博碩士論文 109256013 詳細資訊




以作者查詢圖書館館藏 以作者查詢臺灣博碩士 以作者查詢全國書目 勘誤回報 、線上人數:68 、訪客IP:3.142.198.70
姓名 黃柏凱(Po-Kai Huang)  查詢紙本館藏   畢業系所 光電科學與工程學系
論文名稱 六倍變焦五百萬畫素之潛望鏡式手機鏡頭設計
相關論文
★ 白光LED於住宅照明之設計與應用★ 超廣角車用鏡頭設計
★ 適用於色序式微型投影機之微透鏡陣列積分器光學系統研製★ 發光二極體色溫控制技術及其於色序式微型投影機之應用
★ 光學變焦之軌跡優化控制★ LED光源暨LED與太陽光混和照明於室內照明之模擬與分析
★ 利用光展量概念之微型投影機光學設計方法與實作★ 光學顯微鏡之鏡頭設計
★ 手機上隱藏式指紋辨識設計★ DLP微型投影系統之光路設計
★ 高效率藍光碟片讀取頭★ 模組化雙波長光學讀寫頭的設計與光學讀寫頭應用在角度量測的研究
★ 數位相機之鏡頭設計★ 單光電偵測器之複合式光學讀寫頭
★ 三百萬畫素二點七五倍光學變焦手機鏡頭設計★ 稜鏡玻璃選取對色差的影響與校正
檔案 [Endnote RIS 格式]    [Bibtex 格式]    [相關文章]   [文章引用]   [完整記錄]   [館藏目錄]   至系統瀏覽論文 (2028-1-16以後開放)
摘要(中) 本論文提出可置入手機中的六倍變焦五百萬畫素之潛望鏡式手機鏡頭設計,為使鏡頭不突出手機外機構,鏡頭深度需小於手機內機構厚度,以iPhone做為參考,扣除手機兩面外殼厚度約3 mm後,手機內機構厚度為5 mm。
由於稜鏡會將物方光線的光軸反射90進入透鏡組,鏡頭深度定義為稜鏡厚度或鏡片Y軸方向兩者中最大口徑,鏡頭深度與感測器的Y方向長度、入瞳口徑、入瞳位置與Y方向的視角相關,當鏡頭深度小於手機機構內厚度時,鏡頭則可置入手機中。
以下為本論文的設計規格,有效焦距為3.27 mm至1.64 mm,半視角為29 至5.28 ,F/#為3.4至6.8,入瞳口徑為0.96 mm至2.89 mm。
本論文選取的感測器尺寸比例為4:3,在維持對角線高度不變的前提下,將尺寸比例改為16:9,可以縮減感測器的Y方向長度,達到減少入射光的Y方向視場角、縮減鏡頭有效口徑的效果,於設計鏡頭時,光學系統可以藉由控制與入瞳的距離調整最大有效口徑,當距離入瞳越遠,口徑會越大。
CodeV軟體內的真實光線追跡功能,由於感測器為長方形,可以根據軟體定義之參考光線找到鏡頭內每一片透鏡的最大有效口徑,切除透鏡非有效口徑的部分,圓形透鏡的X、Y方向長度相同,改為方型透鏡可以降低Y方向長度,使設計結果置入更小的手機內機構厚度空間。
綜上所述,為了使鏡頭深度小於手機內機構厚度5 mm,由於越高畫素的感測器其Y方向的視場角越大、鏡頭深度越大,八百萬畫素的感測器難以達到設計目標,故選用五百萬畫素的感測器,且為了進一步縮減入射光Y方向的視場角,故改良感測器尺寸比例4:3為16:9,再來考量到於有限的鏡頭深度去設計高變焦倍率會需要更多的鏡片或是非球面設計以滿足鏡頭光學品質設計目標,故選用六倍變焦來進行設計,最終,設計結果之鏡頭深度為4.98 mm,鏡頭總長度為31.9 mm,鏡頭可置入手機之中。
摘要(英) This thesis proposes a periscope-type zoom lens optical design which can be embedded in the mobile phone. In order to avoid the lens of mobile phone protrude from the casing, the lens depth of zoom lens must be less than the thickness of the mobile phone mechanism. Refer to the size of iPhone, the casing of mobile phone mechanism is about 3 mm, and the thickness is 5 mm without the casing of mobile phone mechanism.
The optical axis of object light will reflect by the prism and pass through the lens module and the lens depth is defined as the upper size limit of the prism thickness or the maximum surface aperture in the Y-direction of the zoom lens. The lens depth is related to the length of the sensor in the Y-direction, the entrance pupil diameter, the entrance pupil position, and the angle of view in the Y-direction. When the lens depth of zoom lens is less than the thickness of mobile phone mechanism, it can be embedded in the mobile phone.
The design specifications of this thesis include the effective focal length from 3.27 mm to 1.64 mm, the half field angle from 29 to 5.28, the F/# from 3.4 to 6.8, and the entrance pupil diameter from 0.96 mm to 2.89 mm.
In order to reduce the field angle in the Y-direction of incident light and lens aperture, we can reduce the length in the Y-direction of sensor by changing the ratio of sensor from 4:3 to 16:9, but keeping the diagonal height. When doing the lens design, we can adjust the maximum effective lens aperture by controlling the distance of entrance pupil, the longer the distance, the larger the lens aperture.
Because the sensor is rectangular type, we can define the maximum lens aperture of all the lenses by doing the real ray tracing, it is one of function in the CodeV. We can cut the ineffective part of every lens in the lens module, the shape of lenses will change form circle to square, it will make the result of lens design simpler to put into the smaller mobile phone.
In summary, we choose 5 mega pixels instead 8 mega pixels of sensor. It’s hard to reach our design target by using 8 mega pixels of sensor, because the more pixels, the field angle and lens depth are bigger. We improve the ratio of sensor dimension from 4:3 to 16:9, so, we could get smaller field angle in Y-direction. We also consider about the finite lens depth will need more lenses and aspherical lens to meet our optical performance design target when doing the higher zoom ratio design, therefore, we choose 6 zoom ratio as our design target. Finally, the design result of the lens depth is 4.98 mm, and the total length of zoom lens is 31.9 mm, so, it can be embedded in the mobile phone.
關鍵字(中) ★ 潛望鏡式
★ 變焦鏡頭
★ 方型透鏡
★ 16:9感測器
關鍵字(英) ★ Periscope-type
★ Zoom lens
★ Rectangular lens
★ 16:9 sensor
論文目次 摘要 I
Abstract III
致謝 V
目錄 VI
圖目錄 IX
表目錄 XIII
第一章 緒論 1
1-1 研究動機 1
1-2 研究目的 2
1-3 文獻回顧 3
1-4 章節概要 8
第二章 設計原理介紹 9
2-1 變焦鏡頭 9
2-2 直角稜鏡、光路展開圖 10
2-3 鏡頭深度定義 11
2-4 感測器 13
2-5 參考光線定義 16
2-6 有效焦距 17
2-6.1物位於無窮遠 17
2-6.2有效口徑與入瞳關係 18
2-6.3物方、像方折射率相等 19
2-6.4有效焦距計算 20
2-7 F/# 21
2-8 艾里斑(Airy disc) 22
第三章 六倍變焦五百萬畫素之潛望鏡式手機鏡頭設計 23
3-1 設計導論 23
3-2 設計規格 24
3-2.1感測器 24
3-2.2變倍比 26
3-2.3像高、半視角、焦距計算 26
3-2.4 F/# 27
3-2.5 MTF 27
3-2.6 |SMTF – TMTF| 28
3-2.7 橫向色差 29
3-2.8 光學畸變 29
3-2.9 電視畸變 30
3-3 設計規格與目標 30
3-4 起始值選取 31
3-5 優化設計流程 35
3-6 最大有效口徑 40
第四章 設計結果與討論 42
4-1 成像品質 44
4-2 畸變 48
4-3 橫向色差 51
4-4 相對照度 55
4-5 公差分析 56
4-6 設計結果比較 61
第五章 結論與未來展望 62
5-1 結論 62
5-2 未來展望 62
參考文獻 63

參考文獻 [1] R. I. Mercado, “Folded telephoto camera lens system,” U.S. patent 9,316,810 (Apr. 19, 2016).
[2] Y. C. Fang and H. L. Tsaib and Y. H. Chien, “2X optical digital zoom lens with short total length and extremely small front aperture for two million pixel CMOS on mobile phone,” Proc. SPIE 6342, (2006).
[3] S. C. Park and Y. J. Jo, “Ultra-slim zoom lens design for a 3x mobile camera,” J. Korean Phys Soc. 52(4), 1048-1056 (2008).
[4] S. C. Park ans S. H. Lee, “Compact zoom lens design for a 5x mobile camera using prism,” J. Korean Phys. Soc. 13(2), 206-212 (2009).
[5] S. C. Park and S. H. Lee, “Zoom lens design for a 10x slim camera using successive procedures,” J. Korean Phys. Soc. 17(6), 518-524 (2013).
[6] M. C. Chen, “Zoom lens,” U.S. patent 9,829,688 (Nov. 28, 2017).
[7] W. S. Sun and C. L. Tien and Y. H. Liu, “Optical design for the lens depth of a periscope-type 3× zoom lens with 8-megapixel mobile phone,” Optical and Quantum Electronics 52(3), 1-16 (Feb. 10, 2020).
[8] Y. Souma, “Zoom lens, image pickup apparatus and digital equipment,” U.S. patent 7,630,139 (Dec. 8, 2009).
[9] E. Shirota, “Image pickup apparatus having optical path reflecting zoom lens system,” U.S. patent 7,643,223 (Jan. 5, 2010).
[10] Y. Matsumura and T. Iwashita and Y. Kurioka and S. Yamaguchi, “Zoom lens system, imaging device and camera,” U.S. patent 8,320,051 (Nov. 27, 2012).

[11] A. Yamashita, “Zoom lens and image pickup apparatus,” U.S. patent 8,405,914 (Mar. 26, 2013).
[12] M. Katayose and K. Ono and H. Nagaoka and K. Hayakawa, “Zoom lens system for image pickup apparatus,” U.S. patent 8,432,464 (Apr. 30, 2013).
[13] W. Hackemer, “Miniature zoom lens,” U.S. patent 8,605,371 (Dec. 10, 2013).
[14] J. P. Seo, “Zoom lens system and image pickup apparatus,” U.S. patent 8,896,942 (Nov. 25, 2014).
[15] M. Morooka, “Zoom lens and image pickup apparatus equipped with same,” U.S. patent 9,013,803 (Apr. 21, 2015).
[16] T. Fujisaki, “Zoom lens and image pickup apparatus equipped with zoom lens,” U.S. patent 9,128,273 (Sep. 8, 2015).
[17] Y. Kimura, “Zoom lens, optical apparatus and method for manufacturing zoom lens,” U.S. patent 9,134,516 (Sep. 15, 2015).
[18] K. C. Wang and K. S. Hung and H. T. Chen, “Zoom lens and zoom lens module,” U.S. patent 9,140,880 (Sep. 22, 2015).
[19] C. H. Lin, “Zoom lens,” U.S. patent 9,291,805 (Mar. 22, 2016).
[20] D. Arai, “Zoom lens, optical apparatus and method of manufacturing zoom lens,” U.S. patent 9,329,371 (May 3, 2016).
[21] R. Tomioka, “Zoom lens and imaging apparatus,” U.S. patent 9,568,715 (Feb. 14, 2017).
[22] S. Mihara and H. Konishi and T. Hanzawa and M. Watanabe and A. Ishii and T. Takeyama and A. Imamura, “Electronic image pickup system,” U.S. patent 9,696,524 (Jul. 4, 2017).
[23] OmniVision, “OV5675,” in image sensor, https://www.ovt.com/.
[24] R. L. Nicol, et al. “Influence of f-number on colour matrix behaviour,” in IEEE Workshop on Charge-Coupled Devices and Advanced Image Sensors, 84-87 (2005).
[25] EHK., “Contrast, resolution, pixelation, dynamic range and signal-to-noise ratio: Fundamental limits to resolution in fluorescence light microscopy,” J. Microsc 189, 15-24 (1998).
[26] T. Yanai and M. Miki, “Zoom lens and image pickup apparatus using the same,” U.S. patent 8,427,758 (Apr. 23, 2013).
指導教授 孫文信(Wen-Hsin Sun) 審核日期 2023-1-17
推文 facebook   plurk   twitter   funp   google   live   udn   HD   myshare   reddit   netvibes   friend   youpush   delicious   baidu   
網路書籤 Google bookmarks   del.icio.us   hemidemi   myshare   

若有論文相關問題,請聯絡國立中央大學圖書館推廣服務組 TEL:(03)422-7151轉57407,或E-mail聯絡  - 隱私權政策聲明