Laboratory Investigation Wax-Based Warm Mix Binder

以作者查詢圖書館館藏

、以作者查詢臺灣博碩士

、以作者查詢全國書目

、勘誤回報

、線上人數：62

、訪客IP：3.142.55.62

姓名

拉瑪瓦提(Fajar Rahmawati) 查詢紙本館藏

畢業系所

土木工程學系

論文名稱

(Laboratory Investigation Wax-Based Warm Mix Binder)

相關論文

★ Engineering and Environmental Analysis of Maintenance Interval in Taiwan Freeway -the Case of Guanxi Section	★ 3D 鋪面調查車之驗證與國道應用分析
★ 營建剩餘土石方物流監控及管理系統之建置	★ 透水性鋪面保水與溫差成效之評估 -以中壢市龍慈路為例
★ 以生命週期評估滾筒碴與轉爐石應用於瀝青混凝土之研究	★ 傳統單點雷射與2D雷射應用於平坦度之比較研究
★ 鋪面劣化影像自動辨識應用於鋪面巡查精進研究	★ 自動化鋪面破壞影像辨識系統導入鋪面破壞維護管理系統之研究
★ 以ETC大數據結合FWD建立台灣區高速公路鋪面結構評估準則之研究	★ The Comparison Study of Various Surface Maintenance Alternatives in Taiwan Freeway
★ The Preliminary Study of conducting Pavement Maintenance Model for Taiwan Provincial Highways using Life-Cycle Cost Analysis	★ 冷拌再生瀝青混凝土應用於管線挖掘回填層之可行性研究
★ 台灣現行修補材料運用於柔性鋪面表層裂縫與坑洞修補之耐久性初步探討	★ 以車載藍光雷射建構國道鋪面抗滑值與二維紋理之關聯模型
★ 以不同光譜雷射應用於鋪面平坦度量測之綜合性評估	★ 冷拌再生瀝青混凝土應用於道路管線挖掘回填工程之現地驗證

檔案

[Endnote RIS 格式]

[Bibtex 格式]

[相關文章]

[文章引用]

[完整記錄]

[館藏目錄]

[檢視]

[下載]

本電子論文使用權限為同意立即開放。
已達開放權限電子全文僅授權使用者為學術研究之目的，進行個人非營利性質之檢索、閱讀、列印。
請遵守中華民國著作權法之相關規定，切勿任意重製、散佈、改作、轉貼、播送，以免觸法。

摘要(中)

瀝青混合料的生產受到限制，以節約資源和減少污染。熱拌瀝青 (HMA) 技術在瀝青混

合料生產過程中消耗大量能源。然而，溫拌瀝青 (WMA) 可能會通過降低混合和壓實

溫度來降低守恆能量。長期以來，人們對將蠟作為瀝青粘合劑中的流變增強劑有很大

興趣。 Sasobit (S) 和聚乙烯 (PE) 蠟可降低粘溫並提高可加工性。在這項研究中，來自

一家台灣公司的 S 和 PE 與 1% - 5% 的不同百分比的粘合劑一起使用。在兩種不同速

度下進行機械混合：1000 rpm 和 2000 rpm 用於查看基於粘合劑流變特性的混合方法

的效果。為了確定用於溫拌粘合劑的蠟添加劑的最佳百分比，進行了流變學和化學測

試。該測試包括以下參數：針入度、延展性、軟化點、粘度、動態剪切流變儀 (DSR)、

車轍、疲勞和用於化學檢測的薄層色譜/火焰離子化檢測 (TLC-FID)。根據流變學測試，

添加更多的蠟添加劑可以提高粘合劑的剛度，同時降低其在高溫下的粘度。與 1000

rpm 相比，在 2000 rpm 下混合具有更大的降低，這在降低生產和混合溫度方面具有

顯著優勢。綜合各項研究的流變性能，PE-G 的性能可與 S 相媲美。使用 3%的蠟添加

劑是台灣溫拌粘合劑的理想用量。它能夠滿足台灣高溫路面的施工標準（PG70）。

但是，建議使用多種蠟添加劑對瀝青混凝土樣品進行測試，以獲得更好的性能解釋。

摘要(英)

Asphalt mix production has been limited to conserve resources and reduce pollution. Hot mix

asphalt (HMA) technologies consume a significant amount of energy during asphalt mix

production. However, warm-mix asphalt (WMA) might decrease the conserved energy by

lowering the mixing and compaction temperature. There has long been a lot of interest in the

incorporation of waxes as the rheological enhancer in binders of asphalt. Sasobit (S) and

Polyethylene (PE) waxes reduce viscosity-temperature and improve workability. In this study,

S and PE from a Taiwan company were used with varying percentages of 1% - 5% by mass of

binder. While mechanical blending at two different speeds: 1000 rpm and 2000 rpm was utilized

to see the effect of the blending method based on the binder′s rheological characteristics. In

order to identify the optimal percentage of wax additives for warm mix binders, rheological and

chemical tests were carried out. The test includes the following parameters: penetration,

ductility, softening point, viscosity, dynamic-shear rheometer (DSR), rutting, fatigue, and thinlayer

chromatography/flame

ionization

detection

(TLC-FID)

for

chemical

detection.

According

to

rheological testing, adding more wax additives could improve the stiffness of the binder

while lowering its viscosity at high temperatures. Mixing at 2000 rpm having a greater decrease

compared to 1000 rpm which has a significant benefit in lowering production and mixing

temperatures. Based on all the rheological performance in study research, the performance of

PE-G is comparable to S. The use of 3% wax additives is the ideal amount to utilize in Taiwan′s

warm mix binder. It is able to fulfill Taiwan′s construction criteria for pavements in hot

temperatures (PG70). However, it is recommended to conduct asphalt concrete samples using

several wax additives for better performance interpretation.

關鍵字(中)

★ Sasobit
★ 聚乙烯蠟
★ 溫拌瀝青
★ 流變學
★ 車轍
★ 疲勞

關鍵字(英)

★ Sasobit
★
★ Polyethylene wax
★
★ Warm mix asphalt
★
★ Rheological
★
★ Rutting
★
★ Fatigue

論文目次

摘要 ............................................................................................................................................ i

Abstract ...................................................................................................................................... ii

Acknowledgments .................................................................................................................... iii

Table of Contents .................................................................................................................... iiv

List of Figures ......................................................................................................................... viii

List of Table ........................................................................................................................... viii

List of Abbreviations ................................................................................................................ ix

List of Symbols .......................................................................................................................... x

I. Introduction ............................................................................................................................ 1

1-1 Research Backgrounds ..................................................................................................... 1

1-2 Research Objectives ......................................................................................................... 2

1-3 Research Scopes .............................................................................................................. 2

1-4 Study Flowchart ............................................................................................................... 2

II. Literature Review ................................................................................................................. 4

2-1 Warm Mix Asphalt Technologies ................................................................................... 4

2-2 Wax in Asphalt Binder .................................................................................................... 5

2-3 Sasobit ............................................................................................................................. 6

2-4 Polyethylene Wax (PE) ................................................................................................... 6

2-5 Effects of Waxes Warm Mix Binder ............................................................................... 6

2-5-1 Temperature Reduction with Viscosity Test ............................................................ 7

2-5-2 Rutting Resistance (G*/sin δ) .................................................................................. 7

2-5-3 Fatigue Resistance (G*sin δ) .................................................................................... 8

2-5-4 Asphalt Binder Aging Phenomena ........................................................................... 8

2-6 Asphalt Chemical Components ....................................................................................... 8

III. Methodology ...................................................................................................................... 10

3-1 Material and Test Procedures ........................................................................................ 10

3-2 Rheological Properties of Asphalt Binder ..................................................................... 10

3-2-1 Penetration .............................................................................................................. 11

3-2-2 Softening0Point ...................................................................................................... 12

3-2-3 Ductility .................................................................................................................. 12

3-2-4 Viscosity ................................................................................................................. 13

3-2-5 Mixing and Compaction Temperature .................................................................... 14

3-2-6 TemperatureoSusceptibility .................................................................................... 14

3-2-7 DSR Test................................................................................................................. 14

3-3 Aging of Asphalt Binder ............................................................................................... 15

3-3-1 Rutting Performance (G*/sin δ).............................................................................. 16

3-3-2 Fatigue Performance (G*sin δ) ............................................................................... 17

3-4 Chemical Properties of Asphalt Binder (TLC-FID) ...................................................... 17

IV. Result and Discussion ....................................................................................................... 19

4-1 Rheological Properties of Asphalt Binder ..................................................................... 19

4-1-1 Penetration .............................................................................................................. 19

4-1-2 Softening Point ....................................................................................................... 21

4-1-3 Ductility .................................................................................................................. 22

4-1-4 Viscosity ................................................................................................................. 24

4-1-5 Mixing and Compaction Temperature .................................................................... 24

4-1-6 Temperature Susceptibility ..................................................................................... 27

4-1-7 DSR Test (G*/sin δ) ............................................................................................... 30

4-2 Aging of Asphalt Binder ............................................................................................... 36

4-2-1 Rutting Performance (MSCR) ................................................................................ 36

4-2-2 Fatigue Performance ............................................................................................... 38

4-3 Chemical Properties of Asphalt Binder (TLC-FID) ...................................................... 39

4-4 Optimum Performance Wax-Based Warm Mix Additive ............................................. 41

V. Conclusion and Recommendation ...................................................................................... 43

5-1 Conclusions ................................................................................................................... 43

5-2 Recommendations ......................................................................................................... 43

References.........................................................................................................44

Appendix ................................................................................................................................ 54

參考文獻

[1] Y. Edwards, Influence Of Waxes On Bitumen And Asphalt Concrete Mixture

Performance, Stockholm: KTH Ature And The Built Environmentrchitec, 2014.

[2] A. J. a. G. White, "“The Challenges of Warm Mix Asphalt as a Mature Technology,”,"

in Proceedings of the 9th International Conference on Maintenance and Rehabilitation

of Pavements, 2020.

[3] Goshtasp Cheraghian, Augusto Cannone Falchetto, Zhanping You, Siyu Chen, Yun Su

Kim, Jan Westerhoff, Ki Hoon Moon, Michael P. Wistuba, , "Warm mix asphalt

technology: An up to date review," Journal of Cleaner Production, vol. 268, 2020.

[4] B. Kheradmanda, R. Muniandya, L. T. Huaa & A. Soloukia, "A Laboratory Investigation

on the Rheological Properties of Aged and Unaged Organic Wax Modified Asphalt

Binders," Petroleum Science and Technology, vol. 33:7, pp. 757-764, 2015.

[5] Luca Desidery and Michele Lanotte, "Effect of Waste Polyethylene and Wax-Based

Additives on Bitumen Performance," MDPI, vol. 13, p. 3733, 2021.

[6] Meor Othman Hamzah,Seyed Reza Omranian, and Babak Golchin, "A review on the

effects of agimg on properties of asphalt binders and mictures," Caspian Journal of

Applied Sciences Research, vol. 4, pp. 15-34, 2015.

[7] Rean Maharaj, Vitra Ramjattan-Harry, and Nazim Mohamed, "Rutting and Fatigue

Cracking Resistance of Waste Cooking Oil Modified Trinidad Asphaltic Materials," The

Scientific World Journal, 2015.

[8] Guilian Zou, Jian Xu, Chung Wu, "Evaluation of Factors that Affect Rutting Resistance

of Asphalt mixes by Orthogonal Experiment Design," International Journal of Pavement

Research and Technology, vol. 16, pp. 30078-5, 2017.

[9] Yassir Abo Almaali1, and Shakir Al-Busaltan, "Effect of Aggregate Gradation on Rutting

of Thin Asphalt," in Conf. Series: Materials Science and Engineering, Iraq, 2020.

[10] Yu Zhang, Qingqing Song, Quan Lv, Hongxin Wang, "Influence Of Different

Polyethylene Wax Additives On The Performance Of Modified Asphalt Binders And

Mixtures," Construction And Building Materials, Vol. 302, P. 124115, 2021.

[11] Murat Kucukvar, Mehdi Noori, Gokhan Egilmez, "Stochastic Decision Modeling For

Sustainable Pavement Designs," International Joyrnal Springer Life Cycle Assess, 2014.

[12] Majid Harooni Jamaloei, Mohsen Aboutalebi Esfahani, Mohammad Filvan Torkaman3,

"Rheological And Mechanical Properties Of Bitumen Modified With Sasobit,

Polyethylene,Parrafin, And Their Mixture," ASCE Material Civil Engineering, Vol.

31(7), Pp. 1-19, 2019.

[13] Jizhe Zhanga, Changjun Sun, Ming Lianga, Hongguang Jiang, "Enhancement Of Rutting

Resistance And Fatigue Behavior Of Asphalt Mixtures Modified By Recycled," In

Notthingham Core, UK, 2020.

[14] Aboelkasim Diab, Rouzbeh Ghabchi & Musharraf Zaman, Amr M. Wahaballa, "Warm

Mix Asphalt (WMA) Technologies: Benefits And Drawbacks," Functional Pavement

Design – Erkens Et Al., Pp. 02924-8, 2016.

[15] C. Estakhri, J. Button, And A. E. Alvarez,, "“Field And Laboratory Investigation Of

Warm Mix Asphalt In Texas Texas Transportation Institute, Texas, 2010.

[16] J. D’angelo Et Al, "Warm-Mix Asphalt: European Practice," Department Of

Transportation,Fhwa, Washington, Dc, Alexandria, 2008.

[17] Hurley, G.C., Prowell, B.D. And Kvasnak, A.N, "Field Trial Of Warm Mix Asphalt

Technologies: Construction Summary," NCAT Report, Ohio, 2009.

[18] B. D. Prowell, G. C. Hurley, P.E., And B. Frank, , "Warm-Mix Asphalt," National

Asphalt Pavement Assosiation, 2012.

[19] A. Kavussi And L. Hashemian, , “Laboratory Evaluation Of Moisture Damage And

Rutting Potential Of Wma Foam Mixes＂, International Journal Pavement Engineering,

Vol. 13 No.5, Pp. 415-423, 2012.

[20] Hussein A. Kassem & Ghassan R. Chehab, "Characterisation of the mechanical

performance of asphalt concrete mixtures with selected WMA additives," International

Journal of Pavement Engineering, p. 1018, 2019.

[21] S. C. Wax, "" Roads and Trials with Sasobit®., 2005..

[22] Riccardo Lamperti , James Grenfell , Cesare Sangiorgi Claudio Lantieri , Gordon D.

Airey, "Influence of waxes on adhesion properties of bituminous binders," Construction

and Building Materials, vol. 76, pp. 404-412, 2015.

[23] Boucher J. L., "“Wax in asphalt - a literature review”," SHRP by Southwestern

Laboratories, Houston Texas,, 1991.

[24] P. L. L. B. P. J. P. G. J. P. Such C., “Les paraffines dans les bitumens＂, in Eurasphalt

& Eurobitume Congress, French, 2000.

[25] E. Y, "Influence of waxes on bitumen and asphalt concrete mixture performance,," Road

Materials and Pavement Design, vol. 10(2), pp. 313-335, 2009.

[26] Lu, X., Langton, M., Olofsson, P., Redelius, P., "Wax morphology in bitumen.," Journal

of Materials Science, pp. 1893-900, 2005.

[27] Musser, B.J., Kilpatrick, P.K., "Molecular characterization of wax isolated from a variety

of crude oils,," Energy Fuels, vol. 12(4), pp. 715-25, 1998.

[28] Lu, X., Redelius, P, "Effect of bitumen wax on asphalt mixture performance,"

Construction and Building Materials, vol. 21(11), pp. 1961-1970, 2007.

[29] P.K., Kringos, N., Wallqvist, V., Birgisson, B, "Micromechanical investigation of phase

separation in bitumen by combining AFM with DSC results," Road Materials and

Pavement Design, pp. 25-37, 2013.

[30] Julide Oner, Burak Sengoz, Natalia Maidanova, Ali Topal, "Evaluation of rheological

effects of waxes on bitumen from different sources," in 6th Eurasphalt & Eurobitume

Congress, Prague, 2016.

[31] "Bitumen and bituminous binders – determination of the paraffin wax content," European

Standard EN 12606-1, Europe, 2007.

[32] Y. .. R. P. Edwards, "Rheological effects of waxes in bitumen," Energy and Fuels, vol.

17(3), pp. 511-520, 2003.

[33] X. R. P. Lu, "Compositional and Structural Characterization of Waxes Isolated/n from

Bitumens,," American Chemical Society: Energy & Fuels, vol. 20(2), pp. 653-660, 2006.

[34] Jenny Liu and Peng Li, "Low Temperature Performance of Sasobit-Modified Warm-Mix

Asphalt," Journal of Materials in Civil Engineering, vol. 24(1), pp. 57-63, 2012.

[35] Wu C, Zeng M., "Effects of additives for warm mix asphalt on performance," Journal

test Evaluation, vol. 40(2), pp. 265-72, 2011.

[36] Qian Qin, Michael J. Farrar, Adam T. Pauli, Jeramie J. Adams, "Morphology, thermal

analysis and rheology of Sasobit modified warm mix asphalt binders," the science and

technology of Fuel and Energy, vol. 115, pp. 416-425, 2014.

[37] Muhammad Sohail Jameel · Hafiz Muhammad Abubakar · Ali Raza · Sohail Iqbal · Raja

Abubakar Khalid, "Effect of Aging on Adhesion and Moisture Damage of Asphalt:A

Perspective of Rolling Bottle and Bitumen Bond Strength Test," International Journal of

Pavement Research and Technology, pp. 00021-5, 2021.

[38] Qishi Li, Henglong Zhang, Zihao Chen , "Improvement of short-term aging resistance of

styrene-butadiene rubber modified asphalt by Sasobit and epoxidized soybean oil,"

Construction and Building Materials, vol. 271, p. 121870, 2021.

[39] Haibo Ding and Simon A. M. Hesp, "Balancing the Use of Wax-Based Warm Mix

Additives for Improved Asphalt Compaction with Long-Term Pavement Performance,"

ACS Sustainable Chemistry and Engineering, vol. 9, pp. 7298-7305, 2021.

[40] Bo Li, Jinyu Yang, Xiaohui Li, Xiang Liu , Feng Han and Liangying Li, "Effect of ShortTerm

Aging Process on the Moisture Susceptibility of Asphalt Mixtures and Binders

Containing Sasobit Warm Mix Additive," Advances in Materials Science and

Engineering, no. Hindawi Publishing Corporation, 2015.

[41] Y. Edwards, Y. Tasdemir, U. Isacsson, "Effects of commercial waxes on asphalt oncrete

mixtures performance at low and medium temperatures," Cold Regions Science and

Technology, vol. 45, no. 1, pp. 31-41, 2006.

[42] Y. Tasdemir, "High temperature properties of wax modified binders and asphalt

mixtures," Construction and Building Materials, vol. 23, pp. 3220-3224, 2009.

[43] He Gui-ping, Wong Wing-gun, "Laboratory study on permanent deformation of foamed

asphalt mix incorporating reclaimed asphalt pavement materials," Construction and

Building Materials, vol. 21, no. 8, pp. 1809-1819, 2006.

[44] Mohsen Aboutalebi Esfahani,Majid Harouni,Mohammad Filvan Torkaman,

"Rheological and Mechanical Properties of Bitumen Modified with Sasobit,

Polyethylene, Paraffin, and Their Mixture," Journal of Materials in Civil Engineering,

vol. 31, no. 7, pp. 04019119-1, 2019.

[45] J. Gao, K. Yan, W. He, S. Yang and L. You, " High temperature performance of asphalt

modified with Sasobit and Deurex," Construction and Building Materials, vol. 164, p.

783–791, 2018.

[46] Khalid A. Ghuzlan, Ph.D and Mohammad O. Al Assi, "Sasobit-Modified Asphalt Binder

Rheology," Journal of Materials in Civil Engineering , vol. 29, no. 9, pp. 04017142-1,

2017.

[47] K. Lakshmi Roja, Amara Rehman, Mabrouk Ouederni, Senthil Kumar Krishnamoorthy,

Ahmed Abdala & Eyad Masad , "Influence of polymer structure and amount on

microstructure and properties of polyethylene-modified asphalt binders," Materials and

Structures, vol. 54, 2021.

[48] Haopeng Zhang, Hong hang, haibo Ding, and Jin Dai, "Determining the Sustainable

Component of Wax-Based Warm Mix Additives for Improving the Cracking Resistance

of Asphalt Binders," ACS Sustainable Chemistry and Egineeering, vol. 9, pp. 1501615026,

2021.

[49] Taha A. Ahmed, Hosin David Lee, R.Christopher Williams, "Using A Modified Asphalt

Bond Strength Test To Investigate The," International Journal Of Pavement Research

And Technology, Vol. 11, Pp. 28-37, 2018.

[50] Mostafa Nakhaei, Mostafa Nakhaei, Aliasghar Akbari Nasrekani, And Dr. David H.

Timm, P.E.,, "Chemical, Rheological, And Moisture Resistance Properties Of Warm Mix

Asphalt Modified With Polyethylene-Wax," In 97th 5 Annual Meeting Of The

Transportation Research Board, Tehran, Iran, 2018.

[51] Abbas Solouki, Ratnasamy Muniandy, Hassim Salihudin, and Behnam Kheradmand,

"Rheological Property Investigation of Various Sasobit-modified Bitumen," Petroleum

Science and Technology, vol. 33, no. 7, pp. 773-779, 2015.

[52] Hassan Fazaeli, Hamid BehbahaniHi, Amir A. Amini, "High and Low Temperature

Properties of FT-Paraffin-Modified Bitumen," Advances in Materials Science and

Engineering, pp. 1687-8434, 2015.

[53] G. Airey, “Fundamental binder and practical mixture evaluation of polymer modified

bituminous materials＂, International Journal Pavement Engineering, vol. 5, no. 3, pp.

137-151, 2004.

[54] A. M. E. a. B. H. U. Hanz, “Impacts of WMA production temperatures on binder aging

and mixture flow number＂, Journal Associate Asphalt Paving Technology, vol. 80, pp.

459-490, 2011.

[55] Morteza Rezaeizadeh Herozi, Wilfredo Valenzuela, Alireza Rezagholilou, "New Models

for the Properties of Warm Mix Asphalt with Sasobit," MDPI, vol. 3, p. 347–364, 2022.

[56] Ching Yern Chee, Haryani Azahari, Mohamad Rehan, "Modification of Bitumen

Characteristic by Using Recycled Polyethylene," Molecular Crystals and Liquid

Crystals, vol. 604, no. 1, 2014.

[57] Muhammad Aakif Ishaq, Loretta Venturini, and Filippo Giustozzi, "Correlation Between

Rheological Rutting Tests on Bitumen and Asphalt Mix Flow Number," International

Journal of Pavement Research and Technology , vol. 15, no. 6, 2021.

[58] Muhammad Aakif Ishaq;Loretta Venturini;Filippo Giustozz, "Muhammad Aakif

Ishaq;Loretta Venturini;Filippo Giustozz," International Journal of Pavement Research

and Technology, 2021.

[59] J. D. a. D. W. M. Anderson, "Asphalt: The Magazine of The Asphalt Institute," Asphalt

Institute, March 2022.

[60] Khaleel Al-Adham and Hamad Al-Abdul Wahhab, "Influence of temperature on Jnr

values of polymer modified asphalt binders," International Journal of Pavement

Research and Technology, vol. 11, no. 6, pp. 603-610, 2018.

[61] K. A. Ghuzlan and M. O. Al Assi, "Sasobit-Modified Asphalt Binder Rheology.," Journal

of Materials in Civil Engineering, vol. 29, no. 9, 2017.

[62] Umme Amina Mannan, Md Rashadul Islam, Rafiqul A.Tarefder, "Effects of recycled

asphalt pavements on the fatigue life of asphalt under different strain levels and loading

frequencies," International Journal of Fatigue, vol. 78, pp. 72-80, 2015.

[63] Meor Othman Hamzah, Seyed Reza Omranian, Babak Golchin, "A Review on the Effects

of Aging on Properties of Asphalt Binders andMixtures," Caspian Journal of Applied

Sciences Research, vol. 4, no. 6, pp. 15-34, 2015.

[64] Shin-Che Huang, Hervé Di Benedetto, Advances in Asphalt Materials: Road and

Pavement Construction, United Kingdom: Woodhead Publishing Series in Civil and

Structural Engineerin, 2015.

[65] Ashoori et al, "The relationship between SARA fractions and crude oil stability,"

Egyptian Journal of Petroleum, vol. 26, no. 1, pp. 209-213, 2017.

[66] A. D.-2. "Standard Specification for Penetration-Graded Asphalt Binder for Use in

Pavement Construction," ASTM International, pp. 1-2, 2020.

[67] A. D.-1. "Standard Test Method for Softening Point of Bitumen (Ring-and-Ball

Apparatus)," ASTM International, pp. 1-2, 2020.

[68] H. F. "“Investigating effects of nano/SBR polymer on rutting performance of binder and

asphalt mixture,”," Advances in Materials Science and Engineering, vol. 10, pp. 1-7,

2018.

[69] ASTM D113-17, Standard Test Method for Ductility of Asphalt Materials, PA, United

States: ASTM International, 2017.

[70] ASTM D 4402, "“Standard Test Method for Viscosity Determination Using a Rotational

Viscometer,”," ASTM Standard, vol. 87, pp. 1-5, 2000.

[71] T. Bennert, "Mixing And Compaction Recommendations For Warm Mix Asphalt," The

State University of New Jersey, and U.S. Department of Transportation, USA, 2017.

[72] R. B. "Mix Design Practices for Warm-Mix Asphalt," ransportation Research Board, and

National Cooperative Highway, NCHRP Report 691, 2011.

[73] A. I. Commitee, " Determining Lab Mixing and Compaction Temperatures for Binders,"

AI, Lexington, KY, 2016.

[74] N. W. McLeod, "PVN as a Measure of Paving Asphalt Temperature Susceptibility, and

its Relationship to Paving Asphalt Specification," in McAsphalt Engineering Services,

Toronto, Canada, 1989.

[75] A. D. 7.-1. "Standard Test Method for Determining the Rheological Properties of Asphalt

Binder Using a Dynamic Shear Rheometer," ASTM International, pp. 1-5, 2017.

[76] AASHTO T240, Standard Method of Test for Effect of Heat and Air on a Moving Film

of Asphalt Binder (Rolling Thin-Film Oven Test), American Association of State

Highway and Transportation Officials (AASHTO), 2022.

[77] A. T. "Estimating Damage Tolerance of Asphalt Binders Using the Linear Amplitude

Sweep," American Association of State Highway and Transportation Officials, pp. 10114,

2001.

[78] A. D. 7.-2. "“Standard Test Method for Multiple Stress Creep and Recovery (MSCR) of

Asphalt Binder Using a Dynamic Shear Rheometer.”," ASTM Standard, pp. 5-20, 2020.

[79] A. D.-2. "Standard Test Method for Effect of Heat and Air on a Moving Film of Asphalt

Binder (Rolling Thin-Film Oven Test)," ASTM International, pp. 1-6, 2022.

[80] M. C. N. S. a. A. G. "“Introduction of a New Parameter to Quantify the Fatigue Damage

in Asphalt Mastics and Asphalt Binder, Coatings, vol. 11, no. 7, p. 828, 2021.

[81] A. D.-0. "“Standard Test Method for Separation of Asphalt into Four Fractions.”," ASTM

International, 2018.

[82] Ana M Rodríguez Pasandín and Ignacio Pérez PérezIgnacio Pérez Pérez, "Effects of

asphalt penetration grade and mineralogical composition on asphalt-aggregate bond,"

Petroleum Science and Technology, vol. 22, p. 32, 2014.

[83] Hassan Fazaeli, Hamid Behbahan, Amir Ali Amini,, "High and Low Temperature

Properties of FT-Paraffin-Modified Bitumen," Advanced in Materials Science and

Engineering, 2012.

[84] Abbas Solouki, Hassim Salihudin, Ratnasamy Muniandy, "EFFECT OF BLENDING

SPEEDS ON THE RHEOLOGICAL PROPERTIES OF SASOBIT," in Universiti Putra

Malaysia, Malaysia, 2014.

[85] Zahi Chamoun, Mena I. Souliman, Elie Y. Hajj, and Peter Sebaaly, "Evaluation of select

warm mix additives with polymer and rubber modified asphalt mixtures," Journal Civil

Engineering, vol. 42, pp. 377-388, 2015.

[86] F. Y. "Effect of wax-based," Construction Building Material, vol. 262, 2020.

[87] Lucidalva S. Pinheiro, Paulo R. N. Fernandes, Rivelino M. Cavalcante, Ronaldo F.

Nascimento, Jorge B. SoaresSandra A. SoaresJosé A. K. Freire, "Polycyclic aromatic

hydrocarbons from asphalt binder: extraction and characterization".

[88] Emad Kassem, Lorena Garcia Cucalon, Eyad Masad & Dallas Little, "Effect of warm

mix additives on the interfacial bonding characteristics of asphalt binders," International

Journal of Pavement Engineering, pp. 1-14, 2016.

[89] Kim, H., Lee, S.-J., and Amirkhanian, S. N. , "Hakseo Kim, Soon-Jae Lee, Serji

N.Amirkhanian," Construction and Building Materials, vol. 25, no. 1, pp. 183-189, 2011.

[90] W.J. Sichina, PerkinElmer Instruments, "Measurement of Tg by DSC," Thermal

Analaysis, Vols. PETech-09, 2000.

[91] Qian Qin, Mike Farrar, Thomas F. Turner, Jean-Pascal Planche, "Characterization of the

Effects of Wax (Sasobit®) on Asphalt Binder," Federal Highway Administration, no.

Western Research Institute, 2015.

[92] Redelius, P., Lu, X., Isacsson, U.,, "Non-classical wax in bitumen,," International

Journal of Road Materials and Pavement Design, vol. 3(1), 2002.

[93] S. R. "Relationships between SARA fractions of conventional oil, heavy oil, natural

bitumen, residues," Fuel, vol. 216, pp. 330-340, 2018.

[94] M P. &. N Rahi, "Rutting Characteristics of Styrene-Ethylene/Propylene-Styrene

Polymer Modified Asphalt," Journal of Materials in Civil Engineering, vol. 27, no. 4,

2015.

[95] M. Anderson, J. D′Angelo and D. Walker, "Asphalt: The Magazine of The Asphalt

Institute," Asphalt Institute, [Online]. Available: http://asphaltmagazine.com/mscr-abetter-tool-for-characterizing-high-temperature-performance-properties/.

[Accessed 20

March 2017].

[96] K. Kubo, "Recycling in Japan," Application of Reclaimed Asphalt Pavement and

Recycled Asphalt Shingles in Hot-Mix Asphalt, Vols. TR Circular E-C188, pp. 60-66,

2014.

[97] K. K, "Application of Reclaimed Asphalt Pavement and Recycled Asphalt Shingles in

Hot-Mix Asphalt," Recycling in Japan, vol. TR Circular, no. E-C1188, pp. 60-66, 2014.

[98] C. Nicholls, J. Valentin, L. Soukupova, K. Mollenhauer, BRRC, M. Tusar, N. Bueche, S.

Bressi, C. Karcher, F. Batista, M. S. d. Costa, G. Malkoc, TU Vienna and H. Soenen,

"Functional Durability-related Bitumen Specification (FunDBitS): Identified correlations

between bitumen and asphalt properties (Interim Report)," CEDR Call 2013: Energy

Efficiency – Materials and Technology, 2015.

[99] S. Ashoori, M. Sharifi, M. Masoumi and M. M. Salehi, "The relationship between SARA

fractions and crude oil stability," Egyptian Journal of Petroleum, vol. 26, no. 1, pp. 209213,

2017.

指導教授

陳世晃(Shih-Huang Chen)

審核日期

2023-1-18

推文