中大機構典藏-NCU Institutional Repository-提供博碩士論文、考古題、期刊論文、研究計畫等下載:作者相关文件
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 78728/78728 (100%)
造访人次 : 34341793      在线人数 : 1410
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜寻范围 查询小技巧：
  • 您可在西文检索词汇前后加上"双引号"，以获取较精准的检索结果
  • 若欲以作者姓名搜寻，建议至进阶搜寻限定作者字段，可获得较完整数据
    •  进阶搜寻

    类别浏览

    正在载入社群分类, 请稍候....

    年代浏览

    正在载入年代分类, 请稍候....

    "LAI,JY"的相关文件  

    回到依作者浏览

    显示 37 项.

    类别 日期 题名 作者 档案
    [大氣物理研究所 ] 期刊論文 1995 Large amplitude vibration of plates according to a higher order deformation theory Chen,CS; Lai,JY; Doong,JL
    [機械工程學系] 期刊論文 2010 Semi-automatic feature point extraction using one seed point Hsu,SH; Lai,JY
    [機械工程研究所] 期刊論文 2009 Extraction of geodesic and feature lines on triangular meshes Hsu,SH; Lai,JY
    [機械工程研究所] 期刊論文 2005 An iterative coordinate setup algorithm for airfoil blades inspection Hsu,TH; Lai,JY; Ueng,WD; Hwang,JZ
    [化學工程與材料工程研究所] 期刊論文 2009 Effect of sorption behavior on transport properties of gases in polymeric membranes Hu,CC; Fu,YJ; Lee,KR; Ruaan,RC; Lai,JY
    [化學工程與材料工程研究所] 期刊論文 2006 The effect of casting solvent on free volume and gas separation properties in high molecular weight poly(methyl methacrylate) membranes Hu,CC; Fu,YJ; Lee,KR; Ruaan,RC; Lai,JY
    [機械工程學系] 期刊論文 2010 Automatic construction of quadrilateral network of curves from triangular meshes Huang,CY; Lai,JY; Lin,KY
    [機械工程學系] 期刊論文 2011 Efficient Segmentation Algorithm for 3D Bone Models Construction on Medical Images Huang,CY; Luo,LJ; Lee,PY; Lai,JY; Wang,WT; Lin,SC
    [機械工程研究所] 期刊論文 2009 Development of feature segmentation algorithms for quadratic surfaces Lai,HC; Chang,YH; Lai,JY
    [機械工程學系] 期刊論文 2010 A partial mesh replacement technique for design modification in rapid prototyping Lai,HC; Lai,JY
    [機械工程研究所] 期刊論文 1996 Minimum zone evaluation of circles and cylinders Lai,JY; Chen,IH
    [機械工程研究所] 期刊論文 1992 ADAPTIVE FLOW-RATE CONTROL OF A HYDRAULIC PROPORTIONAL VALVE LAI,JY; CHEN,YR
    [機械工程學系] 期刊論文 2010 A new registration method for three-dimensional knee nearthrosis model using two X-ray images Lai,JY; Dai,WL; Syu,CB; Shih,KS; Wang,WT; Lin,SC
    [化學工程與材料工程研究所] 期刊論文 1995 PEEL STRENGTH IMPROVEMENT OF SILICONE-RUBBER FILM BY PLASMA PRETREATMENT FOLLOWED BY GRAFT-COPOLYMERIZATION LAI,JY; DENQ,YL; CHEN,JK; YUAN,LY; LIN,YY; SHYU,SS
    [機械工程研究所] 期刊論文 1999 Three-dimensional CAD model reconstruction from image data of computer tomography Lai,JY; Doong,JL; Yao,CY
    [化學工程與材料工程研究所] 期刊論文 1995 POLY(METHYL METHACRYLATE) POLYCARBONATE MEMBRANE FOR GAS SEPARATION LAI,JY; HUANG,SJ; HUANG,SL; SHYU,SS
    [機械工程研究所] 期刊論文 1996 Surface modification of silicone rubber by gas plasma treatment Lai,JY; Lin,YY; Denq,YL; Chen,JK
    [光電科學與工程學系] 期刊論文 2010 Engineered multiwavelength conversion using nonperiodic optical superlattice optimized by genetic algorithm Lai,JY; Liu,YJ; Wu,HY; Chen,YH; Yang,SD
    [機械工程研究所] 期刊論文 1996 Reverse engineering of composite sculptured surfaces Lai,JY; Lu,CY
    [機械工程研究所] 期刊論文 1999 Registration and data merging for multiple sets of scan data Lai,JY; Ueng,WD; Yao,CY
    [機械工程研究所] 期刊論文 2001 G(2) continuity for multiple surfaces fitting Lai,JY; Ueng,WD
    [機械工程研究所] 期刊論文 2000 Reconstruction of surfaces of revolution from measured points Lai,JY; Ueng,WD
    [機械工程研究所] 期刊論文 1994 A STRATEGY FOR FINISH CUTTING PATH GENERATION OF COMPOUND SURFACES LAI,JY; WANG,DJ
    [機械工程研究所] 期刊論文 1995 DYNAMICS OF GRAPHITE-EPOXY COMPOSITE UNDER DELAMINATION FRACTURE AND ENVIRONMENTAL-EFFECTS LAI,JY; YOUNG,KF
    [機械工程研究所] 期刊論文 1997 Interference-free cutting-path generation based on scanning data Lin,CY; Hwang,YY; Lai,JY
    [機械工程研究所] 期刊論文 1997 A surface-lofting approach for smooth-surface reconstruction from 3D measurement data Lin,CY; Liou,CS; Lai,JY
    [化學工程與材料工程研究所] 期刊論文 2002 Adsorption of indomethacin onto chemically modified chitosan beads Mi,FL; Shyu,SS; Chen,CT; Lai,JY
    [化學工程與材料工程研究所] 期刊論文 2003 Asymmetric chitosan membranes prepared by dry/wet phase separation: a new type of wound dressing for controlled antibacterial release Mi,FL; Wu,YB; Shyu,SS; Chao,AC; Lai,JY; Su,CC
    [化學工程與材料工程研究所] 期刊論文 1994 IMPROVEMENT OF ADHESION OF KEVLAR FIBER TO EPOXY BY CHEMICAL MODIFICATION SHEU,GS; LIN,TK; SHYU,SS; LAI,JY
    [機械工程研究所] 期刊論文 2009 Development of automatic surface reconstruction technique in reverse engineering Tsai,YC; Huang,CY; Lin,KY; Lai,JY; Ueng,WD
    [機械工程研究所] 期刊論文 2009 A NURBS CURVE INTERPOLATOR WITH JERK-LIMITED TRAJECTORY PLANNING Tseng,SJ; Lin,KY; Lai,JY; Ueng,WD
    [機械工程研究所] 期刊論文 1998 Sweep-surface reconstruction from three-dimensional measured data Ueng,WD; Lai,JY; Doong,JL
    [機械工程研究所] 期刊論文 2007 Unconstrained and constrained curve fitting for reverse engineering Ueng,WD; Lai,JY; Tsai,YC
    [機械工程研究所] 期刊論文 1998 A sweep-surface fitting algorithm for reverse engineering Ueng,WD; Lai,JY
    [化學工程與材料工程研究所] 期刊論文 1992 PLASMA SURFACE-TREATMENT ON CARBON-FIBERS .1. MORPHOLOGY AND SURFACE-ANALYSIS OF PLASMA ETCHED FIBERS YUAN,LY; CHEN,CS; SHYU,SS; LAI,JY
    [化學工程與材料工程研究所] 期刊論文 1992 PLASMA SURFACE TREATMENTS OF CARBON-FIBERS .2. INTERFACIAL ADHESION WITH POLY(PHENYLENE SULFIDE) YUAN,LY; SHYU,SS; LAI,JY
    [化學工程與材料工程研究所] 期刊論文 1991 PLASMA SURFACE TREATMENTS ON CARBON-FIBERS .2. MECHANICAL PROPERTY AND INTERFACIAL SHEAR-STRENGTH YUAN,LY; SHYU,SS; LAI,JY

    ::: Copyright National Central University. | 國立中央大學圖書館版權所有 | 收藏本站 | 設為首頁 | 最佳瀏覽畫面: 1024*768 | 建站日期：8-24-2009 :::
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 隱私權政策聲明