參考文獻 |
參考文獻
【1】Building Code Requirements for Reinforced Concrete(ACI 318-02), American Concrete Institute(2002), Farmington Hills, Michigan.
【2】Manual of Steel Construction ,Load and Resistance Factor
Design(1993), American Institute of Steel Constructions, Chicago.
【3】Standards for Structural Calculation of Steel Reinforced Concrete Structures(AIJ), Architectural Institute of Japan(1993).
【4】Wang, P. T., Shah, S. P. and Naaman, A. E.“Stress-Strain Curves of Normal and Lightweight Concrete in Compression”, ACI Journal, Vol.78 pp.603-611.
【5】Ahmad, S. H., Xie, Y. and Yu, T.(1995), “Shear Ductility of Reinforced Lightweight Concrete Beams of Normal Strength and High Strength Concrete”, Cement and Concrete Composites 17, Jan. pp.147-159.
【6】Khaloo, Ali R. and Bozorgzadeh, A.(2001), “Influence of Confining Hoop Flexural Stiffness on Behavior of High-Strength Lightweight Concrete Columns”, ACI Structural Journal Oct. pp.657-663.
【7】Ahmad, S. H. and Barker, R.(1991), “Flexural Behavior of Reinforced High-Strength Lightweight Concrete Beams”, ACI Structural Journal, Feb. pp.69-77.
【8】Bridge, R. Q. and Roderick.“Behavior of Built-Up Composite Columns”ASCE Journal of Structural Engineering, pp.1141-1156.
【9】Lege’ron, F. and Paultre, P.(2000), “Behavior of High Strength Concrete Columns under Cyclic Flexure and Constant Axial Load”ACI Structural Journal, Vol.97 NO.4, July-August, pp.591-601.
【10】Ricles, and Paboojian,(1994), “Seismic Performance of Steel-Encased Composite Columns”Journal of Structural Engineering-ASCE, Vol.120 Iss.8, pp.2474-2494.
【11】Mirza, S. A. and Skrabek, B. W.(1991), “Reliability of Short Composie Beam-Column Strength Interaction”Journal of Structural Engineering-ASCE.Iss.8, pp.2320-2339.
【12】Nsar-Eddine Koutchoukali and Abdeldjelil Belarbi(2001), “Torsion of High-Strength Reinforced Concrete Beams and Minimum Reinforcement Requirement”ACI Structural Journal, Vol.98, NO.4, July-August .
【13】Hsu H-L. and Wang C-L. (2000), “Flexural-Torsional Behaviour of Steel Reinforced Concrete Members Subjected to Repeated Loading”Earthquake Engineering and Structural Dynamics,Vol.29, pp.667-682.
【14】Kong F-K. , Susanto Teng, Avtar Singh and Tan K-H.(1996), “Effect of Embedment Length of Tension Reinforcement on the Behavior of Lightweight Concrete Deep Beams”ACI Structural Journal, Vol.93, NO.1, January-February
【15】T. D. Gunneswara Rao and D. Rama Seshu“Torsion of Steel Fiber Reinforced Concrete Members”Cement and Concrete Research, Vol.33, pp.1783-1788.
【16】F. K. Birjandi and J. L. Clarke(1993), “Deflection of Lightweight Aggregate Concrete Beams”Magazine of Concrete Research, Vol.45, NO162, March pp.43-49.
【17】陳豪吉、高章育(2002),“輕質骨材混凝土之耐震性質研究”,國立中興大學土木工程研究所,碩士論文,六月。
【18】方一匡、蕭志坤、李俊興(1999),“高性能混凝土預力樑之抗扭行為研究”中國土木水利工程學刊,第十一卷,第三期,pp.493-501。
【19】許協隆、李建輝(2002),“腹版開孔之鋼骨鋼混凝土樑反覆載重試驗研究”中國土木水利工程學刊,第十四卷,第四期,pp.581-590。
【20】陳博亮、李增欽(2001),“以彈塑性破壞力學模式分析混凝土類材料之尺寸效應”技術學刊,第十六卷,第二期,pp.269-276。
【21】翁正强、江銘鴻、陳誠直、林佳宏(2001),“剪力釘對包覆型SRC樑力學行為之影響”中國土木水利工程學刊,第十三卷,第一期, pp.181-192。
【22】翁正强、江銘鴻、顏聖益(2001),“鋼骨鋼筋混凝土(SRC)樑抗彎試驗與力學特性”中國土木水利工程學刊,第十三卷,第二期,pp.249-261。
【23】翁正強、顏聖益、陳誠直、黃明慧(2000),“包覆型鋼骨鋼筋混凝土樑之極限彎矩強度研究”中國土木水利工程學刊,第十二卷,第三期,pp.521-531。
【24】陳正誠,陳建中(2001),“包覆型鋼骨鋼筋混凝土樑之撓曲行為特性”中國土木水利工程學刊,第十三卷,第二期,pp.263-275。
【25】陳正誠、張大鵬、方至楷(2000),“鋼骨鋼筋混凝土短樑之剪力實驗行為”中國土木水利工程學刊,第十二卷,第三期, pp.511-520。
【26】王志倫(1996),“扭矩影響下之鋼骨鋼筋混凝土構件行為”國立中央大學土木工程學系研究所碩士論文,六月。
【27】粱禮麟(2000),“中空鋼骨鋼筋混凝土扭轉撓曲行為研究”國立中央大學土木工程學系研究所碩士論文,七月。
【28】謝宗成(2001),“含斜拉鋼筋之鋼骨鋼筋混凝土撓曲扭轉行為研究”國立中央大學土木工程學系研究所碩士論文,十二月。
【29】陳信成(2004),“鋼骨鋼筋輕質混凝土構件耐震行為”國立中央大學土木工程學系研究所碩士論文,七月。 |