中大機構典藏-NCU Institutional Repository-提供博碩士論文、考古題、期刊論文、研究計畫等下載:Item 987654321/1003
English  |  正體中文  |  简体中文  |  Items with full text/Total items : 76645/76646 (100%)
Visitors : 39751652      Online Users : 663
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
Scope Tips:
  • please add "double quotation mark" for query phrases to get precise results
  • please goto advance search for comprehansive author search
  • Adv. Search
    HomeLoginUploadHelpAboutAdminister Goto mobile version


    Please use this identifier to cite or link to this item: http://ir.lib.ncu.edu.tw/handle/987654321/1003


    Title: 考慮LRFD構材強度與使用性需求之鋼結構輕量化設計
    Authors: 陳振邦;C-B Chen
    Contributors: 土木工程研究所
    Keywords: 輕量化設計;鋼結構構架;P-Δ效應;離散拉格朗日法;LRFD;steel frameworks;minimum weight design;P-D effect;discrete Lagrangian method;LRFD
    Date: 2005-07-11
    Issue Date: 2009-09-18 17:17:41 (UTC+8)
    Publisher: 國立中央大學圖書館
    Abstract: 本文主要是使用離散拉格朗日法(Discrete Lagrangian Method, DLM)針對鋼結構構架進行輕量化設計,最佳化設計的束制條件是根據AISC-LRFD規範之局部挫屈及強度檢核公式來建立,構材斷面則限制由AISC-LRFD設計手冊中的型鋼斷面選取。構架系統可為斜撐構架或空構架,斜撐型式為對角斜撐以及K型斜撐。結構分析時採線性分析,並可考慮P-D效應。平面鋼構架的設計結果顯示:含K型斜撐的鋼構架雖可大幅度降低其結構重量,但因柱構材的勁度相對較低,易於過早形成塑鉸,故透過非線性側推分析的結果顯示構架的極限側向變位反而降低。另外,在本研究的算例中,P-D效應的影響並不明顯,以單跨十層樓平面構架的算例為例,設計時考慮P-D效應只會使得結構重量較重約2%,差異並不大。會造成此P-D效應影響較小的原因,主要是設計時考慮樓層相對位移的束制條件,使得P-D效應的影響因而降低。 In this report, the minimum weight design of 2-D and 3D steel frameworks using the discrete Lagrangian method (DLM) is presented. The strength and serviceability requirements specified in the AISC-LRFD specifications are used to construct the constraint functions for the design problems. All the members are selected from the standard hot-rolled steel sections available in the AISC-LRFD design manual. The structural systems can be braced and unbraced steel frameworks. Linear-elastic analysis, with or without P-D effect, are implemented in the DLM design procedure. Several benchmark problems are designed using the proposed DLM searching procedure. Comparison of DLM design results with those presented in the literature are discussed. The optimum weight and ultimate lateral load capacities of diagonal-braced, K-braced and unbraced steel frameworks are also discussed in this report. It is shown that the final weight of the designed frameworks with K-bracings is the lowest; while its ultimate lateral displacement is also the lowest one. Because story drift constraint has been considered in the design, the optimum weights of the designed structures are not significantly influenced by the P-D effect.
    Appears in Collections:[Graduate Institute of Civil Engineering] Electronic Thesis & Dissertation

    Files in This Item:

    File SizeFormat


    All items in NCUIR are protected by copyright, with all rights reserved.

    社群 sharing

    ::: Copyright National Central University. | 國立中央大學圖書館版權所有 | 收藏本站 | 設為首頁 | 最佳瀏覽畫面: 1024*768 | 建站日期:8-24-2009 :::
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 隱私權政策聲明