| 參考文獻 |
Acedo, F. J., Barroso, C., Casanueva, C., & Galán, J. L. (2006). Co‐authorship in management and organizational studies: An empirical and network analysis. Journal of Management Studies, 43(5), 957-983.
Al-Fuqaha, A., Guizani, M., Mohammadi, M., Aledhari, M., & Ayyash, M. (2015). Internet of things: A survey on enabling technologies, protocols, and applications. IEEE communications surveys & tutorials, 17(4), 2347-2376.
Alabady, S. A., Al-Turjman, F., & Din, S. (2020). A novel security model for cooperative virtual networks in the IoT era. International Journal of Parallel Programming, 48(2), 280-295.
Anand, G., & Ward, P. T. (2004). Fit, flexibility and performance in manufacturing: coping with dynamic environments. Production and Operations Management, 13(4), 369-385.
Atzori, L., Iera, A., & Morabito, G. (2010). The internet of things: A survey. Computer Networks, 54(15), 2787-2805.
Bai, Y. (2017). Modeling analysis of Intelligent Manufacturing System based on SDN. Concurrency and Computation: Practice and Experience, 29(24), e4270.
Bertoncel, T., Erenda, I., & Meško, M. (2018). Managerial early warning system as best practice for project selection at a smart factory. Amfiteatru Economic, 20(49), 805-819.
Bingöl, S., & Kılıçgedik, H. Y. (2018). Application of gene expression programming in hot metal forming for intelligent manufacturing. Neural Computing and Applications, 30(3), 937-945.
Bisio, I., Garibotto, C., Grattarola, A., Lavagetto, F., & Sciarrone, A. (2018). Exploiting context-aware capabilities over the internet of things for industry 4.0 applications. IEEE network, 32(3), 101-107.
Blanco-Novoa, O., Fernandez-Carames, T. M., Fraga-Lamas, P., & Vilar-Montesinos, M. A. (2018). A practical evaluation of commercial industrial augmented reality systems in an industry 4.0 shipyard. IEEE Access, 6, 8201-8218.
Boccella, A. R., Piera, C., Cerchione, R., & Murino, T. (2020). Evaluating centralized and heterarchical control of smart manufacturing systems in the era of Industry 4.0. Applied Sciences, 10(3), 755.
Bokrantz, J., Skoogh, A., Berlin, C., & Stahre, J. (2017). Maintenance in digitalised manufacturing: Delphi-based scenarios for 2030. International Journal of Production Economics, 191, 154-169.
Boyack, K. W., & Klavans, R. (2010). Co‐citation analysis, bibliographic coupling, and direct citation: Which citation approach represents the research front most accurately? Journal of the American Society for information Science and Technology, 61(12), 2389-2404.
Chakraborty, G., Pagolu, M., & Garla, S. (2014). Text mining and analysis: practical methods, examples, and case studies using SAS: SAS Institute.
Chen, B., Wan, J., Shu, L., Li, P., Mukherjee, M., & Yin, B. (2018). Smart factory of industry 4.0: Key technologies, application case, and challenges. IEEE Access, 6, 6505-6519.
Chen, C.-T., Lee, C.-C., & Lin, I.-C. (2020). Efficient and secure three-party mutual authentication key agreement protocol for WSNs in IoT environments. PloS one, 15(4), e0232277.
Chen, H., Yang, Y., Yang, Y., Jiang, W., & Zhou, J. (2014). A bibliometric investigation of life cycle assessment research in the web of science databases. The International Journal of Life Cycle Assessment, 19(10), 1674-1685.
Chen, Z.-Y., & Kuo, R. (2019). Combining SOM and evolutionary computation algorithms for RBF neural network training. Journal of Intelligent Manufacturing, 30(3), 1137-1154.
Cheng, F.-F., Huang, Y.-W., Yu, H.-C., & Wu, C.-S. (2018). Mapping knowledge structure by keyword co-occurrence and social network analysis. Library Hi Tech, 36(4), 636-650. doi:10.1108/LHT-01-2018-0004
Cheng, Y., Chen, K., Sun, H., Zhang, Y., & Tao, F. (2018). Data and knowledge mining with big data towards smart production. Journal of Industrial Information Integration, 9, 1-13.
Chien, C.-F., & Chen, C.-C. (2020). Data-Driven Framework for Tool Health Monitoring and Maintenance Strategy for Smart Manufacturing. IEEE Transactions on Semiconductor Manufacturing, 33(4), 644-652.
Chiesi, A. (2001). Network Analysis. International Encyclopedia of the Social and Behavioral Sciences. In: Elsevier, Oxford.
Chu, M.-T., Khosla, R., & Nishida, T. (2012). Communities of practice model driven knowledge management in multinational knowledge based enterprises. Journal of Intelligent Manufacturing, 23(5), 1707-1720.
Cobo, M. J., López‐Herrera, A. G., Herrera‐Viedma, E., & Herrera, F. (2011). Science mapping software tools: Review, analysis, and cooperative study among tools. Journal of the American Society for information Science and Technology, 62(7), 1382-1402.
Colombo, A. W., Schoop, R., & Neubert, R. (2006). An agent-based intelligent control platform for industrial holonic manufacturing systems. IEEE Transactions on Industrial Electronics, 53(1), 322-337.
Conti, M., Kaliyar, P., Rabbani, M. M., & Ranise, S. (2020). Attestation-enabled secure and scalable routing protocol for IoT networks. Ad Hoc Networks, 98, 102054.
Cortes, C., & Vapnik, V. (1995). Support-vector networks. Machine learning, 20(3), 273-297.
Cui, W., Liu, S., Tan, L., Shi, C., Song, Y., Gao, Z., . . . Tong, X. (2011). Textflow: Towards better understanding of evolving topics in text. IEEE transactions on visualization and computer graphics, 17(12), 2412-2421.
Dai, H.-N., Wang, H., Xu, G., Wan, J., & Imran, M. (2020). Big data analytics for manufacturing internet of things: opportunities, challenges and enabling technologies. Enterprise Information Systems, 14(9-10), 1279-1303.
Davis, J., Edgar, T., Graybill, R., Korambath, P., Schott, B., Swink, D., . . . Wetzel, J. (2015). Smart manufacturing. Annual review of chemical and biomolecular engineering, 6, 141-160.
Davis, J., Edgar, T., Porter, J., Bernaden, J., & Sarli, M. (2012). Smart manufacturing, manufacturing intelligence and demand-dynamic performance. Computers & Chemical Engineering, 47, 145-156.
De Bellis, N. (2009). Bibliometrics and citation analysis: from the science citation index to cybermetrics: scarecrow press.
Edgar, T. F., & Pistikopoulos, E. N. (2018). Smart manufacturing and energy systems. Computers & Chemical Engineering, 114, 130-144.
Falagas, M. E., Pitsouni, E. I., Malietzis, G. A., & Pappas, G. (2008). Comparison of PubMed, Scopus, web of science, and Google scholar: strengths and weaknesses. The FASEB journal, 22(2), 338-342.
Farid, A. M. (2017). Measures of reconfigurability and its key characteristics in intelligent manufacturing systems. Journal of Intelligent Manufacturing, 28(2), 353-369.
Fatorachian, H., & Kazemi, H. (2018). A critical investigation of Industry 4.0 in manufacturing: theoretical operationalisation framework. Production Planning & Control, 29(8), 633-644.
Fortune Business Insights. (2020, 20200901). Smart manufacturing market size, share & COVID-19 impact analysis, By Component, By Deployment, By Enterprise Size, By Industry, and Regional Forcast, 2020-2027. Retrieved from https://www.fortunebusinessinsights.com/smart-manufacturing-market-103594
Frank, A. G., Dalenogare, L. S., & Ayala, N. F. (2019). Industry 4.0 technologies: Implementation patterns in manufacturing companies. International Journal of Production Economics, 210, 15-26.
Galletta, A., Carnevale, L., Celesti, A., Fazio, M., & Villari, M. (2017). A cloud-based system for improving retention marketing loyalty programs in industry 4.0: a study on big data storage implications. IEEE Access, 6, 5485-5492.
Gao, R. X., Wang, L., Helu, M., & Teti, R. (2020). Big data analytics for smart factories of the future. CIRP annals, 69(2), 668-692. doi:https://doi.org/10.1016/j.cirp.2020.05.002
Gao, Z., Chen, M., Guo, W. G., & Li, J. (2020). Tool Wear Characterization and Monitoring with Hierarchical Spatio-Temporal Models for Micro-Friction Stir Welding. Journal of Manufacturing Processes, 56, 1353-1365.
Genovese, A., Lenny Koh, S., Kumar, N., & Tripathi, P. K. (2014). Exploring the challenges in implementing supplier environmental performance measurement models: a case study. Production Planning & Control, 25(13-14), 1198-1211.
Giret, A., Trentesaux, D., Salido, M. A., Garcia, E., & Adam, E. (2017). A holonic multi-agent methodology to design sustainable intelligent manufacturing control systems. Journal of cleaner production, 167, 1370-1386.
Glänzel, W., Debackere, K., Thijs, B., & Schubert, A. (2006). A concise review on the role of author self-citations in information science, bibliometrics and science policy. Scientometrics, 67(2), 263-277.
Godin, B. (2006). On the origins of bibliometrics. Scientometrics, 68(1), 109-133.
GTMC. (2020). Implementation of "Industry 4.0" Smart Manufacturing, Germany Promotes UMATI Communication Standards and Specifications. Retrieved from https://www.market-prospects.com/articles/implementation-of-industry-40-smart-manufacturing
Gubbi, J., Buyya, R., Marusic, S., & Palaniswami, M. (2013). Internet of Things (IoT): A vision, architectural elements, and future directions. Future generation computer systems, 29(7), 1645-1660.
Guo, Y., Sun, Y., & Wu, K. (2020). Research and development of monitoring system and data monitoring system and data acquisition of CNC machine tool in intelligent manufacturing. International Journal of Advanced Robotic Systems, 17(2), 1729881419898017.
Hanum, H. M., Bakar, Z. A., Rahman, N. A., Rosli, M. M., & Musa, N. (2014). Using topic analysis for querying halal information on Malay documents. Procedia-Social and Behavioral Sciences, 121(19), 214-222.
Hatamura, Y., Nagao, T., Mitsuishi, M., Nakagawa, G., Sugishita, H., & Kramer, B. (1992). A Fundamental Structure for Intelligent Manufacturing and its Applications to a Machining Center. Paper presented at the Proceedings of the IFIP TC5/WG5. 3 Eight International PROLAMAT Conference on Human Aspects in Computer Integrated Manufacturing.
He, K., Zhang, X., Ren, S., & Sun, J. (2016). Deep residual learning for image recognition. Paper presented at the Proceedings of the IEEE conference on computer vision and pattern recognition.
He, L., Guijt, A., de Weerdt, M., Xing, L., & Yorke-Smith, N. (2019). Order acceptance and scheduling with sequence-dependent setup times: A new memetic algorithm and benchmark of the state of the art. Computers & Industrial Engineering, 138, 106102.
Heimerl, F., Lohmann, S., Lange, S., & Ertl, T. (2014). Word cloud explorer: Text analytics based on word clouds. Paper presented at the 2014 47th Hawaii International Conference on System Sciences.
Huang, B., Wang, W., Ren, S., Zhong, R. Y., & Jiang, J. (2019). A proactive task dispatching method based on future bottleneck prediction for the smart factory. International Journal of Computer Integrated Manufacturing, 32(3), 278-293.
Hwang, J., Aziz, A., Sung, N., Ahmad, A., Le Gall, F., & Song, J. (2020). AUTOCON-IoT: Automated and scalable online conformance testing for IoT applications. IEEE Access, 8, 43111-43121.
Hwang, S. (2019). A network clock model for time awareness in the Internet of things and artificial intelligence applications. The Journal of Supercomputing, 75(8), 4309-4328.
Illa, P. K., & Padhi, N. (2018). Practical guide to smart factory transition using iot, big data and edge analytics. IEEE Access, 6, 55162-55170.
Ivanov, D., Dolgui, A., Sokolov, B., Werner, F., & Ivanova, M. (2016). A dynamic model and an algorithm for short-term supply chain scheduling in the smart factory industry 4.0. International Journal of Production Research, 54(2), 386-402.
Jacobson, S. (2021). Strategy and Execution in Smart Manufacturing Must Meet in Middle. Retrieved from https://blogs.gartner.com/power-of-the-profession-blog/strategy-and-execution-in-smart-manufacturing-must-meet-in-middle/?_ga=2.251196294.1055982620.1616730399-720136575.1612215595
Jeon, J., Park, J. H., & Jeong, Y.-S. (2020). Dynamic analysis for IoT malware detection with convolution neural network model. IEEE Access, 8, 96899-96911.
Jeong, J. P., Yeon, S., Kim, T., Lee, H., Kim, S. M., & Kim, S.-C. (2018). SALA: Smartphone-assisted localization algorithm for positioning indoor IoT devices. Wireless Networks, 24(1), 27-47.
Jerman, A., Pejić Bach, M., & Aleksić, A. (2020). Transformation towards smart factory system: Examining new job profiles and competencies. Systems Research and Behavioral Science, 37(2), 388-402.
Jerman, A., Pejić Bach, M., & Bertoncelj, A. (2018). A bibliometric and topic analysis on future competences at smart factories. Machines, 6(3), 41.
Jian, C., Ping, J., & Zhang, M. (2020). A cloud edge-based two-level hybrid scheduling learning model in cloud manufacturing. International Journal of Production Research, 1-15.
Jin, W., & Kim, D. (2019). Improved resource directory based on DNS name self-registration for device transparent access in heterogeneous IoT networks. IEEE Access, 7, 112859-112869.
Kagermann, H., Helbig, J., Hellinger, A., & Wahlster, W. (2013). Recommendations for implementing the strategic initiative INDUSTRIE 4.0: Securing the future of German manufacturing industry; final report of the Industrie 4.0 Working Group: Forschungsunion.
Kang, C. W., Ramzan, M. B., Sarkar, B., & Imran, M. (2018). Effect of inspection performance in smart manufacturing system based on human quality control system. The International Journal of Advanced Manufacturing Technology, 94(9), 4351-4364.
Kang, H. S., Lee, J. Y., Choi, S., Kim, H., Park, J. H., Son, J. Y., . . . Do Noh, S. (2016). Smart manufacturing: Past research, present findings, and future directions. International journal of precision engineering and manufacturing-green technology, 3(1), 111-128.
Kessler, M. M. (1963). Bibliographic coupling between scientific papers. American documentation, 14(1), 10-25.
Kim, Y.-J. (1995). A framework for an on-line diagnostic expert system for intelligent manufacturing. Expert Systems With Applications, 9(1), 55-61.
Klavans, R., & Boyack, K. W. (2017). Research portfolio analysis and topic prominence. Journal of Informetrics, 11(4), 1158-1174.
Ko, M., Kim, C., Lee, S., & Cho, Y. (2020). An Assessment of Smart Factories in Korea: An Exploratory Empirical Investigation. Applied Sciences, 10(21), 7486.
Kreutz, D., Ramos, F. M., Verissimo, P. E., Rothenberg, C. E., Azodolmolky, S., & Uhlig, S. (2014). Software-defined networking: A comprehensive survey. Proceedings of the IEEE, 103(1), 14-76.
Kropivšek, J., & Grošelj, P. (2020). Digital Development of Slovenian Wood Industry. Drvna industrija: Znanstveni časopis za pitanja drvne tehnologije, 71(2), 139-148.
Kulkarni, A., Balasubramanian, D., Karsai, G., & Denno, P. (2018). An analytical framework for smart manufacturing. Paper presented at the MATEC Web of Conferences.
Kusiak, A. (2018). Smart manufacturing. International Journal of Production Research, 56(1-2), 508-517.
Laudel, G. (2002). What do we measure by co-authorships? Research evaluation, 11(1), 3-15.
LeCun, Y., Bengio, Y., & Hinton, G. (2015). Deep learning. nature, 521(7553), 436-444.
Lee, D.-H., & Lee, I.-Y. (2018). Dynamic group authentication and key exchange scheme based on threshold secret sharing for Iot smart metering environments. Sensors, 18(10), 3534.
Lee, J., Bagheri, B., & Kao, H.-A. (2015). A cyber-physical systems architecture for industry 4.0-based manufacturing systems. Manufacturing letters, 3, 18-23.
Lee, J., Jun, S., Chang, T.-W., & Park, J. (2017). A smartness assessment framework for smart factories using analytic network process. Sustainability, 9(5), 794.
Lei, M., Yang, X., Tseng, M. M., & Yang, S. (1998). Design an intelligent machine center—strategy and practice. Mechatronics, 8(3), 271-285.
Leitão, P. (2009). Agent-based distributed manufacturing control: A state-of-the-art survey. Engineering Applications of Artificial Intelligence, 22(7), 979-991.
Leitão, P., & Restivo, F. (2006). ADACOR: A holonic architecture for agile and adaptive manufacturing control. Computers in industry, 57(2), 121-130.
Lenz, J., MacDonald, E., Harik, R., & Wuest, T. (2020). Optimizing smart manufacturing systems by extending the smart products paradigm to the beginning of life. Journal of Manufacturing Systems, 57, 274-286.
Li, H., Ota, K., & Dong, M. (2018). Learning IoT in edge: Deep learning for the Internet of Things with edge computing. IEEE network, 32(1), 96-101.
Li, J., Tao, B., Huang, S., & Yin, Z. (2019). Cutting tools embedded with thin film thermocouples vertically to the rake face for temperature measurement. Sensors and Actuators A: Physical, 296, 392-399.
Li, L. (2018). China′s manufacturing locus in 2025: With a comparison of “Made-in-China 2025” and “Industry 4.0”. Technological Forecasting and Social Change, 135, 66-74.
Li, L., Ota, K., & Dong, M. (2018). Deep learning for smart industry: Efficient manufacture inspection system with fog computing. IEEE Transactions on Industrial Informatics, 14(10), 4665-4673.
Li, X., Qin, K., Zeng, B., Gao, L., & Wang, L. (2017). A dynamic parameter controlled harmony search algorithm for assembly sequence planning. The International Journal of Advanced Manufacturing Technology, 92(9), 3399-3411.
Li, Z., Liu, R., & Wu, D. (2019). Data-driven smart manufacturing: tool wear monitoring with audio signals and machine learning. Journal of Manufacturing Processes, 48, 66-76.
Lin, Y.-C., Yeh, C.-C., Chen, W.-H., Liu, W.-C., & Wang, J.-J. (2020). The Use of Big Data for Sustainable Development in Motor Production Line Issues. Sustainability, 12(13), 5323.
Liu, H., Shi, S., Yang, P., & Yang, J. (2018). An improved genetic algorithm approach on mechanism kinematic structure enumeration with intelligent manufacturing. Journal of Intelligent & Robotic Systems, 89(3), 343-350.
Liu, J., An, Y., Dou, R., & Ji, H. (2018). Dynamic deep learning algorithm based on incremental compensation for fault diagnosis model. International Journal of Computational Intelligence Systems, 11(1), 846-860.
Lu, S., Pei, J., Liu, X., & Pardalos, P. M. (2020). Robust parallel-batching scheduling with fuzzy deteriorating processing time and variable delivery time in smart manufacturing. Fuzzy Optimization and Decision Making, 19(3), 333-357.
Müller, J. M., Buliga, O., & Voigt, K.-I. (2018). Fortune favors the prepared: How SMEs approach business model innovations in Industry 4.0. Technological Forecasting and Social Change, 132, 2-17.
Majeed, A., Zhang, Y., Ren, S., Lv, J., Peng, T., Waqar, S., & Yin, E. (2021). A big data-driven framework for sustainable and smart additive manufacturing. Robotics and Computer-Integrated Manufacturing, 67, 102026.
Mathews, J. (1995). Organizational foundations of intelligent manufacturing systems—the holonic viewpoint. Computer Integrated Manufacturing Systems, 8(4), 237-243.
Ming, L., Shuzi, Y., Xiaohong, Y., & Tseng, M. M. (1998). A CORBA-based agent-driven design for distributed intelligent manufacturing systems. Journal of Intelligent Manufacturing, 9(5), 457-465.
Mittal, S., Khan, M. A., Romero, D., & Wuest, T. (2019). Smart manufacturing: characteristics, technologies and enabling factors. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 233(5), 1342-1361.
Mongeon, P., & Paul-Hus, A. (2016). The journal coverage of Web of Science and Scopus: a comparative analysis. scientometrics, 106(1), 213-228.
Monostori, L., Váncza, J., & Kumara, S. R. (2006). Agent-based systems for manufacturing. CIRP annals, 55(2), 697-720.
Morales-Velazquez, L., de Jesus Romero-Troncoso, R., Osornio-Rios, R. A., Herrera-Ruiz, G., & Cabal-Yepez, E. (2010). Open-architecture system based on a reconfigurable hardware–software multi-agent platform for CNC machines. Journal of Systems Architecture, 56(9), 407-418.
Mordor Intelligence. (2021, 01/01). Smar Manufacturing Market - Growth, Trends, COVID-19 Impact, and Forecasts (2021-2016). Mordor Intelligence. Retrieved from https://www.mordorintelligence.com/industry-reports/smart-manufacturing-market
Mughal, M. A., Shi, P., Ullah, A., Mahmood, K., Abid, M., & Luo, X. (2019). Logical tree based secure rekeying management for smart devices groups in IoT enabled WSN. IEEE Access, 7, 76699-76711.
Nagadi, K., Rabelo, L., Basingab, M., Sarmiento, A. T., Jones, A., & Rahal, A. (2018). A hybrid simulation-based assessment framework of smart manufacturing systems. International Journal of Computer Integrated Manufacturing, 31(2), 115-128.
Napoleone, A., Macchi, M., & Pozzetti, A. (2020). A review on the characteristics of cyber-physical systems for the future smart factories. Journal of Manufacturing Systems, 54, 305-335.
Patel, P., Ali, M. I., & Sheth, A. (2018). From raw data to smart manufacturing: AI and semantic web of things for industry 4.0. IEEE Intelligent Systems, 33(4), 79-86.
Perez-Alfaro, I., Gil-Hernandez, D., Muñoz-Navascues, O., Casbas-Gimenez, J., Sanchez-Catalan, J. C., & Murillo, N. (2020). Low-Cost Piezoelectric Sensors for Time Domain Load Monitoring of Metallic Structures During Operational and Maintenance Processes. Sensors, 20(5), 1471.
Persson, O. (2010). Identifying research themes with weighted direct citation links. Journal of Informetrics, 4(3), 415-422.
Phuyal, S., Bista, D., & Bista, R. (2020). Challenges, Opportunities and Future Directions of Smart Manufacturing: A State of Art Review. Sustainable Futures, 2, 100023.
Qin, A., Guo, L., You, Z., Gao, H., Wu, X., & Xiang, S. (2020). Research on automatic monitoring method of face milling cutter wear based on dynamic image sequence. The International Journal of Advanced Manufacturing Technology, 110(11), 3365-3376.
Rashid, A., & Tjahjono, B. (2016). Achieving manufacturing excellence through the integration of enterprise systems and simulation. Production Planning & Control, 27(10), 837-852.
Robertson, D., & Ulrich, K. (1998). Planning for product platforms. Sloan management review, 39(4), 19.
Salah, B., Khan, S., Ramadan, M., & Gjeldum, N. (2020). Integrating the Concept of Industry 4.0 by Teaching Methodology in Industrial Engineering Curriculum. Processes, 8(9), 1007.
Saniuk, S., Grabowska, S., & Gajdzik, B. (2020). Social expectations and market changes in the context of developing the Industry 4.0 concept. Sustainability, 12(4), 1362.
Shi, Z., Xie, Y., Xue, W., Chen, Y., Fu, L., & Xu, X. (2020). Smart factory in Industry 4.0. Systems Research and Behavioral Science, 37(4), 607-617.
Shibata, N., Kajikawa, Y., & Sakata, I. (2012). Link prediction in citation networks. Journal of the American Society for information Science and Technology, 63(1), 78-85.
Shibata, N., Kajikawa, Y., Takeda, Y., & Matsushima, K. (2009). Comparative study on methods of detecting research fronts using different types of citation. Journal of the American Society for information Science and Technology, 60(3), 571-580.
Singh, S., & Tiwari, M. (2002). Intelligent agent framework to determine the optimal conflict-free path for an automated guided vehicles system. International Journal of Production Research, 40(16), 4195-4223.
Smart Manufacturing Leadership Coalition. (2011). Implementing 21st century smart manufacturing. Retrieved from https://www.controlglobal.com/assets/11WPpdf/110621_SMLC-smart-manufacturing.pdf
Smith, R. G. (1980). The contract net protocol: High-level communication and control in a distributed problem solver. IEEE Computer Architecture Letters, 29(12), 1104-1113.
Suh, S.-H., Cho, J.-H., & Hong, H.-D. (2002). On the architecture of intelligent STEP-compliant CNC. International Journal of Computer Integrated Manufacturing, 15(2), 168-177.
Tao, F., & Qi, Q. (2017). New IT driven service-oriented smart manufacturing: framework and characteristics. IEEE Transactions on Systems, Man, and Cybernetics: Systems, 49(1), 81-91.
Tao, F., & Qi, Q. (2019). New IT driven service-oriented smart manufacturing: framework and characteristics. IEEE Transactions on Systems, Man, and Cybernetics: Systems, 49(1), 81-91.
Tao, F., Qi, Q., Liu, A., & Kusiak, A. (2018). Data-driven smart manufacturing. Journal of Manufacturing Systems, 48, 157-169.
Trentesaux, D., Borangiu, T., & Thomas, A. (2016). Emerging ICT concepts for smart, safe and sustainable industrial systems. In: Elsevier.
Tripathi, A., Tiwari, M., & Chan, F. (2005). Multi-agent-based approach to solve part selection and task allocation problem in flexible manufacturing systems. International Journal of Production Research, 43(7), 1313-1335.
Tsukune, H., Tsukamoto, M., Matsushita, T., Tomita, F., Okada, K., Ogasawara, T., . . . Yuba, T. (1993). Modular manufacturing. Journal of Intelligent Manufacturing, 4(2), 163-181.
Uva, A. E., Gattullo, M., Manghisi, V. M., Spagnulo, D., Cascella, G. L., & Fiorentino, M. (2018). Evaluating the effectiveness of spatial augmented reality in smart manufacturing: a solution for manual working stations. The International Journal of Advanced Manufacturing Technology, 94(1), 509-521.
Valckenaers, P., Van Brussel, H., Wyns, J., Bongaerts, L., & Peeters, P. (1998). Designing holonic manufacturing systems. Robotics and Computer-Integrated Manufacturing, 14(5-6), 455-464.
Van Brussel, H., Wyns, J., Valckenaers, P., Bongaerts, L., & Peeters, P. (1998). Reference architecture for holonic manufacturing systems: PROSA. Computers in industry, 37(3), 255-274.
Van Eck, N. J., & Waltman, L. (2014). Visualizing bibliometric networks. In Measuring scholarly impact (pp. 285-320): Springer.
Veeramani, D., Bernardo, J. J., Chung, C. H., & Gupta, Y. P. (1995). Computer‐integrated manufacturing: a taxonomy of integration and research issues. Production and Operations Management, 4(4), 360-380.
Waltman, L., & Van Eck, N. J. (2013). A smart local moving algorithm for large-scale modularity-based community detection. The European physical journal B, 86(11), 1-14.
Wan, J., Chen, B., Wang, S., Xia, M., Li, D., & Liu, C. (2018). Fog computing for energy-aware load balancing and scheduling in smart factory. IEEE Transactions on Industrial Informatics, 14(10), 4548-4556.
Wan, J., Tang, S., Li, D., Wang, S., Liu, C., Abbas, H., & Vasilakos, A. V. (2017). A manufacturing big data solution for active preventive maintenance. IEEE Transactions on Industrial Informatics, 13(4), 2039-2047.
Wan, J., Tang, S., Shu, Z., Li, D., Wang, S., Imran, M., & Vasilakos, A. V. (2016). Software-defined industrial internet of things in the context of industry 4.0. IEEE Sensors Journal, 16(20), 7373-7380.
Wan, J., Yi, M., Li, D., Zhang, C., Wang, S., & Zhou, K. (2016). Mobile services for customization manufacturing systems: An example of industry 4.0. IEEE Access, 4, 8977-8986.
Wang, B., Pan, S.-Y., Ke, R.-Y., Wang, K., & Wei, Y.-M. (2014). An overview of climate change vulnerability: a bibliometric analysis based on Web of Science database. Natural Hazards, 74(3), 1649-1666.
Wang, B., Tao, F., Fang, X., Liu, C., Liu, Y., & Freiheit, T. (2020). Smart Manufacturing and Intelligent Manufacturing: A Comparative Review. Engineering.
Wang, J., Ma, Y., Zhang, L., Gao, R. X., & Wu, D. (2018). Deep learning for smart manufacturing: Methods and applications. Journal of Manufacturing Systems, 48, 144-156.
Wang, L., Brennan, R. W., Balasubramanian, S., & Norrie, D. H. (2001). Realizing holonic control with function blocks. Integrated Computer-Aided Engineering, 8(1), 81-93.
Wang, S., Wan, J., Li, D., & Zhang, C. (2016). Implementing smart factory of industrie 4.0: an outlook. International journal of distributed sensor networks, 12(1), 3159805.
Wang, S., Wan, J., Zhang, D., Li, D., & Zhang, C. (2016). Towards smart factory for industry 4.0: a self-organized multi-agent system with big data based feedback and coordination. Computer Networks, 101, 158-168.
Wang, X., Fang, Z., & Sun, X. (2016). Usage patterns of scholarly articles on Web of Science: a study on Web of Science usage count. scientometrics, 109(2), 917-926.
Warnecke, H.-J. (1984). Manufacturing in Europe. TRANS. INST. ENG. AUST. MECH. ENG.(3), 172-182.
Wei, H., Li, S., Jiang, H., Hu, J., & Hu, J. (2018). Hybrid genetic simulated annealing algorithm for improved flow shop scheduling with makespan criterion. Applied Sciences, 8(12), 2621.
Wu, Y., Zhao, X., Xu, Y., & Chen, Y. (2020). A flexible planning methodology for product family assembly line based on improved NSGA_II. Assembly Automation.
Xu, X. (2012). From cloud computing to cloud manufacturing. Robotics and Computer-Integrated Manufacturing, 28(1), 75-86.
Xu, X., Wang, L., & Newman, S. T. (2011). Computer-aided process planning–A critical review of recent developments and future trends. International Journal of Computer Integrated Manufacturing, 24(1), 1-31.
Yang, S., He, R., Zhang, Z., Cao, Y., Gao, X., & Liu, X. (2020). CHAIN: cyber hierarchy and interactional network enabling digital solution for battery full-lifespan management. Matter.
Yang, Y., Hao, B., Hao, X., Li, L., Chen, N., Xu, T., . . . He, N. (2020). A Novel Tool (Single-Flute) Condition Monitoring Method for End Milling Process Based on Intelligent Processing of Milling Force Data by Machine Learning Algorithms. International Journal of Precision Engineering and Manufacturing, 21(11), 2159-2171.
Yao, F., Yao, Y., Xing, L., Chen, H., Lin, Z., & Li, T. (2019). An intelligent scheduling algorithm for complex manufacturing system simulation with frequent synchronizations in a cloud environment. Memetic Computing, 11(4), 357-370.
Yao, X., & Lin, Y. (2016). Emerging manufacturing paradigm shifts for the incoming industrial revolution. The International Journal of Advanced Manufacturing Technology, 85(5), 1665-1676.
Yao, X., Zhou, J., Lin, Y., Li, Y., Yu, H., & Liu, Y. (2019). Smart manufacturing based on cyber-physical systems and beyond. Journal of Intelligent Manufacturing, 30(8), 2805-2817.
Yao, X., Zhou, J., Zhang, J., & Boër, C. R. (2017). From intelligent manufacturing to smart manufacturing for industry 4.0 driven by next generation artificial intelligence and further on. Paper presented at the 2017 5th international conference on enterprise systems (ES).
Yuniarto, M., & Labib, A. (2006). Fuzzy adaptive preventive maintenance in a manufacturing control system: a step towards self-maintenance. International Journal of Production Research, 44(1), 159-180.
Zawadzki, P., & Żywicki, K. (2016). Smart product design and production control for effective mass customization in the Industry 4.0 concept. Management and production engineering review, 7.
Zhang, G., Chen, C.-H., Zheng, P., & Zhong, R. Y. (2020). An integrated framework for active discovery and optimal allocation of smart manufacturing services. Journal of cleaner production, 273, 123144.
Zhao, R., Yan, R., Chen, Z., Mao, K., Wang, P., & Gao, R. X. (2019). Deep learning and its applications to machine health monitoring. Mechanical Systems and Signal Processing, 115, 213-237.
Zheng, P., Sang, Z., Zhong, R. Y., Liu, Y., Liu, C., Mubarok, K., . . . Xu, X. (2018). Smart manufacturing systems for Industry 4.0: Conceptual framework, scenarios, and future perspectives. Frontiers of Mechanical Engineering, 13(2), 137-150.
Zhong, R. Y., Huang, G. Q., Lan, S., Dai, Q., Chen, X., & Zhang, T. (2015). A big data approach for logistics trajectory discovery from RFID-enabled production data. International Journal of Production Economics, 165, 260-272.
Zhong, R. Y., Xu, C., Chen, C., & Huang, G. Q. (2017). Big data analytics for physical internet-based intelligent manufacturing shop floors. International Journal of Production Research, 55(9), 2610-2621. |
[Endnote RIS 格式]
[相關文章]
[文章引用]
[完整記錄]
[館藏目錄]
[檢視]
plurk
funp
live
udn
HD
myshare
netvibes
friend
youpush
delicious
baidu
Google bookmarks
del.icio.us
hemidemi
facebook
twitter
google
reddit