脈衝電化學加工過程中氣泡觀測與分析; Air Bubble is Observed and Analyzed in the Pulse Electrochemical Machining

NCU Institutional Repository > 工學院 > 機械工程研究所 > 博碩士論文 > Item 987654321/2167

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/2167

题名:	脈衝電化學加工過程中氣泡觀測與分析;Air Bubble is Observed and Analyzed in the Pulse Electrochemical Machining
作者:	官佳儒;Chia-Ju Kuan
贡献者:	機械工程研究所
关键词:	脈衝頻率;空隙分數;脈衝電化學加工;PECM;pulse frequency;Void Fraction
日期:	2002-06-27
上传时间:	2009-09-21 11:39:55 (UTC+8)
出版者:	國立中央大學圖書館
摘要:	脈衝電化學加工〈PECM〉是利用有規律的間歇供電進行間歇加工。而空隙分數是影響加工品質的重要因素之一。本實驗使用透明壓克力模具模擬流場場區，以氯化鈉水溶液作為電解液，並藉由控制脈衝頻率及電場、熱流場等參數，分析各參數對空隙分數〈Void Fraction〉的影響度。實驗結論指出，影響空隙分數的氣泡層厚度隨著脈衝頻率減少而減少；而增加電壓、增加電解液濃度或降低流速會使氣泡層增厚。因此加工時若能配合固定電壓與濃度並控制電解液流速則可找出脈衝頻率與電解液流速的最適化條件進而有效降低空隙分數，提高產品生產品質。 In the pulse electrochemical machining (PECM) a regular intermittent power is used to machine the product intermittently. However, the void fraction is the key factor for the product’s quality. In this experiment, a clear acrylic module is used to simulate the fluid field where the sodium chloride solution is chosen as the electrolyte. The pulse frequency, the electric field related parameters and thermal flow field related parameters are controlled to analyze the influence of parameters the void fraction. Results show that the thickness of the boubble which effects the void fraction would decreases as the pulse frequency decreases. On the other hands, the thickness of the bubble increases as the voltage increases, the electrolyte concentration increases or the electrolyte flow speed decreases. Therefore, by fixing the voltage and concentration and well controlling the electrolyte flow speed, a optimal condition between the pulse frequency and the electrolyte flow velocity can be achieved. In turn, the void fraction decreases and the product quality is thus improved effectively.
显示于类别:	[機械工程研究所] 博碩士論文

文件中的档案:

档案	大小	格式	浏览次数

在NCUIR中所有的数据项都受到原著作权保护.

社群 sharing

数据加载中.....