雷射焊補運用於壓鑄模具壽命改善研究

以作者查詢圖書館館藏

、以作者查詢臺灣博碩士

、以作者查詢全國書目

、勘誤回報

、線上人數：48

、訪客IP：3.14.133.162

姓名

謝俊傑(XIE, JUN-JIE) 查詢紙本館藏

畢業系所

機械工程學系在職專班

論文名稱

雷射焊補運用於壓鑄模具壽命改善研究
(Study on die- casting die service life improvement by laser-remelting process)

相關論文

★ 伺服數控電動壓床壓型參數最佳化以改善碳化鎢超硬合金燒結後品質不良之研究	★ 彈性元件耦合多頻寬壓電獵能器設計、製作與性能測試
★ 無心研磨製程參數優化研究	★ 碳纖維樹脂基複合材料真空輔助轉注成型研究-以縮小比例(1/5)汽車引擎蓋為例
★ 精密熱鍛模擬及模具合理化分析	★ 高頻元件重佈線層銅電鍍製程與光阻裂紋研究
★ 模組化滾針軸承自動組裝設備設計開發與功能驗證	★ 迴轉式壓縮機消音罩吐出口位置對壓縮機低頻噪音影響之研究
★ 晶粒成長行為對於高功率元件可靠度改善的驗證	★ HF-ERW製管製程分析及SCADA 工業4.0運用
★ 結合模流分析與實驗設計實現穩健射出成型與理想成型視窗的預測	★ 精密閥件射出成形製程開發-CAE模擬與開模驗證
★ 內窺鏡施夾器夾爪熱處理斷裂分析與改善驗證	★ 物理蒸鍍多層膜刀具對於玻璃纖維強化塑膠加工磨耗研究
★ 複合式類神經網路預測貨櫃船主機油耗	★ 新型乾法加工技術構建之高性能超細鑽石砂輪開發研究

檔案

[Endnote RIS 格式]

[Bibtex 格式]

[相關文章]

[文章引用]

[完整記錄]

[館藏目錄]

至系統瀏覽論文 ( 永不開放)

摘要(中)

壓鑄是工業中應用極為廣泛而重要製造方法之一，但作業環境因其高熱、高噪音而常令人感到屬於危險、辛苦、骯髒的3K工作。所以較少人願意投身其中，而其相關研究大多見於學術上。在壓鑄製程中最重要的關鍵之一為其模具壽命的延長，而模具壽命的長短攸關整體產能與品質甚為巨大。本論文研究了雷射焊補的技術延長模具壽命，且在微觀組織當中探討了模具發展熱龜裂的主因與為何模具經過雷射焊補後延緩熱龜裂的發生，最後運用了CAE技術探討發生熱龜裂發生的高風險區域。

摘要(英)

High pressure die-casting is one of the most widely used and important manufacturing method in modern industry, but the working environment is often dangerous, hard and dirty due to its high temperature and high noise. This is the reason why fewer people are willing to devote themselves to the job, and furthermore, most of researches about high pressure die-casting is academic study. One of the most important problem in the die-casting process is die service life improvement, and the problem affects not only capacity of production but also quality. In this paper, die- casting die service life improvement by laser-remelting process is investigated. In the view of microstructure, the main cause of thermal fatigue crack of die-casting die and inhibiting the propagation of the crack is discussed. Finally, finding the high-risk region where thermal fatigue crack occurs is worked out by the application of CAE(Computer Aided Engineering) technology.

關鍵字(中)

★ 壓鑄
★ 雷射焊補
★ 熱龜裂

關鍵字(英)

★ die-casting
★ laser-remelting process
★ thermal fatigue crack
★ CAE

論文目次

目錄
摘要 i
Abstract ii
誌謝 iii
目錄 iv
圖目錄 vii
表目錄 xii
符號說明 xiii
第一章緒論 1
1-1 前言 1
1-2 研究動機與目的 2
1-3 文獻回顧 5
第二章鋁合金壓鑄介紹 9
2-1 壓鑄機介紹 9
2-1-1. 熱室壓鑄 9
2-1-2. 冷室壓鑄 12
2-2 改善鋁合金壓鑄模具壽命方法 16
2-2-1 模具材料 20
2-2-2 模具熱處理 28
2-2-3 模具表面局部處理 29
2-2-4 模具表面塗層 31
2-2-6 壓鑄CAE應用 35
第三章雷射焊補模具 36
3-1 前言 36
3-2 產品瑕疵 39
3-3 雷射焊補模具 42
3-4 試驗樣品與探討 44
3-5 雷射焊接後對熱龜裂之抵抗能力討論 52
第四章 CAE模擬分析 55
4-1 前言 55
4-2 數值模擬分析的數學模型 55
4-3 模擬結果與分析 60
第四章結論 76
參考文獻 78

參考文獻

[1].North American Die Casting Association. http://www.diecasting.org/wcm/die_casting/faq/wcm/die_casting/faq.aspx?hkey=01ccba73-b463-4980-b3b4-a2c28815a015. Retrieved July 15th 2015.

[2].N. Dingremont, E. Bergmann, P. Collignon, Application of duplex coatings for metal injection moulding, Surface and Coatings Technology 72, pp. 157-162, 2005

[3].http://www.badgermetal.com/tl-extends.htm

[4].DITSA 壓鑄技術產學服務聯盟 https://www.ntou-ditsa.com/

[5].Venkatesan K, Shivpuri R (1995) Experimental and numerical investigation of the effect of process parameters on the erosive wear of die casting dies. J Mater Eng Perform 4:166–174

[6].Shivpuri R, Yu M, Venkatesan K, Chu KL (1995) A study of erosion in die casting dies by a multiple pin accelerated erosion test. J Mater Eng Perform 4:145–153

[7].Yu ML, Chu YL, and Shivpuri R (1993) A Study of corrosion of die materials and die coatings in aluminum die casting. Paper no. Cleveland-T93-072. Transactions of the North American Die Casting Association. In: 17th Int. Die Casting Congress and Exposition, USA

[8].Yu M, Shivpuri R, Rapp RA (1995) Effects of molten
aluminum on H13 dies and coatings. J Mater Eng Perform
4:175–181

[9].Kulkarni K, Srivastava A, Shivpuri R, Bhattacharya R, Dixit S, Bhat D (2002) Thermal cracking behavior of multi-layer LAFAD coatings on nitrided die steels in liquid aluminum processing. Surf Coat Technol 149:171–178

[10].Srivastava A, Joshi V, Shivpuri R (2004) Computer modeling and prediction of thermal fatigue cracking in die-casting tooling. Wear 256:38–43

[11].Persson A, Hogmark S, Bergstrom J (2004) Simulation and evaluation of thermal fatigue cracking of hot work tool steels. Int J Fatigue 26:1095–1107

[12].Domkin K, Hattel JH, Thorborg J (2009) Modeling of high temperature- and diffusion-controlled die soldering in aluminum high pressure die casting. J Mater Process Technol 209:4051–4061

[13].Zheng J, Wang QD, Zhao P, Wu CB (2009) Optimization of highpressure die-casting process parameters using artificial neural network. Int J Adv Manuf Technol 44:667–674

[14].Grum J, Slabe JM (2004) Possibility of introducing laser surfacing into maintenance service of die-casting dies. Surf Coat Technol 180–181:596–602

[15].Persson A, Hogmark S, Bergström J (2004) Failure modes in field-tested brass die casting dies. J Mater Process Technol 148:108–118

[16].Beal VE, Erasenthiran P, Hopkinson N, Dickens P, Ahrens CH (2006) The effect of scanning strategy on laser fusion of functionally graded H13/Cu materials. Int J Adv Manuf Technol 30:844–852

[17].Ren LQ, Han ZW, Li JJ, Tong J (2003) Effects of non-smooth characteristics on bionic bulldozer blades in resistance reduction against soil. Journal of Terra Mechanics 39:221–230

[18].Zhou H, Chen L, Wang W, Ren LQ, Shan HY, Zhang ZH (2005)Abrasive particle wear behavior of 3Cr2W8V steel processed to bionic non-smooth surface by laser. Mater Sci Eng Abstr 412:323–327

[19].Shan HY, Zhou H, Sun N, Ren LQ, Chen L, Li XZ (2008) Study on adhesion resistance behavior of sample with striated nonsmooth surface by laser processing technique. J Mater Process Technol 199:221–229

[20].Dynacast company https://www.dynacast.com/hot-chamber-die-casting

[21].Dynacast company https://www.dynacast.com/cold-chamber-die-casting

[22].IDRA group 4,000 ton cold chamber die-casting machine.

[23].Wei-Hung Industrial co.ltd.

[24]. Hitachi Metals, Ltd.

[25].模具技術資訊第62期.

[26].億權科技有限公司技術資料

[27].Dalong Cong.(2017) Effect of unit size on thermal fatigue behavior of hot work steel repaired by a biomimetic laser remelting process. Optics and Laser Technology 98 (2018) 205–213.

[28].G. Telasang.(2014). Structure–property correlation in laser surface treated AISI H13 tool steel for improved mechanical properties. Materials Science&EngineeringA599(2014)255–267.

[29].Kulkarni K, Srivastava A, Shivpuri R, Bhattacharya R, Dixit S,Bhat D (2002) Thermal cracking behavior of multi-layer LAFADcoatings on nitrided die steels in liquid aluminum processing. Surf Coat Technol 149:171–178

[30].西村富隆，張唯敏，熱作模具鋼抗軟化性，國外金屬加工，1998，pp. 14-16

[31].M. Gao, S. Chen, R.P. Wei, Metall. Trans. 23A (1992) 355.

[32].M. Gao, R.P. Wei, Scripta Metall. 26 (1992) 1175.

[33].Computational Fluid Dynamics An Introduction Chapter 2 Governing Equations of Fluid Dynamics J.D. Anderson, Jr.

指導教授

傅尹坤(Yiin-Kuen Fuh)

審核日期

2018-11-5

推文