結構表面缺陷識別與尺寸量測 之正射化雷射光斑法

以作者查詢圖書館館藏

、以作者查詢臺灣博碩士

、以作者查詢全國書目

、勘誤回報

、線上人數：27

、訪客IP：18.116.12.137

姓名

李彥勳(Yen-Hsun Lee) 查詢紙本館藏

畢業系所

土木工程學系

論文名稱

結構表面缺陷識別與尺寸量測之正射化雷射光斑法
(Structure Surface Defect Recognition and Sizing Based on Laser Spots Image Orthorectification)

相關論文

★ 貼片補強構件之層間應力分析	★ 軌道不整檢測及識別方法
★ 混凝土結構分析之三維等效單軸組成材料模型	★ 卵形顆粒法向與切向接觸之等效線性彈簧值之推導與驗證
★ 以四面體離散化多面體系統之接觸分析與模擬	★ 軌道車輛三維動態脫軌係數之在線量測理論
★ 向量式DKMT厚殼元推導與模擬	★ 向量式預力混凝土二維剛架元之數值模擬與驗證
★ 向量式有限元應用於懸索橋非線性動力分析	★ 蛋形顆粒群之流固耦合分析
★ 複合版梁元素分析模型之橋梁動態識別法	★ 三維等效單軸應變與應力之材料組成模型
★ 人行吊橋的現有內力評估及動力分析	★ 薄殼結構非線性運動之向量式有限元分析法
★ 雷射掃描技術於鋼軌磨耗之檢測	★ 動態加載下的等效單軸應變與應力材料組成模型

檔案

[Endnote RIS 格式]

[Bibtex 格式]

[相關文章]

[文章引用]

[完整記錄]

[館藏目錄]

至系統瀏覽論文 ( 永不開放)

摘要(中)

使用無人機攜帶相機進行結構表面劣化缺陷的檢測是近期熱門的研發議題。這種非接觸式的影像量測方式；最關鍵的技術則是如何精準量測得缺陷的尺寸(長、寬、面積)。
本文將探討使用雷射打點方式量測結構物裂縫尺寸。藉由雷射校正影像座標中歪斜之成像。在校正過程中，首先求得攝影機內部參數並且考慮鏡頭的旋轉以及焦距問題，可推得由二維影像座標轉換成三維空間座標的轉換矩陣，並利用其他的分析方式，來達到工程檢測中之最大效能，提出有效的數學方式，減少工程檢測中之人事以及時間成本，不僅可達到空間校正更可以偵測出空間待測物之形狀起伏，在攝影機與空間校正上也將更為精準，精密量化尺寸，藉由Matlab 模擬來驗證理論結果，並展現此方法之成果。

摘要(英)

The detection of structural surface deterioration defects using drones with cameras is a hot research topic recently. This non-contact image measurement method; the most critical technology is how to accurately measure the size (length, width, area) of the defect.
This article will discuss the use of laser spotting to measure the size of cracks in structures. Image skew in image coordinates is corrected by laser. In the calibration process, the internal parameters of the camera are first obtained and the rotation and focal length of the lens are considered. The conversion matrix from the two-dimensional image coordinates to the three-dimensional space coordinates can be derived, and other analysis methods are used to achieve the most accurate engineering detection. To maximize performance, it proposes an effective mathematical method to reduce personnel and time costs in engineering monitoring. It can not only achieve spatial calibration, but also detect the shape fluctuations of the object to be measured in space. It will also be more accurate in camera and spatial calibration. The dimensions are precisely quantified, the theoretical results are verified by Matlab simulations, and demonstrate the results of this method.

關鍵字(中)

★ Matlab影像分析
★ 影像匹配

關鍵字(英)

★ Matlab image analysis
★ image matching

論文目次

中文摘要 i
Abstract ii
表目錄 IV
圖目錄 VI
第1章、緒論 1
1.1 研究方法 1
1.2 研究架構與流程 2
第2章、文獻回顧 4
2.1 橋梁檢測 5
2.1.1 橋梁檢測方式分類 6
2.1.2 DER&U 評估法 7
2.2 裂縫種類評估 8
2.3 使用無人機輔助橋梁裂化檢測 9
2.4 空間影像擷取之非接觸式測量原理 10
2.5 裂縫尺寸之影像判別方法 11
2.1.3 裂縫長度判定 15
2.1.4 裂縫寬度判定 16
第3章、影像處理原理與技術 19
3.1 單應性矩陣(Homography Matrix)理論 27
3.2 基礎矩陣(Fundamental Matrix)理論 30
3.3 歪斜影像之正射化校正法 33
3.4 空間雷射投影理論之方法 38
第4章、裂縫影像分析之預處理 40
4.1 灰階影像 40
4.2 直方圖均衡化 41
4.3 中值濾波器 43
4.4 影像均值平滑化去噪 44
4.5 影像二值化分析 45
4.6 裂縫邊緣偵測 49
4.6.1 水平投影之裂縫寬度 54
4.7 光斑質心自動化搜尋 56
第5章、平行雷射光斑攝影量測技術 64
5.1 雷射系統 64
5.1.1 雷射規格簡介 64
5.1.2 相機元件參數擷取 65
5.2 影像校準 66
5.3 實驗儀器與雷射點平行校準流程 70
第6章、裂縫影像形態學分析 72
6.1 裂縫辨識流程 72
6.2 程式操作 72
6.3 裂縫雷射投影點正射化及比例尺關係 76
6.4 使用者閾值自適化 79
6.5 裂縫軌跡範圍搜尋 81
6.6 裂縫軌跡跟蹤 85
第7章、結論與建議 92
7.1 結論 92
7.2 建議 92
參考文獻 94
附錄-A 8*11 25mm標定板 98
附錄-B Canon EOS 1Ds Mark III相機參數 99

參考文獻

AyeshaNasir, Nighat Shaheen, Kamran Ameen, Muhammad Adnan Khan, Muhammad Nadeem Ali, “CONTRAST ENHANCEMENT USING HISTOGRAM EQUALIZATION”, Proceedings of the 3rd International Conference on Engineering & Emerging Technologies (ICEET), Superior University, Lahore, PK, 7-8, April, 2016.
Abdel-Qader, I., Abudayyeh, O., Kelly, M.E., “Analysis of edge-detection techniques for crack identification in bridges”, Journal of Computing in Civil Engineering, 17(4), 255-263, 2003.
Barkavi, T. ,Natarajan, C., “Processing Digital Image for Measurement of Crack Dimensions in Concrete”, Department of Civil Engineering, National Institute of Technology Tiruchirappalli, June 2019.
Bang, Y.L.; Y.K. Yun, Y. Seong-Tae, et al., “Automated image processing technique for detecting and analyzing concrete surface cracks [J]”, Struct. Infrastruct. Eng. 9, 567–577, 2013.
Cail, Youfa; Xing Fu, China Yanna Shang , Jingxin Shi, “Methods for Long-Distance Crack Location and Detection of Concrete Bridge Structures”, State Key Laboratory of Precision Measurement Technology and Instruments Tianjin University,Beijing Instrument Industry Research Institute Beijing City, China.
Chien, Hsiang-Jen, “Beginner′s guide to fundamental matrix, essential matrix and camera motion recovery”, 2016.
Canny, J., “A Computational Approach To Edge Detection”, IEEE Transactions on Pattern Analysis and Machine Intelligence, 8(6):679–698, 1986.
Fang, Zhi,Peng Haitao, “Crack width test of surface of concrete bridge structure based on image analysis technology”, J. Hunan Univ. 39 (1), 7–12, 2012.
Hsiang-Jen (Johnny) Chien, “Beginner’s Guide to Fundamental Matrix, Essential Matrix and Camera Motion Recovery”, 2016.
Kabir, S. and Rivard, P., “Damage classification of concrete structures based on grey level co-occurrence matrix using Haar′s discrete wavelet transform”, Computers and Concrete, 4(3), 243-257, 2007.
Kalman, Dan, “A Singularly Valuable Decomposition: The SVD of a Matrix”, The American University, 2002.
Li, S. and An, X., “Method for estimating workability of self-compacting concrete using mixing process images” , Computers and Concrete, 13(6), 781-798, 2014.
Lattanzi, D., Miller, G.R., “Robust automated concrete damage detection algorithms for field applications”, Journal of Computing in Civil Engineering, 28(2), 253-262, 2014.
Lins, R.G., S.N. Givigi, “Automatic crack detection and measurement based on image analysis [J]”, IEEE Instrum. Meas. Mag., 1–8, 2016.
Malis, Ezio, Manuel Vargas, “Deeper understanding of the homography decomposition for vision-based control”, Thème Num —Systèmes numériques Projet AROBAS, 2007.
Man, Yunze, Xinshuo Weng, Xi Li, Kris Kitani, “Ground Net: Monocular Ground Plane Normal Estimation with Geometric Consistency”, Proceedings of the 27th ACM International Conference on Multimedia, October, 2170–2178, 2019.
Mohammadizadeh, M., “Identification of Structural Defects Using Computer Algorithms”, Civil Engineering Infrastructures Journal, 51(1), 55-86, 2018.
Nguyen, H.N., Kam, T.Y., Cheng, P.Y., “A Novel Automatic Concrete Surface Crack Identifcation Using Isotropic Undecimated Wavelet Transform”, IEEE International Symposium on Intelligent Signal Processing and Communication Systems (ISPACS 2012), November 4–7, 766–771, 2012.
Önal, O., Özden, G., Felekoglu, B., “A methodology for spatial distribution of grain and voids in self-compacting concrete using digital image processing methods”, Computers and Concrete 5(1), 61-74, 2008.
Otsu, N., “A Threshold Selection Method from Gray-Level Histogram”, IEEE Transactions on System Man Cybernetics 9(1), 62-66, 1979.
O. Chum, T. Pajdla, P. Sturm, “The Geometric Error for Homographies”, Computer Vision and Image Understanding 97(1), 86–102, 2005.
Peng, Xiong; Xingu Zhong ,Chao Zhao,Y. Frank Chen, Tianyu Zhang, “The Feasibility Assessment Study of Bridge Crack Width Recognition in Images Based on Special Inspection UAV”, Advances in Civil Engineering Volume, 2020.
Prasanna, P., Dana, K., Gucunski, N., Basily, B., “Computer-vision based crack detection and analysis, in SPIE Smart Structures and Materials+ Nondestructive Evaluation and Health Monitoring”, International Society for Optics and Photonics, 2012.
Su, M.C.; JH Chen, R. Cao, J.C. Lu SC Hsu, “A self organizing map optimization based image recognition and processing model for bridge crack inspection’’, Autom. Constr. 73, 58–66, 2016.
Talabab, Ahmed Mahgoub Ahmed; Zhangcan Huang, Fan Xia, Liu HaiMing, “Detection crack in image using Otsu method and multiple filtering in image processing techniques [J] ”, Optik 127 (3), 1030–1033, 2016.
Xia, Xiao Chun, Chu Yu, Zhang Qing, “Texture image segmentation using level set function evolved by Gaussian mixture model [J]” ,Chin. J. Comput. 33,1295–1304, 2010.
Xu, Yiye, “Bridge Inspection Using Bridge Information Modeling (BrIM) and Unmanned Aerial Systems (UASs)”, Oregon State University, thesis, 2018.
Yu, S.N., Jang, J.H. and Han, C.S., “Auto inspection system using a mobile robot for detecting concrete cracks in a tunnel”, J. Comput. Civil Eng. 17 (4), 255– 263, 2006.
Zhengyou, “Flexible Camera Calibration By Viewing a Plane From Unknown Orientations”, Microsoft Research, One MicrosoftWay, Redmond, USA.
Zhong, Xingu; Xiong Peng, Shengkun Yan, Mingyan Shen, Yinyin Zhai, “Assessment of the feasibility of detecting concrete cracks in images acquired by unmanned aerial vehicles’’, Hunan University of Science and Technology, Xiangtan, Hunan, China, 49-57, 2018.
田原嫄，黄合成，「基於 CCD 攝像機成像的徑向畸變研究」，吉林大學機械科學與工程學院，Vol.30，No.2，2008。
黃成偉，陳良健，「時間序列之混凝土影像半自動裂縫變遷偵測」，國立中央大學土木工程研究所碩士論文，民國 91年。
詹皇祥，陳良健，田永銘，「近景數化影像半自動式混凝土裂縫量測」，國立中央大學土木工程研究所碩士論文，民國 96 年。
任守峰，唐新明，祝小勇，李傲，曲典，「一種高分七號衛星激光足印光斑質心的高精度提取算法」，蘭州交通大學測繪與地理信息學院，自然資源部國土衛星遙感應用中心，地理國情檢測技術應用國家地方聯合工程研究中心，甘肅省地理國情檢測工程實驗室，第十期，2021。
劉名昱，「混凝土之裂縫水利」，第五期，131~136頁，1995。
劉世桐，陳毅銘，李坤哲，黃志杰，陳國睿，「非接觸式量測及 AI 自動偵測裂縫於橋梁檢測之應用」，臺灣公路工程，第 47 卷，第 3 期，民國 110 年。
曾志煌，許書耕，巫柏蕙，「橋梁目視檢測評估手冊(草案)之研擬」，交通部運輸研究所，民國 100 年。
交通部公路總局，「公路橋梁檢測及補強規範」，民國107年。

指導教授

王仲宇(Chung-Yue Wang)

審核日期

2023-1-17

推文