中大機構典藏-NCU Institutional Repository-提供博碩士論文、考古題、期刊論文、研究計畫等下載:Item 987654321/1650
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 66984/66984 (100%)
造访人次 : 23057961      在线人数 : 223
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜寻范围 查询小技巧:
  • 您可在西文检索词汇前后加上"双引号",以获取较精准的检索结果
  • 若欲以作者姓名搜寻,建议至进阶搜寻限定作者字段,可获得较完整数据
  • 进阶搜寻


    jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/1650


    题名: 以DSP與FPGA實現感應電動機驅動系統;Implementation of Induction Motor Drive System with DSP and FPGA
    作者: 許順興;Shuen-Shing Shin
    贡献者: 光機電工程研究所
    关键词: 驅動器;磁場導向控制;向量控制;感應馬達;DSP;FPGA;induction motor;vector control;field-oriented control
    日期: 2006-07-10
    上传时间: 2009-09-21 09:57:04 (UTC+8)
    出版者: 國立中央大學圖書館
    摘要: 本論文主要研究一全數位化的感應馬達驅動系統以供業界執行高效能的運動控制及相關的應用。本文提出的數位化的感應馬達驅動系統主要是由DSP-FPGA雙核心控制器及智慧型電晶體驅動模組。控制迴路主要是速度控制迴路及位置控制迴路。雙核心控制器可以實現感應馬達的位置控制以達到高效能運動控制應用。本論文所使用的馬達是由東方馬達製作的,規格為3相4極AC馬達,額定功率60W,額定轉速1550rpm,並裝上一解析度為1000脈波每轉。此馬達可以控制在廣泛的速度範圍並有良好的動態響應。實驗結果證明所提出的控制法則可使一低成本的感應馬達精準達到我們想要的位置。 This thesis presents the development of digital induction motor driver technology for high-performance motion control applications. The constructed digital induction driver is composed of a DSP-FPGA hybrid based control module and an intelligent power module. The control module consists of a velocity controller and a position controller. The dual controllers were used to realize all the control functions for the positioning control of an induction motor for high-performance motion control applications. The induction motors were traditionally used for low-cost low-performance adjustable speed applications in appliance and manufacturing equipment. The constructed induction driver has been applied to the position control of an induction motor produced by ORIENTAL MOTOR Electric Co. The motor is a three-phase, 4-pole, AC induction motor with a rating of 60 W, 1550 rpm, and has been equipped with an 1000 pulse/rev encoder. The motor can be controlled at wide range of speed and has fast dynamic response. Experimental results prove the feasibility of implementing precision motion control system using low-cost induction motors with proposed control technique.
    显示于类别:[光機電工程研究所 ] 博碩士論文

    文件中的档案:

    档案 大小格式浏览次数
    0KbUnknown812检视/开启


    在NCUIR中所有的数据项都受到原著作权保护.

    社群 sharing

    ::: Copyright National Central University. | 國立中央大學圖書館版權所有 | 收藏本站 | 設為首頁 | 最佳瀏覽畫面: 1024*768 | 建站日期:8-24-2009 :::
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 回馈  - 隱私權政策聲明