參考文獻 |
參考文獻
1. Jahan, M. P., Rahman, M., & Wong, Y. S. (2011). “A review on the conventional and micro-electrodischarge machining of tungsten carbide.” International journal of machine tools and manufacture, 51(12), 837-858.
2. 許世勳,大面積放電加工技術之研究,國立中央大學機械工程研究所,碩士論文,2012。
3. Ho, K. H., & Newman, S. T. (2003). “State of the art electrical discharge machining (EDM).” International Journal of Machine Tools and Manufacture, 43(13), 1287-1300.
4. Leão, F. N., & Pashby, I. R. (2004). “A review on the use of environmentally-friendly dielectric fluids in electrical discharge machining.” Journal of materials processing technology, 149(1-3), 341-346.
5. König, W., Dauw, D. F., Levy, G., & Panten, U. (1988). “EDM-future steps towards the machining of ceramics.” CIRP Annals, 37(2), 623-631.
6. Soni, J. S. (1994). “Microanalysis of debris formed during rotary EDM of titanium alloy (Ti 6A1 4V) and die steel (T 215 Cr12).” Wear, 177(1), 71-79.
7. Endo, T., Tsujimoto, T., & Mitsui, K. (2008). “Study of vibration-assisted micro-EDM—the effect of vibration on machining time and stability of discharge.” Precision Engineering, 32(4), 269-277.
8. Liao, Y. S., Wu, P. S., & Liang, F. Y. (2013). “Study of debris exclusion effect in linear motor equipped die-sinking EDM process.” Procedia Cirp, 6, 123-128.
9. Simao, J., Lee, H. G., Aspinwall, D. K., Dewes, R. C., & Aspinwall, E. M. (2003). “Workpiece surface modification using electrical discharge machining.” International Journal of Machine Tools and Manufacture, 43(2), 121-128.
10. Lee, H. T., & Tai, T. Y. (2003). “Relationship between EDM parameters and surface crack formation.” Journal of Materials Processing Technology, 142(3), 676-683.
11. Lee, S. H., & Li, X. (2003). “Study of the surface integrity of the machined workpiece in the EDM of tungsten carbide.” Journal of materials processing technology, 139(1-3), 315-321.
12. Salman, Ö., & Kayacan, M. C. (2008). “Evolutionary programming method for modeling the EDM parameters for roughness.” Journal of materials processing technology, 200(1-3), 347-355.
13. Saxena, K. K., Srivastava, A. S., & Agarwal, S. (2016). “Experimental investigation into the micro-EDM characteristics of conductive SiC.” Ceramics International, 42(1), 1597-1610.
14. Yerui, F., Yongfeng, G., & Zongfeng, L. (2016). “Experimental investigation of EDM parameters for TiC/Ni cermet machining.” Procedia Cirp, 42, 18-22.
15. Zeilmann, R. P., Ivaninski, T., & Webber, C. (2018). “Surface integrity of AISI H13 under different pulse time and depths by EDM process.” Procedia CIRP, 71, 472-477.
16. Buschaiah, K., JagadeeswaraRao, M., & Krishnaiah, A. (2018). “Investigation on the influence of Edm parameters on machining characteristics for Aisi 304.” Materials Today: Proceedings, 5(2), 3648-3656.
17. Bahgat, M. M., Shash, A. Y., Abd-Rabou, M., & El-Mahallawi, I. S. (2019). “Influence of process parameters in electrical discharge machining on H13 die steel.” Heliyon, 5(6), e01813.
18. Zhixin, J., Jianhua, Z., & Xing, A. (1995). “Ultrasonic vibration pulse electro-discharge machining of holes in engineering ceramics.” Journal of materials processing technology, 53(3-4), 811-816.
19. 黃俊曄,放電與超音波振動複合加工添加 TiC 及 SiC,國立中央大學機械工程研究所,碩士論文,2000。
20. Gao, C., & Liu, Z. (2003). “A study of ultrasonically aided micro-electrical-discharge machining by the application of workpiece vibration.” Journal of materials processing technology, 139(1-3), 226-228.
21. Praneetpongrung, C., Fukuzawa, Y., Nagasawa, S., & Yamashita, K. (2010). “Effects of the EDM combined ultrasonic vibration on the machining properties of Si3N4.” Materials Transactions, 51(11), 2113-2120.
22. Lin, Y. C., Chow, H. M., Tsui, H. P., & Chen, Y. F. (2013). “Study on ultrasonic vibration in gas and optimization of a novel process of EDM.” In Advanced Materials Research (Vol. 675, pp. 365-369). Trans Tech Publications Ltd.
23. Yan, B. H., & Chen, S. L. (1994). “Characteristics of SKD11 by complex process of electrical discharge machining using liquid suspended with alumina powder.” Nippon Kinzoku Gakkaishi (1952), 58(9), 1067-1072.
24. Chow, H. M., Yan, B. H., Huang, F. Y., & Hung, J. C. (2000). “Study of added powder in kerosene for the micro-slit machining of titanium alloy using electro-discharge machining.” Journal of Materials Processing Technology, 101(1-3), 95-103.
25. 王陳鴻,放電液中添加 Al-Cr 混合粉末,國立中央大學機械工程研究所,碩士論文,2000。
26. Zhao, W. S., Meng, Q. G., & Wang, Z. L. (2002). “The application of research on powder mixed EDM in rough machining.” Journal of materials processing technology, 129(1-3), 30-33.
27. 卓漢明、黃永河、林清田、陳河永、顏炳華 (民91),純水中添加粉末對鈦合金微細槽放電加工特性之研究,南開學報,頁567+569-586。
28. Kansal, H. K., Singh, S., & Kumar, P. (2007). “Effect of silicon powder mixed EDM on machining rate of AISI D2 die steel.” Journal of Manufacturing processes, 9(1), 13-22.
29. Prihandana, G. S., Mahardika, M., Hamdi, M., Wong, Y. S., & Mitsui, K. (2009). “Effect of micro-powder suspension and ultrasonic vibration of dielectric fluid in micro-EDM processes—Taguchi approach.” International Journal of Machine Tools and Manufacture, 49(12-13), 1035-1041.
30. Shabgard, M., & Khosrozadeh, B. (2017). “Investigation of carbon nanotube added dielectric on the surface characteristics and machining performance of Ti–6Al–4V alloy in EDM process.” Journal of Manufacturing processes, 25, 212-219.
31. Paul, B. K., Sahu, S. K., Jadam, T., Datta, S., Dhupal, D., & Mahapatra, S. S. (2018). “Effects of addition of copper powder in the dielectric media (EDM Oil) on Electro-discharge machining performance of inconel 718 super alloys.” Materials Today: Proceedings, 5(9), 17618-17626.
32. Muttamara, A., Nakwonga, P., & Thongruang, R. (2018). “Investigations on Ultrasonic vibration Assisted EDM in Tin Powder Mixed Dielectric.” Int. J. Mech. Prod. Eng, 6, 2320.
33. 李培豪,超音波輔助添加導電粉末於放電加工鐵基金屬玻璃之研究,國立中央大學機械工程研究所,碩士論文,2019。
34. Bui, V. D., Mwangi, J. W., Meinshausen, A. K., Mueller, A. J., Bertrand, J., & Schubert, A. (2020). “Antibacterial coating of Ti-6Al-4V surfaces using silver nano-powder mixed electrical discharge machining.” Surface and Coatings Technology, 383, 125254.
35. Kremer, D., Lebrun, J. L., Hosari, B., & Moisan, A. (1989). “Effects of ultrasonic vibrations on the performances in EDM.” CIRP Annals, 38(1), 199-202. |