參考文獻 |
[1] J. F. Wilson, Practice and theory of electrochemical machining, 1971.
[2] 朱樹敏, 電化學加工技術, 化學工業出版社, 北京, 2006.
[3] K. P. Rajurkar, M. Sundaram, and A. Malshe, "Review of electrochemical and electrodischarge machining," Procedia Cirp, vol. 6, pp. 13-26, 2013.
[4] F. Klocke, M. Zeis, A. Klink, and D. Veselovac, "Technological and economical comparison of roughing strategies via milling, EDM and ECM for titanium-and nickel-based blisks," Procedia Cirp, vol. 2, pp. 98-101, 2012.
[5] F. Klocke, M. Zeis, A. Klink, and D. Veselovac, "Experimental research on the electrochemical machining of modern titanium-and nickel-based alloys for aero engine components," Procedia Cirp, vol. 6, pp. 368-372, 2013.
[6] G. Zhouzhi, Z. Dong, X. Tingyu, L. Ao, and Z. Di, "Improvement of electrochemical trepanning by using a pictographic insulation sleeve," International Journal of Electrochemical Science, vol. 12, no. 11, pp. 10577-10588, 2017.
[7] X. Hu, D. Zhu, J. Li, and Z. Gu, "Flow field research on electrochemical machining with gas film insulation," Journal of Materials Processing Technology, vol. 267, pp. 247-256, 2019.
[8] C. Guo, J. Qian, and D. Reynaerts, "Electrochemical machining with scanning micro electrochemical flow cell (SMEFC)," Journal of Materials Processing Technology, vol. 247, pp. 171-183, 2017.
[9] D. Wang, Z. Zhu, N. Wang, and D. Zhu, "Effects of shielding coatings on the anode shaping process during counter-rotating electrochemical machining," Chinese Journal of Mechanical Engineering, vol. 29, no. 5, pp. 971-976, 2016.
[10] J. Hung, H. Liu, Y. Chang, K. Hung, and S. Liu, "Development of helical electrode insulation layer for electrochemical microdrilling," Procedia Cirp, vol. 6, pp. 373-377, 2013.
[11] Z. Gu, D. Zhu, T. Xue, A. Liu, and D. Zhu, "Investigation on flow field in electrochemical trepanning of aero engine diffuser," The International Journal of Advanced Manufacturing Technology, vol. 89, pp. 877-884, 2017.
[12] W. Chen, F. Han, and J. Wang, "Influence of pulse waveform on machining accuracy in electrochemical machining," The International Journal of Advanced Manufacturing Technology, vol. 96, pp. 1367-1375, 2018.
[13] T. Koyano, A. Hosokawa, and T. Furumoto, "Analysis of electrochemical machining process with ultrashort pulses considering stray inductance of pulse power supply," Journal of Advanced Mechanical Design, Systems, and Manufacturing, vol. 12, no. 5, pp. JAMDSM0098-JAMDSM0098, 2018.
[14] M. Hewidy, S. Ebeid, K. Rajurkar, and M. El-Safti, "Electrochemical machining under orbital motion conditions," Journal of Materials Processing Technology, vol. 109, no. 3, pp. 339-346, 2001.
[15] X. Jiang, J. Liu, D. Zhu, M. Wang, and N. Qu, "Research on stagger coupling mode of pulse duration and tool vibration in electrochemical machining," Applied Sciences, vol. 8, no. 8, p. 1296, 2018.
[16] H. El-Hofy, "Vibration-assisted electrochemical machining: a review," The International Journal of Advanced Manufacturing Technology, vol. 105, no. 1-4, pp. 579-593, 2019.
[17] H.-P. Tsui, J.-C. Hung, J.-C. You, and B.-H. Yan, "Improvement of electrochemical microdrilling accuracy using helical tool," Materials and Manufacturing Processes, vol. 23, no. 5, pp. 499-505, 2008.
[18] P. Pa, "Design of effective plate-shape electrode in ultrasonic electrochemical finishing," The International Journal of Advanced Manufacturing Technology, vol. 34, pp. 70-78, 2007.
[19] T. Shu, Y. Liu, K. Wang, T. Peng, and W. Guan, "Ultrasonic vibration-aided electrochemical drill-grinding of SLM-printed Hastelloy X based on analysis of its electrochemical behavior," Electrochemistry Communications, vol. 135, p. 107208, 2022.
[20] M. Wang, R. Zhang, Y. Shang, J. Zheng, X. Wang, and X. Xu, "Micro-milling microstructures in air-shielding ultrasonic assisted electrochemical machining," Journal of Manufacturing Processes, vol. 97, pp. 171-184, 2023.
[21] I. Yang, M. S. Park, and C. N. Chu, "Micro ECM with ultrasonic vibrations using a semi-cylindrical tool," International Journal of Precision Engineering and Manufacturing, vol. 10, pp. 5-10, 2009.
[22] W. Natsu, H. Nakayama, and Z. Yu, "Improvement of ECM characteristics by applying ultrasonic vibration," International Journal of Precision Engineering and Manufacturing, vol. 13, pp. 1131-1136, 2012.
[23] 沈哲墉, "超音波振動超音波輔助電化學加工微孔陣列之研究," 國立中央大學, 2020.
[24] S. Skoczypiec, "Research on ultrasonically assisted electrochemical machining process," The International Journal of Advanced Manufacturing Technology, vol. 52, pp. 565-574, 2011.
[25] J. B. Patel, Z. Feng, P. P. Villanueva, and W. N. Hung, "Quality enhancement with ultrasonic wave and pulsed current in electrochemical machining," Procedia Manufacturing, vol. 10, pp. 662-673, 2017.
[26] Z. Gu, W. Zhu, X. Zheng, and X. Bai, "Cathode tool design and experimental study on electrochemical trepanning of blades," The International Journal of Advanced Manufacturing Technology, vol. 100, pp. 857-863, 2019.
[27] Z. Dong, G. Zhouzhi, X. Tingyu, and L. Ao, "Simulation and experimental investigation on a dynamic lateral flow mode in trepanning electrochemical machining," Chinese Journal of Aeronautics, vol. 30, no. 4, pp. 1624-1630, 2017.
[28] A. Ruszaj, M. Zybura, R. Żurek, and G. Skrabalak, "Some aspects of the electrochemical machining process supported by electrode ultrasonic vibrations optimization," Proceedings of the institution of mechanical engineers, part B: journal of engineering manufacture, vol. 217, no. 10, pp. 1365-1371, 2003.
[29] L. Dabrowski and T. Paczkowski, "Computer simulation of two-dimensional electrolyte flow in electrochemical machining," Russian Journal of Electrochemistry, vol. 41, pp. 91-98, 2005.
[30] B. Bhattacharyya, M. Malapati, J. Munda, and A. Sarkar, "Influence of tool vibration on machining performance in electrochemical micro-machining of copper," International Journal of Machine Tools and Manufacture, vol. 47, no. 2, pp. 335-342, 2007.
[31] M. Purcar, A. Dorochenko, L. Bortels, J. Deconinck, and B. Van den Bossche, "Advanced CAD integrated approach for 3D electrochemical machining simulations," Journal of materials processing technology, vol. 203, no. 1-3, pp. 58-71, 2008.
[32] G. H. Liu, Y. Li, X. P. Chen, and S. J. Lv, "Research on side-insulation of tool electrode for micro electrochemical machining," Advanced Materials Research, vol. 60, pp. 380-387, 2009.
[33] S. Ali, S. Hinduja, J. Atkinson, and M. Pandya, "Shaped tube electrochemical drilling of good quality holes," CIRP annals, vol. 58, no. 1, pp. 185-188, 2009.
[34] D. Zhu, D. Zhu, and Z. Xu, "Optimal design of the sheet cathode using W-shaped electrolyte flow mode in ECM," The International Journal of Advanced Manufacturing Technology, vol. 62, pp. 147-156, 2012.
[35] A. Rebschläger, R. Kollmannsperger, and D. Bähre, "Video based process observations of the pulse electrochemical machining process at high current densities and small gaps," Procedia CIRP, vol. 14, pp. 418-423, 2014.
[36] L. Tang and W. Gan, "Utilization of flow field simulations for cathode design in electrochemical machining of aerospace engine blisk channels," The International Journal of Advanced Manufacturing Technology, vol. 72, pp. 1759-1766, 2014.
[37] D. Wang, Z. Zhu, J. Bao, and D. Zhu, "Reduction of stray corrosion by using iron coating in NaNO 3 solution during electrochemical machining," The International Journal of Advanced Manufacturing Technology, vol. 76, pp. 1365-1370, 2015.
[38] J. Yao, Z. Chen, Y. Nie, and Q. Li, "Investigation on the electrochemical machining by using metal reinforced double insulating layer cathode," The International Journal of Advanced Manufacturing Technology, vol. 89, pp. 2031-2040, 2017.
[39] J. Bian, B. Ma, L. Qi, and H. Gao, "Research on Improving the Taper of Hole Processing by Insulation Coating of ECM Cathode," in IOP Conference Series: Materials Science and Engineering, 2020, vol. 842, no. 1: IOP Publishing, p. 012019.
[40] J. Xu, D. Zhu, J. Lin, and X. Hu, "Flow field design and experimental investigation of electrochemical trepanning of diffuser with a special structure," The International Journal of Advanced Manufacturing Technology, vol. 107, pp. 1551-1558, 2020.
[41] G. Liu, H. Tong, Y. Li, and H. Zhong, "Novel structure of a sidewall-insulated hollow electrode for micro electrochemical machining," Precision Engineering, vol. 72, pp. 356-369, 2021.
[42] W. Jingtao, X. Zhengyang, and Z. Di, "Improving profile accuracy and surface quality of blisk by electrochemical machining with a micro inter-electrode gap," Chinese Journal of Aeronautics, vol. 36, no. 4, pp. 523-537, 2023.
[43] 黃俊曄, "放電與超音波振動複合加工添加TIC及SIC粉末對AL-Zn-Mg系合金加工特性之影響," 國立中央大學, 2000.
[44] J. Thorpe and R. Zerkle, "A Theoretical Analysis of the Equilibrium Sinking of Shallow, Axially Symmetric Cavities by Electrochemical Machining," Fundamentals of Electrochemical Machining, Electrochemical Society, Princeton, pp. 1-39, 1971. |