"Wang,KS"的相关文件
回到依作者浏览
显示 64 项.
|
类别 |
日期 |
题名 |
作者 |
档案 |
| [環境工程研究所 ] 期刊論文 |
2009 |
The utilization of thin film transistor liquid crystal display waste glass as a pozzolanic material |
Lin,KL; Huang,WJ; Shie,JL; Lee,TC; Wang,KS; Lee,CH |
 |
| [環境工程研究所 ] 期刊論文 |
2005 |
The thermal conductivity mechanism of sewage sludge ash lightweight materials |
Wang,KS; Tseng,CJ; Chiou,IJ; Shih,MH |
|
| [環境工程研究所 ] 期刊論文 |
2003 |
The reuse of municipal solid waste incinerator fly ash slag as a cement substitute |
Lin,KL; Wang,KS; Tzeng,BY; Lin,CY |
|
| [環境工程研究所 ] 期刊論文 |
2003 |
The recycling of MSW incinerator bottom ash by sintering |
Wang,KS; Tsai,CC; Lin,KL; Chiang,KY |
|
| [機械工程研究所] 期刊論文 |
1988 |
THE OPTIMAL-DESIGN OF A DYNAMIC ABSORBER FOR AN ARBITRARY PLANAR STRUCTURE |
WANG,YZ; WANG,KS |
|
| [環境工程研究所 ] 期刊論文 |
2004 |
The hydration properties of pastes containing municipal solid waste incinerator fly ash slag |
Lin,KL; Wang,KS; Lin,CY; Lin,CH |
|
| [環境工程研究所 ] 期刊論文 |
2004 |
The hydration characteristics when C2S is present in MSWI fly ash slag |
Wang,KS; Lin,KL; Lee,TY; Tzeng,BY |
|
| [環境工程研究所 ] 期刊論文 |
2003 |
The hydration characteristics of MSWI fly ash slag present in C3S |
Lin,KL; Wang,KS; Lee,TY; Tzeng,BY |
|
| [環境工程研究所 ] 期刊論文 |
2001 |
The effects of FeCl3 on the distribution of the heavy metals Cd, Cu, Cr, and Zn in a simulated multimetal incineration system |
Wang,KS; Chiang,KY; Tsai,CC; Sun,CJ; Tsai,CC; Lin,KL |
|
| [機械工程研究所] 期刊論文 |
1999 |
The development of modular-based design in considering technology complexity |
Tsai,YT; Wang,KS |
|
| [環境工程研究所 ] 期刊論文 |
1998 |
The characteristics study on sintering of municipal solid waste incinerator ashes |
Wang,KS; Chiang,KY; Perng,JK; Sun,CJ |
|
| [環境工程研究所 ] 期刊論文 |
2004 |
The., hydration characteristics and utilization of slag obtained by the vitrification of MSWI fly ash |
Lin,KL; Wang,KS; Tzeng,BY; Lin,CY |
|
| [土木工程學系 ] 期刊論文 |
2010 |
Study on cement mortar and concrete made with sewage sludge ash |
Chang,FC; Lin,JD; Tsai,CC; Wang,KS |
|
| [機械工程研究所] 期刊論文 |
2000 |
Study of loading policies for unequal strength shared-load system |
Wang,KS; Huang,JJ; Tsai,YT; Hsu,FS |
|
| [機械工程學系] 期刊論文 |
2011 |
STUDY OF HAZARD RATE FUNCTIONS ON THE CUMULATIVE DAMAGE PHENOMENON |
Wang,KS |
|
| [機械工程研究所] 期刊論文 |
1991 |
STRESS-ANALYSIS OF AN ELASTIC BODY WITH A WAVY SURFACE |
WANG,KS; YANG,YP; CHU,CM |
|
| [環境工程研究所 ] 期刊論文 |
2001 |
Stabilization of heavy metals in sewage sludge composting process |
Chiang,KY; Yoi,SD; Lin,HN; Wang,KS |
|
| [環境工程研究所 ] 期刊論文 |
2001 |
Recovery of heavy metals in electrostatic precipitator ash by carbon dioxide as a pre-extraction reagent |
Chiang,KY; Huang,LM; Lee,YS; Wang,KS |
|
| [環境工程研究所 ] 期刊論文 |
2011 |
Preparation of humidity-controlling porous ceramics from volcanic ash and waste glass |
Vu,DH; Wang,KS; Nam,BX; Bac,BH; Chu,TC |
|
| [機械工程學系] 期刊論文 |
2010 |
Performance States Estimation of System Using Bayesian Method and Fuzzy Signal Information |
Tsai,YT; Wang,KS; Lin,HY |
|
| [機械工程研究所] 期刊論文 |
1985 |
OPTIMUM DESIGN OF DYNAMIC ABSORBER FOR A RANDOM-EXCITED MACHINE MOUNTED ON A PLATELIKE STRUCTURE FOUNDATION |
WANG,KS; WANG,YZ; WANG,RT |
|
| [機械工程研究所] 期刊論文 |
1988 |
OPTIMUM DESIGN OF 3-ELEMENT DYNAMIC ABSORBER IN RANDOM-EXCITED MACHINE-FLOOR SYSTEM |
WANG,YZ; WANG,KS; LEE,KC |
|
| [機械工程研究所] 期刊論文 |
2001 |
Optimizing preventive maintenance for mechanical components using genetic algorithms |
Tsai,YT; Wang,KS; Teng,HY |
|
| [機械工程研究所] 期刊論文 |
2000 |
Optimization of the electrical discharge machining process based on the Taguchi method with fuzzy logics |
Lin,JL; Wang,KS; Yan,BH; Tarng,YS |
|
| [機械工程研究所] 期刊論文 |
1991 |
OPTIMAL SELECTION OF STANDARD-DEVIATION OF DESIGN VARIABLES BASED ON RELIABILITY REQUIREMENT |
WANG,KS; HSU,FS |
|
| [化學工程與材料工程研究所] 期刊論文 |
1997 |
New inverse spinel cathode materials for rechargeable lithium batteries |
Fey,GTK; Wang,KS; Yang,SM |
|
| [機械工程研究所] 期刊論文 |
2000 |
Modelling and optimization of turning processes for slender parts |
Lin,WS; Wang,KS |
|
| [化學工程與材料工程研究所] 期刊論文 |
2002 |
Modeling the bathtub shape hazard rate function in terms of reliability |
Wang,KS; Hsu,FS; Liu,PP |
|
| [環境工程研究所 ] 期刊論文 |
2009 |
Melting of municipal solid waste incinerator fly ash by waste-derived thermite reaction |
Wang,KS; Lin,KL; Lee,CH |
|
| [機械工程研究所] 期刊論文 |
1998 |
Loading adjustment policy of a two-unit shared-load system based on reliability management |
Wang,KS; Huang,JJ; Po,HJ |
|
| [機械工程研究所] 期刊論文 |
1997 |
Loading adjustment for fatigue problem based on reliability considerations |
Wang,KS; Shen,YC; Huang,JJ |
|
| [環境工程研究所 ] 期刊論文 |
2005 |
Lightweight properties and pore structure of foamed material made from sewage sludge ash |
Wang,KS; Chiou,IJ; Chen,CH; Wang,D |
|
| [環境工程研究所 ] 期刊論文 |
2003 |
Latent hydraulic reactivity of blended cement incorporating slag made from municipal solid waste incinerator fly ash |
Wang,KS; Lin,KL; Tzeng,BY |
|
| [環境工程研究所 ] 期刊論文 |
2001 |
Hydraulic activity of municipal solid waste incinerator fly-ash-slag-blended eco-cement |
Wang,KS; Lin,KL; Huang,ZQ |
|
| [環境工程研究所 ] 期刊論文 |
2003 |
Hydraulic activity of cement mixed with slag from vitrified solid waste incinerator fly ash |
Lin,KL; Wang,KS; Tzeng,BY; Lin,CY |
|
| [環境工程研究所 ] 期刊論文 |
2011 |
Humidity control porous ceramics prepared from waste and porous materials |
Vu,DH; Wang,KS; Bac,BH |
|
| [機械工程研究所] 期刊論文 |
2002 |
General phase-matching condition for a quantum searching algorithm |
Li,CM; Hwang,CC; Hsieh,JY; Wang,KS |
|
| [環境工程研究所 ] 期刊論文 |
2001 |
Formation of heavy metal species during PVC-containing simulated MSW incineration |
Chiang,KY; Wang,KS; Tsai,CC; Sun,CJ |
|
| [環境工程研究所 ] 期刊論文 |
2004 |
Foamed lightweight materials made from mixed scrap metal waste powder and sewage sludge ash |
Wang,KS; Chiou,IJ |
|
| [環境工程研究所 ] 期刊論文 |
1997 |
Fate and partitioning of heavy metals affected by organic chloride content during a simulated municipal solid waste incineration process |
Wang,KS; Chiang,KY; Chu,WT |
|
| [環境工程研究所 ] 期刊論文 |
2009 |
Enhancing performance and durability of slag made from incinerator bottom ash and fly ash |
Chiou,IJ; Wang,KS; Tsai,CC |
|
| [環境工程研究所 ] 期刊論文 |
2001 |
Effects of the type of sintering atmosphere on the chromium leachability of thermal-treated municipal solid waste incinerator fly ash |
Wang,KS; Sun,CJ; Liu,CY |
|
| [機械工程學系] 期刊論文 |
2011 |
Effects of loading adjustment on the reliability degradation of composites |
Chen,CL; Wang,KS |
|
| [環境工程研究所 ] 期刊論文 |
1999 |
Effects of chlorides on emissions of toxic compounds in waste incineration: Study on partitioning characteristics of heavy metal |
Wang,KS; Chiang,KY; Lin,SM; Tsai,CC; Sun,CJ |
|
| [環境工程研究所 ] 期刊論文 |
1999 |
Effects of chlorides on emissions of hydrogen chloride formation in waste incineration |
Wang,KS; Chiang,KY; Lin,SM; Tsai,CC; Sun,CJ |
|
| [環境工程研究所 ] 期刊論文 |
2001 |
Effects of a water-extraction process on heavy metal behavior in municipal solid waste incinerator fly ash |
Wang,KS; Chiang,KY; Lin,KL; Sun,CJ |
|
| [土木工程研究所] 期刊論文 |
2004 |
Effects of Al2O3 on the hydration activity of municipal solid waste incinerator fly ash slag |
Lin,KL; Wang,KS; Tzeng,B; Wang,NF; Lin,CY |
|
| [機械工程研究所] 期刊論文 |
1993 |
EDGE CRACK-PROPAGATION UNDER SLIDING LOAD |
WANG,KS; CHU,CM |
|
| [機械工程研究所] 期刊論文 |
1994 |
EDGE CRACK-GROWTH FOR LINEAR ELASTIC BODY WITH WAVY SURFACE |
WANG,KS; CHU,CM |
|
| [機械工程研究所] 期刊論文 |
1996 |
Dynamic reliability models for fatigue crack growth problem |
Wang,KS; Chang,ST; Shen,YC |
|
| [機械工程研究所] 期刊論文 |
1997 |
Dynamic reliability behavior for sliding wear of carburized steel |
Wang,KS; Chen,CS; Huang,JJ |
|
| [機械工程研究所] 期刊論文 |
1995 |
DECISION LEARNING ABOUT PRODUCTION CONTROL AS MACHINES BREAK DOWN IN A FLEXIBLE MANUFACTURING SYSTEM |
WANG,KS; HSIA,HW; ZHUANG,ZD |
|
| [環境工程研究所 ] 期刊論文 |
2009 |
Comparison of leaching characteristics of heavy metals in APC residue from an MSW incinerator using various extraction methods |
Chiang,KY; Tsai,CC; Wang,KS |
|
| [環境工程研究所 ] 期刊論文 |
1997 |
Chloride effects on the speciation and partitioning of heavy metal during the municipal solid waste incineration process |
Chiang,KY; Wang,KS; Lin,FL; Chu,WT |
|
| [機械工程研究所] 期刊論文 |
2009 |
CHARACTERISTICS OF RELIABILITY-DEPENDENT HAZARD RATE FOR COMPOSITES UNDER FATIGUE LOADING |
Chen,CL; Tsai,YT; Wang,KS |
|
| [機械工程學系] 期刊論文 |
2011 |
Bayesian decision theory for support vector machines: Imbalance measurement and feature optimization |
Hsu,CC; Wang,KS; Chang,SH |
|
| [機械工程研究所] 期刊論文 |
1997 |
A study of replacement policy for components in a mechanical system |
Wang,KS; Tsai,YT; Lin,CH |
|
| [機械工程研究所] 期刊論文 |
2003 |
A study of modularity operation of systems based on maintenance consideration |
Tsai,YT; Wang,KS; Lo,SP |
|
| [機械工程研究所] 期刊論文 |
2004 |
A study of availability-centered preventive maintenance for multi-component systems |
Tsai,YT; Wang,KS; Tsai,LC |
|
| [機械工程研究所] 期刊論文 |
1993 |
A PRELIMINARY INVESTIGATION OF NEW MECHANICAL PRODUCT DEVELOPMENT BASED ON RELIABILITY THEORY |
WANG,KS; WAN,EH; YANG,WG |
|
| [機械工程研究所] 期刊論文 |
2000 |
An investigation into improving worn electrode reliability in the electrical discharge machining process |
Lin,JL; Wang,KS; Yan,BH; Tarng,YS |
|
| [機械工程研究所] 期刊論文 |
1993 |
AN INTELLIGENT DECISION SYSTEM FOR A MODERN MANUFACTURING SYSTEM |
WANG,KS; HSIA,HW; ZHUANG,ZD |
|
| [機械工程研究所] 期刊論文 |
2001 |
A new approach for determining the reliability of a cutting tool |
Wang,KS; Lin,WS; Hsu,FS |
|
| [機械工程研究所] 期刊論文 |
2002 |
Analysis of equivalent dynamic reliability with repairs under partial information |
Wang,KS; Po,HJ; Hsu,FS; Liu,CS |
|
|
