SMT-ELS機聯網通訊協定的數據握手軟體設計和實作

以作者查詢圖書館館藏

、以作者查詢臺灣博碩士

、以作者查詢全國書目

、勘誤回報

、線上人數：36

、訪客IP：3.17.75.227

姓名

林致遠(Zhi-Yuan Lin) 查詢紙本館藏

畢業系所

通訊工程學系在職專班

論文名稱

SMT-ELS機聯網通訊協定的數據握手軟體設計和實作

相關論文

★ 深度卷積神經網路車牌辨識

★ 白帶魚形狀特徵擷取與魚種辨識

檔案

[Endnote RIS 格式]

[Bibtex 格式]

[相關文章]

[文章引用]

[完整記錄]

[館藏目錄]

至系統瀏覽論文 (2028-1-11以後開放)

摘要(中)

印刷電路板在台灣是具有相當高經濟規模的產業，而生產線設備管理與成本有直接關係，因此本研究提出SME-ELS機聯網通訊協定的數據握手軟體，滿足主機端與設備端傳輸數據的實時狀態，並且能夠增加及刪減連線設備的數量這兩個需求。透過TCP/IP將主機端與設備綁訂連線並對每台設備分配其專屬編號，再利用Socket API建立數據握手平台，在平台上可以進行增減設備的數量，最後整合上述系統並驗證。實驗結果顯示本文的軟體設計基於SEMI SME-ELS A1/A1.1通訊協定的數據握手原則下，系統透過握手邏輯訊號可以實時得知傳輸數據狀態，並且在數據握手平台增減設備數量，能應對產線設備的及時調整。

摘要(英)

Printed circuit boards are an industry with a relatively high economic scale in Taiwan, and production line equipment management is directly related to cost. Therefore, this research proposes a data handshake software based on the SME-ELS machine networking communication protocol, which is compatible with different brands and new and old equipment The communication protocol satisfies the real-time status of data transmission between the host and the device, and can increase or decrease the number of connected devices. Bind the host terminal with the device through TCP/IP and assign its own number to each device, then use SocketAPI to build a data handshake platform, on which the number of devices can be increased or decreased, and finally the above systems are integrated and verified. The experimental results show that our software design is based on the data handshake principle of the SEMI SME-ELS A1/A1.1 communication protocol. The system can know the status of the transmitted data in real time through the handshake logic signal, and the number of devices can be increased or decreased on the data handshake platform. Timely adjustment of production line equipment.

關鍵字(中)

★ 表面黏著劑數
★ 機聯網
★ 方法論

關鍵字(英)

論文目次

Abstract III
謝誌 IV
目錄 V
圖目錄 VII
表目錄 IX
第一章、緒論 1
1.1 研究背景 1
1.2 研究目的 3
1.3 論文架構 3
第二章、技術回顧 4
2.1 機聯網 4
2.1.1 機聯網的架構 4
2.1.2典型的機聯網通訊協定 5
2.2 SEMI-ELS A1/A1.1協定內容 6
2.3 Socket API 8
2.4 MIAT系統設計方法論 10
2.4.1 IDEF0階層式架構 11
2.4.2 Grafcet離散事件建模 12
2.4.3 高階軟體合成 13
第三章、數據握手模型系統 16
3.1 傳送端握手軟體系統架構 16
3.2 接收端握手軟體系統架構 20
3.3 軟體高階合成 23
第四章、軟體驗證 25
4.1 開發環境 25
4.2 數據握手原則 25
4.3 數據握手軟體驗證 27
4.3.1 建立連線 27
4.3.2 數據握手 29
4.3.3 驗證傳接收數據 30
4.3.4 數據接收完畢 32
4.3.5 連線通訊異常 33
第五章、結論與未來展望 35
5.1 結論 35
5.2 未來展望 36
參考文獻 37

參考文獻

[1] G. Bhandari et al., "An Implementation of an Industrial Internet of Things on an SMT Assembly Line," 2020 International Conference on COMmunication Systems & NETworkS (COMSNETS), pp. 688-690, 2020.
[2] N. Aggarwal, M. Deshwal and P. Samant, "A Survey on Automatic Printed Circuit Board Defect Detection Techniques," 2022 2nd International Conference on Advance Computing and Innovative Technologies in Engineering (ICACITE), pp. 853-856 , 2022.
[3] Y. K. Chen, "Challenges and opportunities of internet of things," 17th Asia and South Pacific Design Automation Conference, pp. 383-388, 2012.
[4] C. H. Chen, M. Y. Lin, Y.C. Shih, "High-Precision Time Synchronization Chip Design for Industrial Sensor and Actuator Network", Microprocessors and Microsystems, Volume 91, 104507, June 2022.
[5] G. A. Akpakwu, B. J. Silva, G. P. Hancke and A. M. Abu-Mahfouz, "A Survey on 5G Networks for the Internet of Things: Communication Technologies and Challenges," in IEEE Access, vol. 6, pp. 3619-3647, 2018.
[6] C. H. Chen, C.T. Liu,"A 3.5-Tier Container-Based Edge Computing Architecture", Computers and Electrical Engineering, Volume 93, 107227, July 2021.
[7] T. C. Chan, "The Development of Smart Manufacturing and Cases Study in Taiwan," 2018 IEEE International Conference on Advanced Manufacturing (ICAM), pp. 117-118, 2018.
[8] B. Chen, J. Wan, L. Shu, P. Li, M. Mukherjee and B. Yin, "Smart Factory of Industry 4.0: Key Technologies, Application Case, and Challenges," in IEEE Access, vol. 6, pp. 6505-6519, 2018.
[9] X. Jia, Q. Feng, T. Fan and Q. Lei, "RFID technology and its applications in Internet of Things (IoT)," 2012 2nd International Conference on Consumer Electronics, Communications and Networks (CECNet), pp. 1282-1285, 2012.
[10] M. Wollschlaeger, T. Sauter and J. Jasperneite, "The Future of Industrial Communication: Automation Networks in the Era of the Internet of Things and Industry 4.0," in IEEE Industrial Electronics Magazine, vol. 11, no. 1, pp. 17-27, March 2017 .
[11] S. Aust, R. V. Prasad and I. G. M. M. Niemegeers, "IEEE 802.11ah: Advantages in standards and further challenges for sub 1 GHz Wi-Fi," 2012 IEEE International Conference on Communications (ICC), pp. 6885-6889, 2012
[12] Jin-Shyan Lee, "Performance evaluation of IEEE 802.15.4 for low-rate wireless personal area networks," in IEEE Transactions on Consumer Electronics, vol. 52, no. 3, pp. 742-749, Aug. 2006
[13] M. Ballerini, T. Polonelli, D. Brunelli, M. Magno and L. Benini, "NB-IoT Versus LoRaWAN: An Experimental Evaluation for Industrial Applications," in IEEE Transactions on Industrial Informatics, vol. 16, no. 12, pp. 7802-7811, Dec. 2020
[14] G. Prytz, "A performance analysis of EtherCAT and PROFINET IRT," 2008 IEEE International Conference on Emerging Technologies and Factory Automation, pp. 408-415, 2008
[15] C. H. Chen, M. Y. Lin, and X. C. Guo, “High-level modeling and synthesis of smart sensor networks for Industrial Internet of Things,” Computers and Electrical Engineering, vol. 61, pp. 48–66, 2017.
[16] R. J. Mayer, “IDEF0 function modeling,” Air Force Systems Command, 1992.
[17] R. David, "Grafcet: a powerful tool for specification of logic controllers," in IEEE Transactions on Control Systems Technology, vol. 3, no. 3, pp. 253-268, Sept. 1995

指導教授

陳永芳陳慶瀚

審核日期

2023-1-17

推文