中大機構典藏-NCU Institutional Repository-提供博碩士論文、考古題、期刊論文、研究計畫等下載:作者相關文件

類別瀏覽

正在載入社群分類, 請稍候....

年代瀏覽

正在載入年代分類, 請稍候....

"葉維磬"的相關文件

類別	日期	題名	作者
[機械工程學系] 研究計畫	2013-12-01	以反應曲面實驗設計法分析超音波振動輔助等通道彎角擠製加工之效應;Experimental Analysis of Effect of Ultrasonic-Vibration on Equal Channel Angular Extrusion (Ecae) Using Surface Response Methodology	葉維磬
[機械工程學系] 研究計畫	2012-12-01	以反應曲面實驗設計的方法探討超音波振動對下料加工的影響;An Investigation into the Effect of Ultrasonic Vibration Superimposed to the Die in Blanking Process Using the Surface Response Methodology Based on Design of Experiments	葉維磬
[機械工程學系] 研究計畫	2012-09-01	以反應曲面實驗設計的方法探討超音波振動對下料加工的影響;An Investigation into the Effect of Ultrasonic Vibration Superimposed to the Die in Blanking Process Using the Surface Response Methodology Based on Design of Experiments	葉維磬
[機械工程學系] 研究計畫	1999-09-01	非對稱壓延板材成型曲率之實驗研究;Experimental Investigation on the Curvature of Asymmetrically Rolling Plates	葉維磬
[機械工程學系] 研究計畫	1996-09-01	通過曲線模擠製問題的滑移線場解及其實驗驗證;Analysis of Sheet Drawing Through Curved Dies Using the Slip-Line Field Theory and Its Experimental Verification	葉維磬
[機械工程學系] 研究計畫	1995-09-01	以平面擠製實驗結果驗証變分上界限方法;Experimental Verification of the Variational Upper-Bound Method Using Plane-Strain Extrusion Tests	葉維磬
[機械工程研究所] 研究計畫	1993-09-01	流旋形加工技術之研究	王有任; 李勝隆; 顏炳華; 葉維磬; 董必正; 王國雄
[機械工程學系] 研究計畫	2011-08-01	鍛粗加工問題的異向性摩擦模式的建立及其應用與實驗驗證;An Anisotropic Frictional Model for the Problem of Upsetting Forgings and Its Application and Experimental Verification.	葉維磬
[機械工程學系] 研究計畫	2010-08-01	非均勻邊界摩擦條件對鍛粗圓環異向性變形的研究; A Study on Anisotropic Deformation Behavior of Upset Forging of Ring.Due to Uneven Boundary Frictional Condition	葉維磬
[機械工程學系] 研究計畫	2008-07-01	板材非對稱壓延之加工參數對其彎曲曲率的研究; A Study on the Effect of Working Parameters on the Curvature of Asymmectric Roolong Sheets	葉維磬
[機械工程學系] 研究計畫	2007-07-01	非對稱壓延加工效應對壓延板材彎曲曲率的理論及實驗分析; The Theoretical and Experimental Analysis of the Effect of Asymmetrical Rolling on the Curvature of the Rolling Material	葉維磬
[機械工程學系] 研究計畫	2006-07-01	渦輪葉片鍛造成形問題的最佳化設計; Die Shape Optimization in Forging of a Turbine Blade Section using FEA Software	葉維磬
[機械工程學系] 研究計畫	2005-07-01	靜可容邊界條件及中立半徑對圓環鍛粗上界限解的影響及其驗證; Effect of Statically Boundary Condition and the Neutral Radius on the Upper-Bound Solution of Upset Forging of Rings with Experimental Verification	葉維磬
[機械工程學系] 研究計畫	2004-07-01	圓環鍛粗加工之變分上界限解的實驗驗證及其與有限元素解之比較; Experimental Verification of the Variational Upper-Bound Solution for Upset Forging of Rings and Its Comparison with FEM Solution	葉維磬
[機械工程學系] 研究計畫	2003-07-01	以內涵塑性理論分析具變形誘導異向性硬化之材料行為; Analysis of Material Behavior of Deformation Induced Anistropy Using The Endochronic Theory of Plasticity	葉維磬
[機械工程學系] 研究計畫	2002-07-01	齒輪鍛造加工之有限元素分析; FEM Analysis of the Forging of Spur Gears	葉維磬
[機械工程學系] 研究計畫	2001-07-01	應用條狀法於平面應變壓延問題之分析與實驗驗證, 兼論硬化模式對解的影響;Analysis and Experimental Verification of Plane-Strain Rolling Problems Using the Slab Method with Investigation of the Effect of Strain-Hardening Models Used on the Results	葉維磬
[機械工程學系] 研究計畫	2000-07-01	三維鍛粗加工之變分上界限解; Variational Upper-Bound of 3 Dimensional Upset Forging	葉維磬
[機械工程學系] 研究計畫	2017-08-01	6061鋁合金累進式背擠製加工之實驗分析;Experimental Analysis of 6061 Aluminum Alloy Produced by Accumulative Back Extrusion.	葉維磬
[機械工程學系] 研究計畫	2016-03-29	以有線元素法及反應曲面法分析傘形齒輪的旋轉鍛造加工問題;Analysis of Colod Rotary Forging of Spur Bevel Gear Using Finite Element and Response Surface Methods	葉維磬
[機械工程學系] 研究計畫	2015-01-08	同步組合加載超音波輔助對等通道彎角擠製加工問題效應的研究;An Investigation on the Effect of Combined Ultra-Sonic Vibrations Synchronically Superimposed on Ecae Problem	葉維磬
[機械工程學系] 研究計畫	1994-07-01	內涵塑性理論之異方向性硬化模式之研究; A Study on the Anisotropic Hardening Model of the Endochronic Theory	葉維磬

資料載入中.....

類別瀏覽

年代瀏覽

"葉維磬"的相關文件