參考文獻 |
[1] G. F. Engen and C. A. Hoer, "Thru-Reflect-Line: An Improved Technique for Calibrating the Dual Six-Port Automatic Network Analyzer," in IEEE Transactions on Microwave Theory and Techniques, vol. 27, no. 12, pp. 987-993, Dec. 1979.
[2] R. B. Marks, "A multiline method of network analyzer calibration," IEEE Trans. Microw. Theory Techn., vol. 39, no. 7, pp. 1205-1215, July 1991.
[3] M. B. Steer, S. B. Goldberg, G. Rinne, P. D. Franzon, I. Turlik and J. S. Kasten, "Introducing the through-line deembedding procedure," 1992 IEEE MTT-S Microwave Symposium Digest, Albuquerque, NM, USA, 1992.
[4] H. –C. Lu and T. –H. Chu, "The thru-line-symmetry (TLS) calibration method for on-wafer scattering matrix measurement of four-port networks," 2004 IEEE MTT-S International Microwave Symposium Digest (IEEE Cat. No.04CH37535), Fort Worth, TX, USA, 2004.
[5] V. Adamian and B. Cole, "A novel procedure for characterization of multiport high-speed balanced devices," 2006 IEEE International Symposium on Electromagnetic Compatibility, 2006. EMC 2006., Portland, OR, USA, 2006.
[6] D. A. Frickey, "Conversions between S, Z, Y, H, ABCD, and T parameters which are valid for complex source and load impedances," in IEEE Transactions on Microwave Theory and Techniques, vol. 42, no. 2, pp. 205-211, Feb. 1994.
[7] C. -C. Chou (2023). Importance of Accurate Zref Estimation for Transmission Line Characterization based on 2x-thru Calibration. TechRxiv. Preprint. https://doi.org/10.36227/techrxiv.21829845.v1
[8] D. F. Williams and R. B. Marks, "Reciprocity relations in waveguide junctions," in IEEE Transactions on Microwave Theory and Techniques, vol. 41, no. 6, pp. 1105-1110, June-July 1993.
[9] R. B. Marks, and D. F. Williams. “A General Waveguide Circuit Theory.” Journal of research of the National Institute of Standards and Technology vol. 97,5 (1992): 533-562.
[10] Smart Fixture De-embedding (SFD), Clear Signal Solutions. Accessed: June, 2023. [Online] Available: https://clearsig.com/clearsig/tools/, June 2023.
[11] C.-C. Huang, “In-situ de-embedding (ISD),” DesignCon 2020. Accessed: June, 2023. [Online] Available: https://us.ataitec.com/news/
[12] "IEEE Standard for Electrical Characterization of Printed Circuit Board and Related Interconnects at Frequencies up to 50 GHz," in IEEE Std 370-2020 , vol., no., pp.1-147, 8 Jan. 2021
[13] S. -J. Moon, X. Ye and R. Smith, "Comparison of TRL calibration vs. 2x thru de-embedding methods," 2015 IEEE Symposium on Electromagnetic Compatibility and Signal Integrity, Santa Clara, CA, USA, 2015
[14] J. Dunsmore, N. Cheng and Y. -x. Zhang, "Characterizations of asymmetric fixtures with a two-gate approach," 77th ARFTG Microwave Measurement Conference, Baltimore, MD, USA, 2011.
[15] R. B. Marks, D. F. Williams and D. A. Frickey, "Comments on "Conversions between S, Z, Y, h, ABCD, and T parameters which are valid for complex source and load impedances" [with reply]," in IEEE Transactions on Microwave Theory and Techniques, vol. 43, no. 4, pp. 914-915, April 1995.
[16] C. Yoon et al., "Design Criteria and Error Sensitivity of Time-Domain Channel Characterization (TCC) for Asymmetry Fixture De-Embedding," in IEEE Transactions on Electromagnetic Compatibility, vol. 57, no. 4, pp. 836-846, Aug. 2015.
[17] J. Ellison, S. B. Smith, S. Agili. "Using a 2x‐thru standard to achieve accurate de‐embedding of measurements." Microwave and Optical Technology Letters 62.2 (2020): 675-682.
[18] S. A. Smith, Z. Zhang and K. Aygün, "Assessment of 2x Thru De-embedding Accuracy for Package Transmission Line DUTs," 2020 IEEE 29th Conference on Electrical Performance of Electronic Packaging and Systems (EPEPS), San Jose, CA, USA, 2020.
[19] V. Dmitriev-Zdorov, B. Simonovich, and I. Kochikov. "A causal conductor roughness model and its effect on transmission line characteristics." Signal Integrity Journal (2018).
[20] E. Hammerstad and O. Jensen, "Accurate Models for Microstrip Computer-Aided Design," 1980 IEEE MTT-S International Microwave symposium Digest, Washington, DC, USA, 1980.
[21] P. G. Huray et al.,"Impact of copper surface texture on loss: A model that works." DesignCon 2010 1 (2010): 462-483.
[22] J. E. Bracken. "A causal Huray model for surface roughness." Proc. DesignCon. Vol. 4. 2012.
[23] C. -C. Chou, "Comparative Study of the Causality Property of Various Conductor Surface Roughness Models," 2021 IEEE International Symposium on Radio-Frequency Integration Technology (RFIT), Hualien, Taiwan, 2021.
[24] A. R. Djordjevic, R. M. Biljie, V. D. Likar-Smiljanic and T. K. Sarkar, "Wideband frequency-domain characterization of FR-4 and time-domain causality," in IEEE Transactions on Electromagnetic Compatibility, vol. 43, no. 4, pp. 662-667, Nov. 2001.
[25] S. Yong et al., "Resistance Modeling for Striplines with Different Surface Roughness on the Planes," 2020 IEEE International Symposium on Electromagnetic Compatibility & Signal/Power Integrity (EMCSI), Reno, NV, USA, 2020. |