭山, "熱電材料與元件之原理與應用," ed: 工業材料雜誌, 2005.
[22] 陳維新 and 吳柏樺, "熱電晶片表面溫度震盪之熱電轉換現象," 成大研發快訊, vol. 31, 2017.
[23] 朱旭山, "熱電發電技術及其應用方向," ed: 工業材料雜誌, 2010.
[24] 洪郁閔, "熱電晶片於低溫差發電之應用研製," 宜蘭大學機械與機電工程學系學位論文, pp. 1-129, 2016.
[25] ???, ???, and ??春, "??半?体??器和致冷器的?用前景," ??工程, pp. 59-62, 2010.
[26] ?同俊 and 彭江英, "??功能材料及其在??和制冷方面的?用前景," 材料??, vol. 16, pp. 11-13, 2002.
[27] 劉君愷, "熱電技術發展現況."
[28] 劉倡宜, "碲化鉍合金薄膜熱電元件的開發," 臺灣大學機械工程學研究所學位論文, pp. 1-62, 2015.
[29] 葉建弦, 楊侑穎, 汪俊延, and 林育立, "中溫鎂矽合金塊材之製程及其熱電性質," 燃燒季刊, pp. 29-40, 2017.
[30] ??? and ?宏英, "黑索今超?化技?研究," 爆破器材, vol. 38, pp. 31-34+ 37, 2009.
[31] ?? and ?明?, "球磨机概述," 中?包?科技博?, pp. 19-19, 2012.
[32] 陳信文, 吳欣潔, and 張睿紳, "熱電材料與熱電模組," 化工, vol. 63, pp. 75-92, 2016.
[33] ?瑞?, "10.2 阿基米德原理 (教???)," 新?程· 下旬, pp. 90-90, 2017.
[34] 劉昱霆, "塊材, 薄膜與奈米線之熱導係數量測方法探討; Methods of Thermal Conductivity Measurement for Bulk, Thin Film and Nanowire," 國立中央大學, 2015.
[35] T.-c. Hung, "Synthesis and Application of Blue Light Poly (arylene ether) s Containing Polycyclic Aromatic Hydrocarbons for Polymer Light Emitting Diodes," 2016.
[36] J.-J. Huang, "鎂矽錫合金熱電特性研究及應用," National Central University, 2017.
[37] S.-. en:Image:Sourcetransform.PNG, 2007年3月31日.
[38] C. Lee, "Double-sided Symmetrical and Crossed Emitter Bifacial Crystalline Silicon Solar Cells with Heterojunction," 2017.
55
[39] 邱敬硯, "應用於熱電能量擷取且具最大功率點追蹤及能量回收之自啟動高效能多輸出升壓轉換器," 2017.
[40] 潘詳親, "金屬輔助化學蝕刻製備多孔矽結構與其熱傳性質分析; Manufacturing and Thermal Property Analysis of Porous Silicon Structure by Metal Assisted Chemical Etching," 國立中央大學, 2017.指導教授 辛正倫(Cheng-Lun Hsin) 審核日期 2018-7-23 推文 plurk
funp
live
udn
HD
myshare
netvibes
friend
youpush
delicious
baidu
網路書籤 Google bookmarks
del.icio.us
hemidemi
facebook
twitter
google
reddit