English  |  正體中文  |  简体中文  |  Items with full text/Total items : 66984/66984 (100%)
Visitors : 22683558      Online Users : 205
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
Scope Tips:
  • please add "double quotation mark" for query phrases to get precise results
  • please goto advance search for comprehansive author search
  • Adv. Search
    HomeLoginUploadHelpAboutAdminister Goto mobile version


    Please use this identifier to cite or link to this item: http://ir.lib.ncu.edu.tw/handle/987654321/2416


    Title: 平板式固態氧化物燃料電池雙極板之流道設計與流場觀測;Flow Visualization and Channel Design of Bipolar Plates for a Planar Solid Oxide Fuel Cell
    Authors: 顏正和;Cheng-Ho Yen
    Contributors: 機械工程研究所
    Keywords: 流道設計;平板式;雙極板;固態氧化物燃料電池;燃料電池;流場觀測;planar;bipolar plate;SOFC;flow visualization;channel design;solid oxide fuel cell;fuel cell
    Date: 2004-09-17
    Issue Date: 2009-09-21 11:46:16 (UTC+8)
    Publisher: 國立中央大學圖書館
    Abstract: 固態氧化物燃料電池是一個乾淨的能源轉換裝置,其不需經由燃燒過程,便可將燃料的化學能直接轉換成電能。雙極板是固態氧化燃料物電池的重要元件之一,其主要功能是使燃料氣體與空氣能均勻分佈進入活動反應區,來增加燃料的利用率。本研究使用染劑來針對一平板式SOFC雙極版之流道,以導流板設計佐以流場觀測,實驗量測分析雙極板流道流場之均勻度和速度分佈,並探討不同雙極板之流道流場分佈情形,以及雙極板在加入導流板後,導流板對於流道流場分佈有何影響。實驗結果顯示,雙極板兩進氣口中間凸出的部分距流道入口的長度,對於流體在雙極板流道內的分佈影響不大。反觀,實際影響流體在雙極板流道內的分佈,主要是受進氣口扇形區域的幅度大小與流道出口處距離排氣口的距離等影響。而藉由使用導流板,可使流道流場能均勻滲透通過電極,以增加電池的整體效能。 Solid oxide fuel cell (SOFC) is a clean energy conversion device. It converts the chemical energy of a fuel directly into the electric energy without combustion. The bipolar plate is a key component of SOFCs. The major function of the bipolar plate is to distribute uniformly the gaseous fuel and air over the active areas and thus increases the efficiency of fuel usage. This thesis simulates experimentally the flow behaviors in the channels of the bipolar plate of a planar SOFC using flow dye visualization. Focuses are on the uniformity of the flow in the channels, measurements of the mean velocity distributions, and effects of flow Reynolds number. The results show that the influence of the distance from the inlet of channels to the middle prominent part between the two inlets of the bipolar plate is insignificant for the flow uniformity in the channels. Two important factors that influence the flow distribution of the channels in the bipolar plate are formed to be the range of fan-shaped area near the inlet and the distance from the outlet of the channels to the final outlet. Moreover, using the guide vanes in the bipolar plate can make the flow distribution of the channels much more uniformly over the electrodes and thus could increase the whole efficiency of fuel cells.
    Appears in Collections:[機械工程研究所] 博碩士論文

    Files in This Item:

    File SizeFormat
    0KbUnknown630View/Open


    All items in NCUIR are protected by copyright, with all rights reserved.

    社群 sharing

    ::: Copyright National Central University. | 國立中央大學圖書館版權所有 | 收藏本站 | 設為首頁 | 最佳瀏覽畫面: 1024*768 | 建站日期:8-24-2009 :::
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - Feedback  - 隱私權政策聲明